I really like the clean look except the trigger with the stars. If I get this one, it's pure for aesthetics and some targetshooting. Would replace the trigger, hammer, hopup rubber and get greyish sandcolor grips.
Picked one up. It has a nice finish like finely brushed aluminium. Yes same problem , the trigger has a squishy feel when pressing against the grip safety. Furthermore I added tape, a glob of superglue layer or a bit of velt to get rid of the rattling barrel.
When I replaced the trigger I found out that the original trigger had no adjustable stopscrew that should hit against the solid mag release part inside.
I'm considering this as a 2nd gun even though I already have a Cybergun/AW 1911A1 with colt markings (AP series). Just a thought, will there be problems if I remove the NE31's complete slide assembly except recoil spring and guide, then put the complete slide assembly of the CG/AW 1911A1 (AP series) on the NE31 silver frame, reuse the spring and longer spring guide of the NE31?
I really like the clean look except the trigger with the stars.
If I get this one, it's pure for aesthetics and some targetshooting. Would replace the trigger, hammer, hopup rubber and get greyish sandcolor grips.
Picked one up. It has a nice finish like finely brushed aluminium. Yes same problem , the trigger has a squishy feel when pressing against the grip safety. Furthermore I added tape, a glob of superglue layer or a bit of velt to get rid of the rattling barrel.
thank you for your info!
When I replaced the trigger I found out that the original trigger had no adjustable stopscrew that should hit against the solid mag release part inside.
提一提你，其實grip safety卡住trigger問題不用磨/加工任何零件，只要調校三义片對grip safety既力度輕一點即可解決卡住trigger問題。
I seeeee, 唔該哂
Thank you for the video!
Nice
So, if you replace some internals, and the slide release, it would have better performance
just hop rubber would be also good to go
請問有沒有試co2彈匣???
小弟入手左尼支,查閱資料,它有出CO2彈匣,
CO2會不會更猛?
I'm considering this as a 2nd gun even though I already have a Cybergun/AW 1911A1 with colt markings (AP series). Just a thought, will there be problems if I remove the NE31's complete slide assembly except recoil spring and guide, then put the complete slide assembly of the CG/AW 1911A1 (AP series) on the NE31 silver frame, reuse the spring and longer spring guide of the NE31?
"CABOT GUNS" style 1911
ohhh yes! just checked them out, thanks for info
做唔到powerstroke可能係因為slide個卡位做長左唔可以用slide個斜角推個slidelock落去，你睇返marui係短d所以marui做到。(個人推斷)
Hmmm, 要再試真D先知。 Thz for info!
I’m still gonna get it
that's the spirit!
其實呢個靶場個收費係點㗎, 睇極都唔明, 師兄可唔可以解釋一下
簡單咁講， $100 入會。 之後選擇月費計劃或按次收費 . 按次大約200 ， 冇限時（除非中間有人包場）. 月費依家唔知幾多，月費就無限次去
@@BigCrocAirsoft 假如要同班friend去, 啫係每個人都要畀會費(第一次)十200蚊？
係, 但第一次好似有試玩2個鐘+入會= $100 。 但依家唔係太清楚仲有冇,可以幫你問
@@BigCrocAirsoft 麻煩曬師兄, 有冇話最少要有幾多人去？
@@ump45hk30 一個人去都得，不過range 係共用，有機會要同人share, 不過依家因為疫情, 如果4個人book 可以做到包場，不過有時間限制。
Thank you for this video