How To Tool a Basket Stamp Belt
HTML-код
- Опубликовано: 17 янв 2021
- Here I show you how to tool a basket stamped belt. I just use a scrap piece of leather but the same principles apply when tooling a whole belt.
Check out these floral pattern packs I have available-
www.etsy.com/listing/94502404... 
Хобби
![Oscar Maydon x Junior H - Volver Al Futuro [Official Video]](http://i.ytimg.com/vi/sa52xabMSB8/mqdefault.jpg)
Great video tutorial. I’m fixing to do my first. I’ve been practicing with scrape for about 3 months. Now I believe I’ll make the belt.
Right on! Let me know how it goes
Nice video . I like how you explained the size of Mallets .
Thank you for this rather lucid instructional video. Very generous of you to share.
You bet. Thanks for watching
Thanks, yes I'm watching the other videos. You are very kind and above all very good, congratulations
I appreciate it!
⭐️ good clear presentation and very helpful 😎 ⭐️ thanks for sharing your knowledge 👍
Thank you for watching. I’m glad you found it helpful!
That was a great explanation how you line up the first corner of the basket weave stamp with the first indent, on down the line, made a lot of sense to me I appreciate how you explained that. Thanks
Glad it helped!
you probably dont give a damn but does someone know a way to log back into an instagram account??
I was stupid forgot my password. I would love any tricks you can give me
@Kameron Desmond Instablaster =)
Great tutorial!
Thank you! Be sure to check out my pattern packs link in bio
FROM 🇪🇦. THANKS A LOT. VERY INSTRUCTIVE.
Thank you for watching! Glad it was helpful
Great vid. More drawing tutorials would be great to
DESDE 🇪🇦. MUCHAS GRACIAS. MUY INSTRUCTIVO.
I enjoyed the video. Excited to start on my first belt. Thanks for the tutorial. 77k views is killer !
Glad you found it helpful!
Very good 👍
Nice job man I didn't think to center line for straightness I've just been eyeballing it ,I'm still new I ain't on yalls level yet
Glad it was helpful!
great job thank you
You’re welcome, thanks for watching!
Thank you!
Good work
Thank you
It,s very good, thank you🙏🌹😍
Very nice
Большое спасибо!Всё ясно и понятно!
I think is important to begin at the inside and work from there carefully to the outsides.
Thanks for the tutorial. You present some great pointers. Are you still using the 2lb maul with the camouflager?
No i don’t, for the camouflage I switch to a 16oz maul because it’s not required to hit it as hard, only benefit to sticking with a 2lb would be the good workout
I use the little plastic tool from Tandy that the swivel knife fits into to make sure I cut a straight line. I can do it without the tool, but if I make a mistake it lowers the value of the belt, plus it's faster.
I’ll have to check that out! Thanks for sharing
Just use a normal straight edge as a guide
@@mjbailey404 Kind of difficult to use a straight edge on a 40+ inch belt.
@@MountainFisher Because it tips? Put another piece of leather same/similar thickness next to it so the straight edge lies flat. Make sure you leave a bit of space for the distance between edger side and actual cutting point, you can guess or sight that part. Usually pretty quick because I can just lay another belt blank next to it, set it maybe 1/32 off on each end by eye, then run the line
Ty
Awesome work! Where did you buy your basket stamp from?
Excellent video.. like your attention to the details… what does the edge bevel tool look like?
They come in all different shapes and sizes but it’s got one side that’s straight up and down and then one side that’s angled. I show it a bit more in depth in my video about basic tooling!
great job congratulations. What technique did you then use to color the belt?
Thank you! I have another video explaining how I color but basic overview is , fiebings pro dye, fiebings neatsfoot oil, Tandy neat lac, fiebings antique paste, Tandy neat lac, and then fiebings leather sheen
many thanks for the great tutorial, using your method i have just basket stamped a whole 5ft long belt... granted,, mine does not look as good as yours😀 but for my first attempt, i am happy ,, the next one will be better.. can you tell me what you stuck to the flesh side to prevent stretching please, ive tried regular painters tape, but i still got a lot of stretching.. best regards
Glad to hear it helped! I just use painters tape. I have found that it helps to put it on while it’s dry and it’ll stick better
I usually use some water on surface ago press stamp.isn't it necessary ?
Your job excellent bro.greetings from Turkiye
ty
Nice video and great detail. The only suggestion is to attach your camera to a separate surface to eliminate the bounce of the camera when tapping the stamps.
Thanks for the tip!
Kool 👍
Hello when these belts are finished , have you dyed over the edge?? To get the dark edge, or did you airbrush the edge ? Cheers
On edges I go back and forth on what I use. Lately I’ve been just using the Fiebings pro dye after I burnish!
I would like to make banjo/guitar straps. What leather would you use for that and what’s your source for all your tools and leather ? Just want to make them for me and my friends.
I would make it similar to a belt. So 8/9oz veg tan tooling leather on top and then line with 2/3oz Veg tan. I use grade A tooling leather from Montana leather company and then I get my tools from Barry king for stamping! Hope that helps!
So you would use two pieces of leather stitched together?
@@bobbywilliams780 yes. You don’t have to but it’s just an extra step that creates a nicer product
Awesome video and well explained. But hasn't someone invented or made some sort of embossing tools that are much larger / longer ie 3 or 4 inches long so that you can lay a pattern down an entire belt blank much more efficiently?
Yes but it wouldn’t make sense for me to do that being a small custom shop only doing a few a month, it’s like the difference between driving and walking, driving is quicker but it makes sense to walk sometimes
@@jakeufford7356 OK. now I understand 👍 Thank you
Great video. What # camouflage stamp is that?
Just a craft tool stamp in the video. Now I use a berry king camouflage. I’m not exactly sure on the number but any will work. Just make sure that it is flat along the one end to make it easier to line up with the edge
What brand of swivel knife are you using
Leather wranglers swivel knife
Can you show how you’d paint the basket weave
It would be the same as my antique video. I have changed my technique a bit so I should be making an updated video in the near future
Bhai ko kaha se ho ta hai is ka
What’s the tool number on your camouflage border stamp please. I have several but none with the straight bottom. Thanks.
It’s a Barry king 7 seed boarder. I’m not sure exactly what size I have though
What size tools?
2 or 3?
How about corner to corner instead of corner to first indent?
Going to the first indent makes it so that the next time you lay it down the corner will fall in line with the last stamp you made if that makes sense
Can you tell me the number thats in your basket weave tool. Please?
I use a Barry king and they don’t have numbers on their tools. I bought it from makers leather supply though. I’d have to double check on what size it is
Why do you put the blue tape under the leather?
It helps to prevent the leather from stretching when you are making the impressions
how can i purchase that tool?
They sell them online, for a cheaper one check out Tandy leather and if you’re wanting to spend a little more for a nicer one check out Barry king
Can I stamp over a stamp
If you want to go back over and re do some of the stamps to get them deeper you could but you don’t want to over lap stamps
If that answers your question
Woah
Hello. May. Friend are your is. Family. Your gad bless you.
Sniff.
Allergy season got me bad
Sniff
@@wilsonmiller1903 sniff