Great instructions!. I bought a Luca seat. The directions were incomprehensible. This video shows the importance of disassembling everything first. Excellent work, Allen.
Thank you so much for this video! The toilet manufacturer's own website wouldn't conveniently provide these instructions. This video enabled be to remove, clean, and reinstall/tighten the seat. Many thanks!!
hi thank u so much ... this was really really helpful as my toilet seat spinning was driving me nuts.. didnt how i wouldve done it without this video.. you're awesome. thanks so much 😁
I have the same type of seat, Winchester I think it's called, which was the search term I used to find your video. I didn't need to install it, but I needed to know how to tighten the 2 placeholders and this video did the trick for me. *thumbs up*
TIP: Insert a thin screw driver down the hole to block the anchor from turning with the screw so that you can tighten it. Using a power drill helps a lot too. Screw it CLOCKWISE to tighten.
Thanks for this nice and clear video. We just bought a house with a toilet that was improperly installed -- the seat was not bolted on before the toiled was bolted down, and the plumber just left it loose. I'm looking for something that is self-bolting and this seat appears to do that. Are all toilet seat mountings the same, or are there different sizes/bolt styles etc?
They are crap mines three months old . Wobbles since day one . Now totally failed. Better Bathrooms were magic and fully refunded me . Croydex lol , just read trustpilot reviews
If you do one thing in your life make sure its this - DO NOT BUY A S(h)IT TIGHT TOILET SEAT unless you like spending hours rolling around on the floor, sweating and swearing. Im not a violent person and am usually pretty laid back but if the person behind this design walked in right now I would bludgeon them to death with my adjustable spanner. Actually the only useful thing in the box was the tool to tighten the nuts, so you actually might not need a spanner depending if the tool fits your old seat. I bought one today from Homebase (they dont even list them on their website even though several designs on the shelf which annoyingly has prevented me writing a review to warn others and tell them to look at a different brand/design) I dont do loads of DIY but wouldnt say I am a novice having fully stripped down and rebuilt a mountain bike in the past, set up all hydraulic brakes, suspension etc, tiled, built flat pack products, set up mouse trap on Christmas day etc etc. The hinges on mine were soft close rectangular cheap chromed plastic in several so called slot together bits which didnt fit together very securely (nothing like whats shown in the video and this is where the main problem lies). Your then left with the task of rolling around on the floor trying to line up two wobbly hinges that wont sit right or flat to the pan due to the stay closed feature, and pop apart. I gave up with their sit tight feature in the end which is basically using a tube of glue and a gasket. Its still Patent pending according to the packaging, good look with that ground breaking idea in the Dragons Den. Still dont believe me how rubbish and frustrating this seat design is, well look at the video they cant even be bothered to check if the toilet pan is clean first before videoing which says it all about the company. If the manufacturer/importer was local rest assured the toilet seat would be getting delivered through their window. All though now installed out of principle I think I will remove and return to Homebase for a refund, and swop for a toilet seat with a simple hinge system and stick some loctite on the threads. I would rather take my ex mother in law to dinner than give it to the bunch of Sh**sters behind these loo seats. Also I cant see the plastic hinges being very longlife.
Wat een eerste klas gepruts, wie gebruikt er nu het deksel als werktafel?? hij laat al een paar keer de sullen uit zijn handen vallen bovenop het deksel.....Krassen gegarandeerd.
This has to be the worst possible toilet seat ever. It is difficult to access, needs constant adjustment, and slides around without warning. Brickbats to the designers and engineers. What were they thinking? I have 3 of these mongrel seats. Do not buy Toto!
To turn ANY Toilet Seat into a ‘Soft Close’ one; just add a bit of shit into the hinges, when you go to the toilet next time.. Stops squeaks too, as the poo acts as a kind of ‘organic lubricant’. Damn! I’m good me, ain’t I..!!? Sometimes, I even surprise myself, with how smart I am!
Thank you for your service to humanity.
Great instructions!. I bought a Luca seat. The directions were incomprehensible. This video shows the importance of disassembling everything first. Excellent work, Allen.
Thank you so much for this video! The toilet manufacturer's own website wouldn't conveniently provide these instructions. This video enabled be to remove, clean, and reinstall/tighten the seat. Many thanks!!
The butterfly mechanism you used to fix to the seat saved my day today as the repair kit fixtures didn't fit in the two holes ... job done
where did you get the fixings from?
Dereton 33 toilet seat
Sir,. u made it much easiee for me to follow and replace our new sryle toilet seat. Thank You
omg, I love you! Thank you. After looking so many different systems I finally found the one I had and could fix my toilet seat.
If I looked down like he did, I’d be fishing my glasses out the bog ! Thanks for excellent vid !
😂😂
hi thank u so much ... this was really really helpful as my toilet seat spinning was driving me nuts.. didnt how i wouldve done it without this video.. you're awesome. thanks so much 😁
I have the same type of seat, Winchester I think it's called, which was the search term I used to find your video. I didn't need to install it, but I needed to know how to tighten the 2 placeholders and this video did the trick for me. *thumbs up*
great - no fuss, no drama no monologue
Just fixed mine on and wouldn't have worked it out without the video. (Instructions combined 2 different fittings. Really pleased. Thank you
To the point no unnecessary talking
Perfect video...just straight down to business! Thanks!
Thanks. Looks good. I'll buy the one I was looking at.
Great video, really easy to follow 😀👍🏼
I’m so excited!! I finally figured out how to remove the seat and cover from your video! Really thank you for uploading this!
Me as well!!! Thanks
This is a perfect "how to" video. Thanks very much.
I struggled with my soft close to install,............... Thanks for the vid 🎉🎈🍾🎂😘
Thanks - your video was very helpful!
Thank you so much! The written instructions literally gave me no clue😭😂😂
Thank You so much for this great video-helped me out of a tough spot.
Thank you was struggling with instructions 👍🏻
Great video, Thanks Allen
Hi, i need to tighten the screws of mine, however i am unable to detach the silver plate cover. Any ideas?
TIP: Insert a thin screw driver down the hole to block the anchor from turning with the screw so that you can tighten it. Using a power drill helps a lot too. Screw it CLOCKWISE to tighten.
Righty tighty, left loosey!!
Benedetto tutorial! mi avete aiutato a capire come si montava la tavoletta. Grazieeee
Excellent service!!
Thanks for the vids. So helpful.
Thanks. Very clear and helpful.
Very good instruction 👍, thanks you very much
I will buy one of this. Thank you
Tnk you so much for solving my problem this it was so helpful. Tnk you from Malta 🇲🇹
Thanks, that helped me!❤
Great what about removng old to replace with new please ..
Thanks for this nice and clear video. We just bought a house with a toilet that was improperly installed -- the seat was not bolted on before the toiled was bolted down, and the plumber just left it loose. I'm looking for something that is self-bolting and this seat appears to do that. Are all toilet seat mountings the same, or are there different sizes/bolt styles etc?
Exelente video thanks sir for that
Where can you buy the seat or the fixings?
I got one bolt in okay but the other is causing me problems as it will not tighten, and don't know how to get it out to start over. Please help?
My rental has a plastic one, time to upgrade.
Thanks a lot man!
Quiet, easy to control with remote.
Very nice video thank you
Mine still wobbles once on.
It’s not the screwed in bits. They are secure . It’s the quick release. Any advice?
They are crap mines three months old . Wobbles since day one . Now totally failed. Better Bathrooms were magic and fully refunded me . Croydex lol , just read trustpilot reviews
Thank you!!!! Better than Bunnings!!
Excelente, es lo que estaba buscando!
It show seat release in straight up position but mine will not release so I can get to the screws to tighten it.. Any suggestions ?
Thank you so much
Magic!!
If you do one thing in your life make sure its this - DO NOT BUY A S(h)IT TIGHT TOILET SEAT unless you like spending hours rolling around on the floor, sweating and swearing. Im not a violent person and am usually pretty laid back but if the person behind this design walked in right now I would bludgeon them to death with my adjustable spanner. Actually the only useful thing in the box was the tool to tighten the nuts, so you actually might not need a spanner depending if the tool fits your old seat.
I bought one today from Homebase (they dont even list them on their website even though several designs on the shelf which annoyingly has prevented me writing a review to warn others and tell them to look at a different brand/design) I dont do loads of DIY but wouldnt say I am a novice having fully stripped down and rebuilt a mountain bike in the past, set up all hydraulic brakes, suspension etc, tiled, built flat pack products, set up mouse trap on Christmas day etc etc.
The hinges on mine were soft close rectangular cheap chromed plastic in several so called slot together bits which didnt fit together very securely (nothing like whats shown in the video and this is where the main problem lies). Your then left with the task of rolling around on the floor trying to line up two wobbly hinges that wont sit right or flat to the pan due to the stay closed feature, and pop apart. I gave up with their sit tight feature in the end which is basically using a tube of glue and a gasket. Its still Patent pending according to the packaging, good look with that ground breaking idea in the Dragons Den. Still dont believe me how rubbish and frustrating this seat design is, well look at the video they cant even be bothered to check if the toilet pan is clean first before videoing which says it all about the company.
If the manufacturer/importer was local rest assured the toilet seat would be getting delivered through their window. All though now installed out of principle I think I will remove and return to Homebase for a refund, and swop for a toilet seat with a simple hinge system and stick some loctite on the threads. I would rather take my ex mother in law to dinner than give it to the bunch of Sh**sters behind these loo seats. Also I cant see the plastic hinges being very longlife.
Seems like you had a shitty experience.
Haha! I echo your sentiments! Sooo frustrating.
THANK YOUUUUUU
Really helpful
Formidable❤
thank you !!!
Can you provide a link for the quick release toilet seat?
What causes the toilet seat to come off?
It played that time. Thank you.
hahah what if i need to make a dump real quick... i cant wait for that thing to get down ;)
Wat een eerste klas gepruts, wie gebruikt er nu het deksel als werktafel?? hij laat al een paar keer de sullen uit zijn handen vallen bovenop het deksel.....Krassen gegarandeerd.
when i removed the old unit, the clamp/washer below the screw got stuck in the hole itself🤨
How many inches between bolts
How I install a wooden toilet seat on this type of toilet
This has to be the worst possible toilet seat ever. It is difficult to access, needs constant adjustment, and slides around without warning. Brickbats to the designers and engineers. What were they thinking? I have 3 of these mongrel seats. Do not buy Toto!
Annie Heydon u r exactly right I have one and they r the worst seats ever
the mans replacing a toilet seat and dressed like alan sugar
Kuch samaj m Nai aya
Someone is gonna steal the toilet seat
这种厕所盖怎么拆除呢？
They still move.
Πως θα το παραγγείλω .?
I woulda thought the part at 1.05 would hace gone on the top, not the bottom
The toilet seat over hung the edge of the toilet bowl at the front. You did not adjust to give a proper fit.
Take my money.
Don't get one or allow a builder to put one in absolute crap!
Bizarre how the seat is simpy connected on top of it
Can you translate this video to French ? Gracias.
This video doesn't play for me. It's freezes
+Rogena Styles
This is not a problem with RUclips; nonetheless, you can download it and play it with Media Player Classic.
No seating around
interesting at min : 3:39
Did someone shit in that bog ? Skid marks
5)
NEVER use a driver to tighten up bolts/screws. Chances are very high that you will over tighten and crack the porcelain. Always tighten by hand.
Why are you rushing the job? End up with scratches on seat top when you drop stuff on it.
Should not have placed fittings on seat to begin with.
he didn't rush anything, what do you want a tour of the toilet and him hugging it before he works on it
69theworld hahahhahahha
@@69theworld
😂
Not straight!
Dont buy these garbage seats. If you cant press the release buttons the seat remains stuck .
To turn ANY Toilet Seat into a ‘Soft Close’ one; just add a bit of shit into the hinges, when you go to the toilet next time..
Stops squeaks too, as the poo acts as a kind of ‘organic lubricant’.
Damn! I’m good me, ain’t I..!!?
Sometimes, I even surprise myself, with how smart I am!
Thanks