Would 2 of these extend the range of the Wifi signal from my 2 Sungold Power SP6548 Inverters? My home mesh sistem picks it up but somtimes only one shows up. I have tried with both SmartESS & WatchPower but both are speratic. The system is in the garage about 45 meters from my starlink modem. How far (if they will work with my inverters) will they extend the range of their out put?
If i'm going to buy POW-HVM8.2M inverter and RS232 wi-fi module, will i be able to configure notifications in the app when my power grid shuts down and power is taken from a battery? It is shown in the video that i can configure some notifications, but not shown what notifications i can choose.
Hi, I have added to the data logger to the SmartESS account but it shows as offline. Any reason for it. All four indicators on the data logger are light continuously.
Hi, I have 2 inverters connected in parallel for single phase output 240vac. Do I need 2 Wi-Fi dataloggers or cash i connect inverters with rs485 cable?
Hi, if you want to monitor the data of each inverter, each inverter needs to be equipped with a WiFi module. If you just want to set parameters through the WiFi module, you only need to install the WiFi module on the host. The slave follows the host's settings and wants to monitor Which machine can be installed on which machine.
I have a question about the power consumption monitoring. I am looking to purchase 2 to 3 of these units and run them to a single load center that is connected to a small cabin in a remote land I own. Ideally, I just want to open the the app and see what power I'm generating and what I'm consuming. With the wifi, will I have to look at each unit one by one or does it have a summary of all the units connected? I would prefer not to go unit by unit and do math to figure out total power consumption. Is there a way to achieve this?
Do I need 1 or 2 WiFi modules for this setup of (2) 5 kw inverter in split phase 240 volt. I already ordered 2 inverters with 2 WiFi modules because the sales person told me, I need 1 WiFi module for each inverter.
Hi. I have 3x 6,2kw hybrid inverter hvm6.2k and your battery powmr 200ah connected with rs485. I can connect WiFi on rs232? My inverter have only one rs485 and one rs232. Thank you.
Hi. I have powmr inverter POW-HVM6.2M-48V. As well as wifi Plug Pro-05. Is it possible, using this Wi-Fi module, to receive automatic notifications on your smartphone when the power supply from the network switches to battery power? If I make this switch, will I receive a notification about this on my iPhone or not?
Greetings, how can we set the hybrid inverter at what time to charge, I think during the winter to charge it when the electricity is cheaper, or at night
I have a LVM3K0-24-H inverter with a WIFI-HF Monitor, I cannoy seem to get the "com" light to come on. I have restarted the inverter and that did not help.
I have the Data logger connected to the internet and cloud, at least that says the self test. But no matter how long I wait, even half a day at the moment, it will not appear in the smart ess app. What am I doing wrong?
@@OluwatosinAdenuga actually never wrote a Mail I guess. Problem with my system was that if the inverter is set to li ion It tried to use the com Port for communication with a battery instead of the data logger. So I switched to user as a battery setting and adjusted it to fit with my batteries and everything worked fine .
I have 2 wifi modules. 1 of the WiFi module reset PV power generator on the day around 2pm. How do I fix it to reset at midnight. The other module works fine.
Nope, if only the power light is on, it means that the WIFI module is successfully powered on. All four lights need to be on to mean that the WIFI module is successfully connected. The WIFI module needs to be successfully configured with the 2G router before it can be used.
When can we turn on and off the grid tie from the app? The hybrid mode that send power to grid. And the real time data is not realtime. It's every 5 minutes. Is there a way to make it like every 30 second?
@@PowmrSolar PowMr 6200W 48V Hybrid Solar Inverter Charger MPPT 140A Pure Sine Wave Controlle This from ebay australia. I think POW-HVM6.2M-48V-N. I am really looking forward to turn on and off the hybrid mode that send power to grid from the app.
Hi, i have one wifi module since march 2023 and suddenly stopped working 2 weeks ago, only turns on the first 2 leds, the net and svr led never comes on again, i tried reset and star again, the net led turns on when i use the wifi network of module and it show configuration succecfully of wifi, but after go bakc to home wifi the led turns off again, so the problem is that the module can't connect to home wifi, i tried even phone data plan with no luck may you give me some support please?
Kindly check the product link below: powmr.com/products/owmr-wifi-module-with-rs232-remote-monitoring-solution-pow-module-wifi?pr_prod_strat=pinned&pr_rec_id=bae8fb114&pr_rec_pid=8324203938087&pr_ref_pid=9054460739879&pr_seq=uniform
@@PowmrSolar I've got the proper wifi module for this invertor, but no lights are on when connected to the invertor. Can it be the problem with communication module inside the invertor? I've successfully connected JK bms based battery to the invertor, but cannot do anything with wifi.
@@sergeylappo9448 Hi, all the lights need to be on to indicate that the WIFI module is successfully connected. The WIFI module needs to be successfully configured with the 2G router before it can be used.
HI, I are using 4x5Kw hybrid inverters with parallel connetion (120/240 Vots) total=20 Kwp. How many Wi-Fi Modules Do I need to check all consumption?, I nedd check the total energy (Sun, Batteries and Utility), Can I use only one WiFi module unit?, if it is possible, how can check all inverters
Hi, you need 4 Wi-Fi modules. If you want to monitor the data of each inverter, each inverter needs to be equipped with a WiFi module. If you just want to set parameters through the WiFi module, you only need to install the WiFi module on the host. The slave follows the host's settings and wants to monitor Which machine can be installed on which machine.
Hello, buy it's POW-SUNSMART SP5K It is compatible with this model? What if you can see the production of the panels and the consumption of the investor in real time from anywhere in the world?
Hi, kindly send your problem to this email: support@powmr.com. Please note that we may not be able to promptly respond to you due to the Lunar New Year. We apologize for the inconvenience this may take and thank you for your understanding. We wish you all the best!
Hi. I have 24v 3.5 kw MPS VPLUS series inverter. I have connected wifi module and was accessing inverter remotely (inverter in india, Iam in dubai). Now in India wifi router has been changed. My app shows offline. How to restore remote connection by connecting inverter wifi module with new wifi router while me and my mobile in Dubai???
Please send a clear frontal photo of the WIFI module and the inverter product label to this email address: support@powmr.com. Our technical staff will assist you.
Hello, when I am already synchronizing with the Datalogger after configuring the wifi it tells me: Curren The datalogger already exists and can Ro(E) not be added repeatedly
All the lights need to be on to indicate that the WIFI module is successfully connected. The WIFI module needs to be successfully configured with the 2G router before it can be used.
Hi, please send your problems to this email: support@powmr.com. Please note that we may not be able to promptly respond to you due to the Lunar New Year. We apologize for the inconvenience this may take and thank you for your understanding. We wish you all the best!
Po neúspěšném propojování WiFi-HF modulu s powmr 6200w 48v hybrid solar inverter se měnič vypnul a nejde zapnout. Jak to opravit? After unsuccessfully connecting the WiFi-HF module with the powmr 6200w 48v hybrid solar inverter, the inverter turned off and cannot be turned on. How to fix it?
@@PowmrSolar Děkuji. Moc se omlouvám, ale špatně jsem napsal označení modulu! Zároveň s objednaným invertorem (POW-HVM6.2M-48V) mi byl zaslán modul Wi-Fi Plug Pro-05(PN: Q3721081462303) Thank you. I'm very sorry, but I misspelled the module label! At the same time as the ordered inverter (POW-HVM6.2M-48V) I was sent the Wi-Fi Plug Pro-05 module (PN: Q3721081462303)
@@PowmrSolar Připojil jsem baterii, zapnul invertor a on funguje. Záhada! Nerestartoval jsem ho! Pět dní nefungoval. Při zapnutí naskočil a během sekundy vypnul. Wi-Fi nepřipojeno (asi počkám na odborníka🤔) Děkuji I connected the battery, turned on the inverter and it works. Mystery! I didn't restart it! It didn't work for five days. It jumped when turned on and turned off within a second. Wi-Fi not connected (I guess I'll wait for an expert🤔) Thank you
I used a Samsung phone as a hotspot but anytime I tried to connect, I kept getting network too low. could it be from the hotspot or what? please help out
The default password of the PN number network of the WIFI module cannot be modified. The password for the APP is the password you set when you registered your account.
Hi, this model(POW-HVM3.2H-24V), right? WIFI-VM. The product link for your checking as below: powmr.com/products/powmr-wifi-module-with-rs232-remote-monitoring-solution-wifi-vm
Would 2 of these extend the range of the Wifi signal from my 2 Sungold Power SP6548 Inverters? My home mesh sistem picks it up but somtimes only one shows up. I have tried with both SmartESS & WatchPower but both are speratic. The system is in the garage about 45 meters from my starlink modem. How far (if they will work with my inverters) will they extend the range of their out put?
Hi, please send your problems to this email: support@powmr.com.
Hi
The dongle shows me the inverter but offline, I press on the icon and it doesn't work
Mesma coisa aqui
Thanks to your directions I succesfully restarted my connection.
If i'm going to buy POW-HVM8.2M inverter and RS232 wi-fi module, will i be able to configure notifications in the app when my power grid shuts down and power is taken from a battery? It is shown in the video that i can configure some notifications, but not shown what notifications i can choose.
same opinion
Hi, the wi-fi module for POW-HVM8.2M is WIFI-VM. Yes, there will be a warning.
Hi, I have added to the data logger to the SmartESS account but it shows as offline. Any reason for it. All four indicators on the data logger are light continuously.
Hi, please send your problem to this email: support@powmr.com
Hi, I have 2 inverters connected in parallel for single phase output 240vac. Do I need 2 Wi-Fi dataloggers or cash i connect inverters with rs485 cable?
Hi, if you want to monitor the data of each inverter, each inverter needs to be equipped with a WiFi module. If you just want to set parameters through the WiFi module, you only need to install the WiFi module on the host. The slave follows the host's settings and wants to monitor Which machine can be installed on which machine.
I have a question about the power consumption monitoring. I am looking to purchase 2 to 3 of these units and run them to a single load center that is connected to a small cabin in a remote land I own. Ideally, I just want to open the the app and see what power I'm generating and what I'm consuming. With the wifi, will I have to look at each unit one by one or does it have a summary of all the units connected? I would prefer not to go unit by unit and do math to figure out total power consumption. Is there a way to achieve this?
Hi, please send your problem to this email: support@powmr.com
Hello! Can I grant access to PowerMr inverter monitoring to a second account or via the web interface? I use SmartESS app for iOs
Yes, one can log in to the mobile APP and the other can monitor on the web page.
www.dessmonitor.com/#/entry
Do I need 1 or 2 WiFi modules for this setup of (2) 5 kw inverter in split phase 240 volt. I already ordered 2 inverters with 2 WiFi modules because the sales person told me, I need 1 WiFi module for each inverter.
Hi, this model? (POW-SUNSMART SP5K)
@@PowmrSolar Yes
@@MakeItAdmirable If you want to monitor the data of two devices, you need two WIFI modules.
@@PowmrSolar ok thank you
Hi. I have 3x 6,2kw hybrid inverter hvm6.2k and your battery powmr 200ah connected with rs485. I can connect WiFi on rs232? My inverter have only one rs485 and one rs232. Thank you.
Yes, you can connect WIFI on RS232.
Hi. I have powmr inverter POW-HVM6.2M-48V. As well as wifi Plug Pro-05. Is it possible, using this Wi-Fi module, to receive automatic notifications on your smartphone when the power supply from the network switches to battery power? If I make this switch, will I receive a notification about this on my iPhone or not?
Hi, the smartphone will not receive notifications.
Greetings, how can we set the hybrid inverter at what time to charge, I think during the winter to charge it when the electricity is cheaper, or at night
May I know which model?
I have a LVM3K0-24-H inverter with a WIFI-HF Monitor, I cannoy seem to get the "com" light to come on. I have restarted the inverter and that did not help.
Hi, kindly send your problems to this email: support@powmr.com
hi, I purchased a pow mr 6.2kw, where can I find a tutorial on the connections? thanks
Hi, please refer to the 4.2 model
ruclips.net/video/pu7YlYKtRG8/видео.html
Hello, the wireless modules is connected to the RS-485 1 port. What is the RS-485 2 is used for? Thanks
Port 1 is connected to the wireless communication module, and port 2 is connected to BMS communication.
I have the Data logger connected to the internet and cloud, at least that says the self test. But no matter how long I wait, even half a day at the moment, it will not appear in the smart ess app. What am I doing wrong?
Please send your problem to this email: support@powmr.com. Our technical staff will handle it for you.
di they fix this for you?
@@OluwatosinAdenuga actually never wrote a Mail I guess. Problem with my system was that if the inverter is set to li ion It tried to use the com Port for communication with a battery instead of the data logger. So I switched to user as a battery setting and adjusted it to fit with my batteries and everything worked fine .
Thanks. How can i set up notifications every time the equipment is in inverter mode.?.
Hi, please send your question to this email: support@powmr.com.
I have one inverter connection to the software trying to get 2nd inverter on the software. Do they both need to be on the same network?
Hi, which model?
Hi!
i have PowMR 4.5kw, app installed and logger shows, but inverter do not shows in app (about 20hr ago installed), why this not works??
Hi, please send your problem to this email: support@powmr.com.
@@PowmrSolar What should I write to Datalogger alias because I don't understand, I searched and didn't find anything
вы решили свою проблему? напишите пожалуйста что делали? у меня тоэже даталогер в сети, онлайн, но инвертор не выводиться в приложение
I have 2 wifi modules. 1 of the WiFi module reset PV power generator on the day around 2pm. How do I fix it to reset at midnight. The other module works fine.
Hi, kindly send your problems to this email: support@powmr.com
can i use it for Felicity Battery or is it just for Inverters ?
for the inverters.
I have Fronus Pv 7200 inverter. The datalogger is successfully connected to wifi but no device is shown in ess smat app.
Please assist
Please send your problem to this email: support@powmr.com.
Is there a website that this info can be accessed or is it mobile only?
app only
What if I only have the power light on?
Is it possible to direct connect using Wi-Fi and monitor locally?
Nope, if only the power light is on, it means that the WIFI module is successfully powered on. All four lights need to be on to mean that the WIFI module is successfully connected. The WIFI module needs to be successfully configured with the 2G router before it can be used.
When can we turn on and off the grid tie from the app? The hybrid mode that send power to grid.
And the real time data is not realtime. It's every 5 minutes. Is there a way to make it like every 30 second?
Yes, it's every 5 minutes. We can't make it every 30 second. May I know the inverter model number you use?
@@PowmrSolar PowMr 6200W 48V Hybrid Solar Inverter Charger MPPT 140A Pure Sine Wave Controlle
This from ebay australia. I think POW-HVM6.2M-48V-N.
I am really looking forward to turn on and off the hybrid mode that send power to grid from the app.
@@rowanddownunder HI, can only be set in the inverter.
@@PowmrSolar if i turn on grid tied. Why the mode became sub. I have been trying to change it to sbu but its going back to sub.
is there a web site address instead of the QR code to access from PC?
www.dessmonitor.com/#/entry
Can I use my router bridge mode as a substitute to Wi-Fi module
Nope.
Hi, i have one wifi module since march 2023 and suddenly stopped working 2 weeks ago, only turns on the first 2 leds, the net and svr led never comes on again, i tried reset and star again, the net led turns on when i use the wifi network of module and it show configuration succecfully of wifi, but after go bakc to home wifi the led turns off again, so the problem is that the module can't connect to home wifi, i tried even phone data plan with no luck may you give me some support please?
Hi, kindly send your problems to this email: support.
Same here . Has this been resolved on others?
Can this be used to monitor the inverter from another location?
Yep.
Hi. What WiFi module should I use for POW-HVM6.2K-PRO? i have one that came with 3.2KWt version and for 4.5kWt.
Kindly check the product link below:
powmr.com/products/owmr-wifi-module-with-rs232-remote-monitoring-solution-pow-module-wifi?pr_prod_strat=pinned&pr_rec_id=bae8fb114&pr_rec_pid=8324203938087&pr_ref_pid=9054460739879&pr_seq=uniform
@@PowmrSolar I've got the proper wifi module for this invertor, but no lights are on when connected to the invertor. Can it be the problem with communication module inside the invertor? I've successfully connected JK bms based battery to the invertor, but cannot do anything with wifi.
@@sergeylappo9448 Hi, all the lights need to be on to indicate that the WIFI module is successfully connected. The WIFI module needs to be successfully configured with the 2G router before it can be used.
Which software version? Because i see smartESS and smartClient and both i have trouble setting up wlan data
How do I connect directly to the dongle to configure a static IP?
Currently, there is no such function. You can only use the WIFI module by connecting it to a 2.4G router network or a 4G mobile phone hotspot.
Does Powmr inverter 24v 4.5kw have wifi data monitoring function?
Yes, but the WIFI of this model is still being upgraded.
Is it available now…wifi module for Pow-HVM4.5K-24v ….?
I there I just received the wifi plug and I conected as you show in the video but is not working, I need help
Please send your problems to this email: support@powmr.com
HI, I are using 4x5Kw hybrid inverters with parallel connetion (120/240 Vots) total=20 Kwp. How many Wi-Fi Modules Do I need to check all consumption?, I nedd check the total energy (Sun, Batteries and Utility), Can I use only one WiFi module unit?, if it is possible, how can check all inverters
Hi, you need 4 Wi-Fi modules. If you want to monitor the data of each inverter, each inverter needs to be equipped with a WiFi module. If you just want to set parameters through the WiFi module, you only need to install the WiFi module on the host. The slave follows the host's settings and wants to monitor Which machine can be installed on which machine.
Hello, buy it's POW-SUNSMART SP5K
It is compatible with this model?
What if you can see the production of the panels and the consumption of the investor in real time from anywhere in the world?
Yes, it’s this WIFI module.
Wie kann ich einen weiteren w-lan dadapter einfügen? Die Adapter sind online weden aber nicht mit den wechselrichter angezeigt
Please send your problem to this email: support@powmr.com.
Can we turn off the inverter supply to house with wifi through mobile device??
Hi, can't yet.
I have a question . The Module is fully connected . But seems there is nothing regonized . Why ?
Hi, kindly send your problem to this email: support@powmr.com. Please note that we may not be able to promptly respond to you due to the Lunar New Year. We apologize for the inconvenience this may take and thank you for your understanding. We wish you all the best!
Powmr inverter could be monitored remotely?
Yep.
Hi. I have 24v 3.5 kw MPS VPLUS series inverter. I have connected wifi module and was accessing inverter remotely (inverter in india, Iam in dubai). Now in India wifi router has been changed. My app shows offline. How to restore remote connection by connecting inverter wifi module with new wifi router while me and my mobile in Dubai???
Hi, please send your question to this email: support@powmr.com. Our technical staff will handle it for you.
Hi, i have 6 inverters setup in 3phase system. how can monitor the complete system? my model is pow-sunsmart-SP5K
Hi, do you want to monitor the specific data of each machine?
Which wifi plug can be used with POW-SUNSMART 5.6KW inverter?
WIFI-HF
How do I reset the WIFI module settings if the router has changed?
Please send a clear frontal photo of the WIFI module and the inverter product label to this email address: support@powmr.com. Our technical staff will assist you.
On the 10th attempt I managed to enter the WiFi module settings.
Where can I buy this module??
Hi, kindly check the product link: powmr.com/products/powmr-wifi-module-wifi-hf-plug07
Hello, when I am already synchronizing with the Datalogger after configuring the wifi it tells me: Curren The datalogger already exists and can Ro(E)
not be added repeatedly
May I know which model?
Wifi data logger doesn’t see inverter. 3 lights are on, but not COM. All connections are correct, firmly connected. What is the problem?
All the lights need to be on to indicate that the WIFI module is successfully connected. The WIFI module needs to be successfully configured with the 2G router before it can be used.
@ thank you Captain Obvious. It is connected correct way. But it doesn’t communicate with inverter.
@@crphoto Can you record a video for us to check?
Does it work with POWLAND 3,5kW?
POWLAND 3,5kW? Please send us the model number.
if was working fine for about a year and now my com light is off anyway to fix it.
Please send more details to this email: support@powmr.com. Our technical staff will check it for you.
Hi.
since yesterday my application hangs and does not refresh data, what can I do?
Hi, please send your problems to this email: support@powmr.com. Please note that we may not be able to promptly respond to you due to the Lunar New Year. We apologize for the inconvenience this may take and thank you for your understanding. We wish you all the best!
the topic is not current, everything works again@@PowmrSolar
What should I write to Datalogger alias because I don't understand, I searched and didn't find anything
Hi, are you referring to the PN number or the device name?
I put PN but I think I should also write Datalogger alias, and I don't understand what I have to write
What username should I write because it shows me inactive
@@sinicaionela1936 Kindly send your questions to this email: support@powmr.com. For faster help, please record a video.
My data logger SRV LED is going off and device is offline. How can I solve this issue?
The device is offline and you need to check whether the WIFI module is successfully configured. Need to connect to 2.4G router network.
I have wifi relab, but in only shows voltages of PV, Input, output, and battery. Why its not showing active load, PV power etc.??
In device type, it's showing energy storage, instead of hybrid inverter. I owned a Pow Relab 5KE with Wifi Relab.
@@jervyllagas2829 Please send your problem to this email: support@powmr.com.
Po neúspěšném propojování WiFi-HF modulu s powmr 6200w 48v hybrid solar inverter se měnič vypnul a nejde zapnout. Jak to opravit?
After unsuccessfully connecting the WiFi-HF module with the powmr 6200w 48v hybrid solar inverter, the inverter turned off and cannot be turned on. How to fix it?
Hi, The WIFI module of this model(POW-HVM6.2M-48V) is WIFI-VM
@@PowmrSolar Děkuji. Moc se omlouvám, ale špatně jsem napsal označení modulu! Zároveň s objednaným invertorem (POW-HVM6.2M-48V) mi byl zaslán modul Wi-Fi Plug Pro-05(PN: Q3721081462303)
Thank you. I'm very sorry, but I misspelled the module label! At the same time as the ordered inverter (POW-HVM6.2M-48V) I was sent the Wi-Fi Plug Pro-05 module (PN: Q3721081462303)
@@pacholekjosef Only connect the battery(disconnect other connections), and see if you can restart the inverter.
@@PowmrSolar Připojil jsem baterii, zapnul invertor a on funguje. Záhada! Nerestartoval jsem ho! Pět dní nefungoval. Při zapnutí naskočil a během sekundy vypnul. Wi-Fi nepřipojeno (asi počkám na odborníka🤔) Děkuji
I connected the battery, turned on the inverter and it works. Mystery! I didn't restart it! It didn't work for five days. It jumped when turned on and turned off within a second. Wi-Fi not connected (I guess I'll wait for an expert🤔) Thank you
Buenos días, tengo un módulo wifi de esta marca, pero no me funciona en un inversor de otra marca. Favor su ayuda para hacer que funcione. Gracias.
I used a Samsung phone as a hotspot but anytime I tried to connect, I kept getting network too low. could it be from the hotspot or what? please help out
Hi, kindly send your problems to this email: support@powmr.com
when i want to do my data logger id it says your id already exists now what can i do please give a solution...
Hi, kindly send your problems to this email: support@powmr.com
Como integrar ele no Home Assistant?
The APP is SmartESS.
Can get about 4.5kW inverter wifi module ,
Hi, kindly check the product link: powmr.com/products/powmr-wifi-module-wifi-4-5k-6-5k
@@PowmrSolar on that module , not log data only can see that a movement , is there any configuration on it
Why does my WiFi module not work… I followed the instructions and in the app the “basic parameter” section, the “Datalogger status” says it’s offline…
Probably not connected to the network. Please disconnect, delete WiFi and try again following the operation video.
SmartESS multiplies my devices and shows me two active devices at the moment even though I only have one, why ?
Hello, please send your problem to this email: support@powmr.com.
Suddenly stopped working after 30 days . It says network anomaly. App not responding. It’s not my network.
Please advise
Kindly send your problems and model number to this email: support@powmr.com
My device was in online status but it is in offline status and I can’t understand what has happened. Nothing was changed.
Hi, please send it to this email: support@powmr.com. Our technical staff will check it for you.
hi,
i followed your instruction but still showing 0 device
i tired many times and no way
Please send your problem to this email: support@powmr.com.
Não funciona. Quando vou colocar o endereço diz: "endereço já existe". Não dá continuidade. Inversor híbrido 3.2kw
Kindly send your problems to this email: support@powmr.com
How to change default password after configuring wifi module?
The default password of the PN number network of the WIFI module cannot be modified. The password for the APP is the password you set when you registered your account.
Datalogger already exist. In account there Is not any
Why does the wifi say connected without internet
To connect the WIFI module to the 2.4G router network.
@@PowmrSolar with an inverter the wifi name it's says no connected without internet
With my HYBRID SOLAR INVERTER RG-MH5500W
@@tsiontsegaye4499 RG-MH5500W?
I have problem : wifi module already exists
Please contact this email address: support@powmr.com to cancel the existing account
My battery level in the app is always 100% which is not the case in reality
Please send your problem to this email: support@powmr.com.
datalogger does appear but device does not
Hi, which model?
I have the same problem. My model is POW-HV6 2M-48V-N. Can you help me?
как вы решили свою проблему? инвертор появился в приложении? что вы делали?
@@maikolino1994 вы решили свою проблему?
she so cute, omg
like
😬 Promo SM
Your product is good but your video is very bad I don't understand anything please explain in details 😡
Kindly send your problems to this email: support@powmr.com.
hello....I have a SUMRY hybrid inverter and I can connect it but without monitoring the data, how do I solve it?
HI, please send your problem to this email: support@powmr.com.
Does the powmr 3.2kw 24v inverter has wifi function for collect the inverter's data from mobile?
Hi, this model(POW-HVM3.2H-24V), right? WIFI-VM. The product link for your checking as below: powmr.com/products/powmr-wifi-module-with-rs232-remote-monitoring-solution-wifi-vm
I cannot connect to my wifi module always rebooting,plz help what shall I do
Please send your problem to this email: support@powmr.com. Our technical staff will handle it for you.