Hello..It should be the same..what changes is if you have a rear door open with foot sensor....sensor has to be repositioned a bit.. that's all I'm aware that's different...hope this helps...👍
I would guess 1-2 because of where you have to cut the OEM one in . mine doesn't have any rubbing or clearance problems but the OEM would be even higher
this is a very nice install job. clean and tidy. To be fair to the $1500 quote from your Toyota dealer, that would include the towing wiring harness (for trailer lights and brakes), and the OEM hitch the dealer would install sits a bit higher in the bumper. the benefit of the OEM hitch is that it doesn't reduce the departure angle of the rear bumper (meaning the hitch won't scrape on the ground when off-roading), but the install does require removal of the rear bumper and maybe some other body panels. It's a ton more work. The hitch install of this video is a nice compromise. Barely hangs down at all, and MUCH easier to install (but no electrical wiring connections, so not for towing a trailer with lights and brakes).
Is the plastic piece you cut for the hitch to pop out is that whole plastic Piece One Piece or is it connected to the bumper is it part of the bumper or is it one big long piece of plastic that you cut out the chunk of please let me know thank you great job
Hi...it's just a small piece off the actual bumper.. check the install video slowly..I explain the size and how to there..tks for supporting the channel likes 👍 and subs tks.any other ? Please post..tks
Thank you thank you thank you so much for making this video. It’s very well done and it’s helped me out so much as to what to buy.
Nice... thank you...I'm glad I could help.. don't forget to 👍like the videos an subscribe..its like my report card with RUclips tks.👍👍
Very helpful video, im going to order one of these for my 2023 Rav4H. Thanks
Thank you..you will not regret it..and great car buy the way..
where did you order from (I can't find a Canadian supplier)
Awesome video thanks for sharing
👍
Easy enough!! Thanks!!👍
Thank you..I try to make it as simple as it is..👍
Do you happen to know if this is the same install instructions for the 22 rav4 prime?
Hello..It should be the same..what changes is if you have a rear door open with foot sensor....sensor has to be repositioned a bit.. that's all I'm aware that's different...hope this helps...👍
It looks like the factory tow bracket to the right of the hitch was not on your vehicle but if you have one, it would need to be removed.
Thank you for you observations
So the height you have how much higher would oem would be from your ecohitch
Have 24 hybrid rav4 xle
I would guess 1-2 because of where you have to cut the OEM one in . mine doesn't have any rubbing or clearance problems but the OEM would be even higher
Think it could be done without a lift?
Yes..for sure..not to hard...follow the video pause it when need to will help...👍
And don't forget to like 👍and subscribe..it helps me out..tks
Toyota gave me a quote of $1500 🙀
Wow.. that's a lot...I'm glad I could help..
this is a very nice install job. clean and tidy. To be fair to the $1500 quote from your Toyota dealer, that would include the towing wiring harness (for trailer lights and brakes), and the OEM hitch the dealer would install sits a bit higher in the bumper. the benefit of the OEM hitch is that it doesn't reduce the departure angle of the rear bumper (meaning the hitch won't scrape on the ground when off-roading), but the install does require removal of the rear bumper and maybe some other body panels. It's a ton more work. The hitch install of this video is a nice compromise. Barely hangs down at all, and MUCH easier to install (but no electrical wiring connections, so not for towing a trailer with lights and brakes).
@@conradchevalier thank you...I also have a video of the full wiring on my channel..tks again
Why not turn the phone sideways?
Thank you for your advice..
Is the plastic piece you cut for the hitch to pop out is that whole plastic Piece One Piece or is it connected to the bumper is it part of the bumper or is it one big long piece of plastic that you cut out the chunk of please let me know thank you great job
Hi...it's just a small piece off the actual bumper.. check the install video slowly..I explain the size and how to there..tks for supporting the channel likes 👍 and subs tks.any other ? Please post..tks
Guess the profile view was meant for TikTok viewing.
Where did you buy this hitch? Do you have the item number?
The hitch is called ecohitch # X7396 2" ...I don't remember where I bought it ...hope this helps.👍
How much did it cost
Around $350
Why is it listed as 2023 when you say it’s a 2022
,2020,2021,2022 and 23 are same install...
@@samiboost404 Awesome, thanks!
What is the hitch part # anyone know? Having a hard time finding it for my2023. 2” receiver