You must be the luckiest guy in the world to fix this problem by doing what you did. Inside the clip is burned, you can sand inside the clip with a 500 grit sandpaper but if it's burned too much it will not work. I tried this with my Epson et-2750 but I'm still getting the same error and I cleaned everything real good with alcohol and all contacts are perfect. My ribbon cable looked exactly like yours. I probably have a blown fuse but I don't think it's worth fixing this
I love your videos. I have this printer and this error, I am going to have to figure it, but this video is definitely helpful, all your videos are and so is your website for codes ❤
Hey guys, I found solutions working is video, thanks. Me sirvió la solución de F130 El la placa lógica, muy diminuto el fusible y no se logra ver exactamente cual es pero la experiencia hace lo suyo, gracias man.
hola amigo una pregunta .remplasaste el f130 de la placa y eso te soluciono el problema?? por que yo tambien tengo el mismo problema con una impresora epson l4160 que muestra el mismo error ya he descartado todo y el error apunta a placa
Hi Kevin I can’t seem to find the video of how you test the tint f301 fuse on the motherboard of the Epson ET-2720. Also how to check and remove the print head. Any help appreciated. Many thanks, Darren
Hello I had that error. And cleaned the ribbon cable and the error is gone but the printer only prints blank pages. I replaced the headprint and it stills printing blank pages. I orderd from your website the ribbon cable and see if it fixes it. if I don't have the error anymore and it stills print blank pages, what else could it be?
Hello friend. I got this error aswell as the 031008 on my wf 7710 after a manual head flush from your other video, i let it sit over night and the next day it turned on fine but now it prints blanks after plenty of head cleanings and nozzle checks. Do you kno what this means? Would really appreciate a response, thanks!
I removed printer head and was cleaning it with water and then with specialy dedicated cleaning solution CLEANSER INK STRONG. Now I have Error E-01 after printer start. Can such water or cleaner solution made short inside the printer head PCB, too ? I am convinced that if you clean printer head PCB and then dry it before installation, then nothing should happen to this PCB and motherboard too, and you can use this printer head again. Only problem is - in my opinion - HOW TO CLEAN printer head PCB connector contacts, because after cleaning it with water or cleaner solution, residues or oxidation can stay on the contacts surface, which prevent good conductive connection. What do you think about : - using of cleaned-up and dried Printer head : - oxidation after cleaning of Printer head contacts surface ? Thank you very much in advance for you opinion.
The solution utilized for cleaning is alcohol-based. Allowing your printer to air dry naturally for a period of 2-5 days (The longer the better) after the cleaning of the printhead should have no enduring impact. By "naturally," I mean leaving the printer undisturbed on your table without turning it on.
Hi Kevin, brilliant videos, you have advised me in the past, ref epson wf-7720, I have now replaced print head and the print head data cable, due to burnt flat cable and burnt out print head, however I still get error code 031006, this video hints it could be mother (main) board, are you able to confirm this??, I understand there's a fuse on this board for the print head, is this an easy repair, or is it simpler to throw the board away and replace with new one, thanks in advance.
@@BCHTechnologies yes, I was able to figure it out . But my printer won’t turn on now. After pressing the On button the blue light by the power but turns on real quick with orange light on the error light. after replacing the print head and print head cables. My printer is not turning on. Have you ever ran into this problem ? Any advise? I’ve check that I put everything back to get her checked it 4 times.
I changed my print head and still get epson error code 031006, I don't know what else to do any help would be greatly appreciated, this all happened after I tried to unclog cartridges I thought I got to much cleaner and blowed my head so I charged it , but didn't work
I would like to send you a printer. What do I do? I tried to fix it and I put in a new printer head but it's still not working. I'll send you everything
Why dont Epson seal their print head connector so ink does not short out the print head and cause damage also to the mother board....i like Epson but this problem is preventable and should never happen !!!!!!!
Do you by any chance know how to fix a Epson Surecolor S80600? I'm getting an error code 1a39 and I don't want to replace my printhead.. again. This printer has 2 printheads so it's quite expensive. The manual keeps telling me it's an error code with one or both printheads but I think it's something else. I literally replaced one of the printheads three months ago and it's really uncommon for this error code to pop up again. Please give me any suggestions you may have. I'd appreciate it.
hi. I have a epson c5790 printer. My printer does not print magenta. I'm doing head cleaning, magenta color is coming. Head is intact. but after some printing, the red color still does not come on. I inserted a solid cartridge problem persists again. please help me. thanks. prints yellow instead of red constantly. I have done eeprom reset. I updated the software problem continues.
Hello I had that error. And cleaned the ribbon cable and the error is gone but the printer only prints blank pages. I replaced the headprint and it stills printing blank pages. I orderd from your website the ribbon cable and see if it fixes it. if I don't have the error anymore and it stills print blank pages, what else could it be?
You must be the luckiest guy in the world to fix this problem by doing what you did. Inside the clip is burned, you can sand inside the clip with a 500 grit sandpaper but if it's burned too much it will not work. I tried this with my Epson et-2750 but I'm still getting the same error and I cleaned everything real good with alcohol and all contacts are perfect. My ribbon cable looked exactly like yours. I probably have a blown fuse but I don't think it's worth fixing this
I love your videos. I have this printer and this error, I am going to have to figure it, but this video is definitely helpful, all your videos are and so is your website for codes ❤
Good idea to repair cable xp440. Hope idea to check F1 also work 🙂
Can the fuse be burnt and have no error message? DO I still have hope?
I also checked continuity on each pin and it has good continuity.
This Fuse 500mA 32V smd 0603 is 100% suitable, I changed it on my ET 4750
can you please show how you removed the printhead cable? I have the ET 2750 and it looks complicated, would appreciate knowing how to do this.
print head Jesus...so intresting...I now have a new slogan for my clients😁😁
You are very smart
great videos! wondering if you can help get to the
mainboard of an epson xp-15000?
Same
Kevin is there a way you have a video how to part the printer I have a 15000
Thanks from Russia
Suddenly it shutdown my friend on the last part of your video. 😅😅
You are a genius!
"print head jesus" 🤣
omg i laughed so hard
Easy peasy. Thanks!
Hey guys, I found solutions working is video, thanks.
Me sirvió la solución de F130 El la placa lógica, muy diminuto el fusible y no se logra ver exactamente cual es pero la experiencia hace lo suyo, gracias man.
hola amigo una pregunta .remplasaste el f130 de la placa y eso te soluciono el problema?? por que yo tambien tengo el mismo problema con una impresora epson l4160 que muestra el mismo error ya he descartado todo y el error apunta a placa
How do I become a member to your xp 15000 channel?
Hi Kevin I can’t seem to find the video of how you test the tint f301 fuse on the motherboard of the Epson ET-2720. Also how to check and remove the print head. Any help appreciated. Many thanks, Darren
How to measure epson head before installing it, to see if it is ok or damaged
Oh my dear, I have the same printer, it turns off at the end and the screen does not light up ❤
Muito Obrigado, consegui sanar esse erro na minha Epson L3150. Thank You Very Much!!
Olá amigo pra resolver você refez o conector do flat ou trocou a cabeça de impressão?
@@joaocarvalho9774 Tudo bem?! Refiz os contatos do flat.
Hello I had that error. And cleaned the ribbon cable and the error is gone but the printer only prints blank pages. I replaced the headprint and it stills printing blank pages. I orderd from your website the ribbon cable and see if it fixes it. if I don't have the error anymore and it stills print blank pages, what else could it be?
Hello friend. I got this error aswell as the 031008 on my wf 7710 after a manual head flush from your other video, i let it sit over night and the next day it turned on fine but now it prints blanks after plenty of head cleanings and nozzle checks. Do you kno what this means? Would really appreciate a response, thanks!
You are de print Jesus? good , very good. Thanks for the advice Print Jesus
I removed printer head and was cleaning it with water and then
with specialy dedicated cleaning solution CLEANSER INK STRONG.
Now I have Error E-01 after printer start.
Can such water or cleaner solution
made short inside the printer head PCB, too ?
I am convinced that if you clean printer head PCB
and then dry it before installation,
then nothing should happen to this PCB and motherboard too,
and you can use this printer head again.
Only problem is - in my opinion - HOW TO CLEAN
printer head PCB connector contacts, because after cleaning it
with water or cleaner solution, residues or oxidation can stay
on the contacts surface, which prevent good conductive connection.
What do you think about :
- using of cleaned-up and dried Printer head :
- oxidation after cleaning of Printer head contacts surface ?
Thank you very much in advance for you opinion.
The solution utilized for cleaning is alcohol-based. Allowing your printer to air dry naturally for a period of 2-5 days (The longer the better) after the cleaning of the printhead should have no enduring impact. By "naturally," I mean leaving the printer undisturbed on your table without turning it on.
Hi Kevin, brilliant videos, you have advised me in the past, ref epson wf-7720, I have now replaced print head and the print head data cable, due to burnt flat cable and burnt out print head, however I still get error code 031006, this video hints it could be mother (main) board, are you able to confirm this??, I understand there's a fuse on this board for the print head, is this an easy repair, or is it simpler to throw the board away and replace with new one, thanks in advance.
I have now purchased CC97 epson genuine main board (used for £31), seller has advised me it fully working, so time will tell when I install it 🤞😁
@@kelvinkelsall9996 did it work? I'm having the same problem
Nope it was wrong motherboard in end, version I need waz too expensive, I scrapped the printer in the end
1:12 Where is the fuse on this exact motherboard?is it the black horizontal smd to the left? thanks
Do you have a video on how to replace the whole print head cable of an epson we-7210?
WF-7210?
@@BCHTechnologies yes, I was able to figure it out . But my printer won’t turn on now. After pressing the On button the blue light by the power but turns on real quick with orange light on the error light. after replacing the print head and print head cables. My printer is not turning on. Have you ever ran into this problem ? Any advise? I’ve check that I put everything back to get her checked it 4 times.
@@BCHTechnologies update: It powered on now but I have this error code 033007.
hello friend... please I would like to know if the continuous ink system of an epson L200, could serve the wf-2530
I am not familiar with these models but sounds promising.
hello sir. how could i kow if the F1 on the motherboard is good? i check mine using ohmeter, i had a reading of 950 ohm.
I changed my print head and still get
epson error code 031006, I don't know what else to do any help would be greatly appreciated, this all happened after I tried to unclog cartridges I thought I got to much cleaner and blowed my head so I charged it , but didn't work
This happen to me but idk how to even open this printer I have a 15000
Top 👍
I would like to send you a printer. What do I do? I tried to fix it and I put in a new printer head but it's still not working. I'll send you everything
My print head cable is burnt but there is no sign of burned inside the print head.Is it possible that my print head is safe
Absolutely no
How do I fit a error code 0x9A on a wf7620 I removed the printer head cable an got a error code 0xC1
Why dont Epson seal their print head connector so ink does not short out the print head and cause damage also to the mother board....i like Epson but this problem is preventable and should never happen !!!!!!!
I need help fixing my ecotank 2720 same error
You can send it in for us to repair it
f1 and print head have been replaced, but error 031006 still appears, what's the solution?
Did you fix the printer?!
My printer c5290 error 031006, can you show me how to fix it. Thanks kiu
i have the same problem
Do you by any chance know how to fix a Epson Surecolor S80600? I'm getting an error code 1a39 and I don't want to replace my printhead.. again. This printer has 2 printheads so it's quite expensive. The manual keeps telling me it's an error code with one or both printheads but I think it's something else. I literally replaced one of the printheads three months ago and it's really uncommon for this error code to pop up again. Please give me any suggestions you may have. I'd appreciate it.
hi. I have a epson c5790 printer. My printer does not print magenta. I'm doing head cleaning, magenta color is coming. Head is intact. but after some printing, the red color still does not come on.
I inserted a solid cartridge problem persists again. please help me. thanks.
prints yellow instead of red constantly.
I have done eeprom reset. I updated the software problem continues.
That is a laser printer. We don't do laser here.
wheres the fuse is located?
pls help me to locate the fuse pls
i searched for printhead jesus😂
Me toooo
you are the printer jesus to me!
epson m3170 помогло, так же отремонтировать.
线都烧糊了,喷头,主板还是好的?
主板好的,喷头没戏了。主板一般不会坏,最多电容或者Transistor 换一下。Epson吝啬,不怎么用MOSFET,也是一件好事。
Printhead Jesus! 😂😂😂
Hi Kevin, where can I get a new printhead? Mine has a burned pin.
Hello I had that error. And cleaned the ribbon cable and the error is gone but the printer only prints blank pages. I replaced the headprint and it stills printing blank pages. I orderd from your website the ribbon cable and see if it fixes it. if I don't have the error anymore and it stills print blank pages, what else could it be?