And another cool tutorial! Well done! :) If u use decimals adjusting the length of a piston u can make it almost stepless and that is pretty useful for a forklift, for example, or any other vehicle using pistons ;)
There are a few other handy things that kAN missed: 1. You can just connect a driver's seat directly to the smart engine if you want to use like a normal engine. 2. Pistons will still be able to move without inputting a speed value. 3. If you put a single value into a math block set to subtract, it will make the value negative.
Lord Pain I really hope kan sees this. You don't need a smart engine. I made a car with 6 engines, each with a different speed. They are wired to an axle made of thin pipes, with a bearing separating each section. Pressing the switches to activate them in a successive manner not only gives you extreme speed capability, but also gives the feel of driving a manual car. Hope y'all found this helpful.
My absolute favourite part in Scrap Mechanic. I used these in 3 different ways in my Toyota Hilux (Tundra): 1) as a custom engine with torque curves over multiple gears, 2) as height adjustable suspension that will stiffen when turning (for anti-roll), and 3) as steering with specific turning angle
For those that don't know, you don't need to multiply by a negative 1 to make your number negative, just run it through the Math block set to Minus. This switches the sign of the number.
For the button controls you can also subtract one input from the other and then multiply by your desired speed or angle if you want to use one less counter block.
i was looking for one of there yesterday. But this was uploaded today so i had to learn it myself. But i'm gonna watch this anyways so i can improve :)
great video again kan it helped me a lot with progress on my scrap version off the Halo AV-14 Attack VTOL. i have a question for anyone that can help. so thanks to this video i was able to get the steering to work. pads tip forward and back for WS and in opposite directions for AD as well as pad propeller speed. my issue is that it tips like crazy. Any ideas for making it more stable and prevent the body from moving too much?
Hey kAN! Really loving your videos! Thanks for this awesome tutorial, it was super helpful. But do you think you could make a video on just how to build planes this way with the wing mod? Mine just keeps flipping over or doing 360 in the air. Thanks!
You don't need to add a counter every time you want to multiply by -1. Set the math block to subtraction and use 1 input and it will multiply it by -1.
Hey kAN I doubt you will read this but I am making a small battle bot that is wireless. I am having a trouble making it turn faster I am using glitch steering. Also I am basing it off of the real life battle bot, Tombstone. My robot is 5x3 minus the spinning bar. (8x3 with the bar included)
please help, i'm trying to make a tank steering smart engine tank steering and it isn't working, the engine just inches the wheels by one degree, then stops. letting go just puts in back one degree. pls help me i'm stuck how do you make the engine function like a car engine whilst connected to a math block
while watching this i had a thought, could you make a car more like a real life car. by that i mean gears (mutli set speeds 1-slow 2-med 3-fast) steering that changes based on speed, the faster you are the slower the steering is, thus making a car have a decent turning circle at slow speed as well as use able steering at speed (gentle) this would be useful for races as you could adjust your speed to the course.
Easy, just paint 3 switches which lead to a number block which feeds smart engine for speed. Each on switch would be a gear, similarly use those switches for turning radius
Okay for me it doesn’t work I put that math block on steering and put the seat in that block and the math block in the other one and then it still works with w and s
well...that engine didn't help really when i was to build an tank today.... i wanted to make it so that when i turn left or right with the tank then the wheels on the opposite side would go in reverse.... but that is too complicated for me...also.. i wanted it to be an RC tank...which made it even harder since its didn't want ti to be as big as an normal player tank... so i had to make a special setup with with pistons and sensors for turning and also4 engines and 10 wheels... it still doesn't turn the way i want...... also.. it can't shoot since button signals doesn't go through the router... which is sad..
![I Built Your Weird Drawings In Scrap Mechanic [YDIB 25]](http://i.ytimg.com/vi/L9RjtqO-z3s/mqdefault.jpg)
And another cool tutorial! Well done! :) If u use decimals adjusting the length of a piston u can make it almost stepless and that is pretty useful for a forklift, for example, or any other vehicle using pistons ;)
Lord Pain hey there :)
Lord Pain flying: I am bird caravan :)
I'll have to try that again. First time I tried, it would only move in whole values. Maybe it's been updated since.
There are a few other handy things that kAN missed:
1. You can just connect a driver's seat directly to the smart engine if you want to use like a normal engine.
2. Pistons will still be able to move without inputting a speed value.
3. If you put a single value into a math block set to subtract, it will make the value negative.
Lord Pain I really hope kan sees this. You don't need a smart engine. I made a car with 6 engines, each with a different speed. They are wired to an axle made of thin pipes, with a bearing separating each section. Pressing the switches to activate them in a successive manner not only gives you extreme speed capability, but also gives the feel of driving a manual car. Hope y'all found this helpful.
yo kan, when binary gives you 0 and 1, multiply it by 2 and subtract 1, that gives a positive 1 and a negative 1. kinda easier then so many blocks.
My absolute favourite part in Scrap Mechanic. I used these in 3 different ways in my Toyota Hilux (Tundra): 1) as a custom engine with torque curves over multiple gears, 2) as height adjustable suspension that will stiffen when turning (for anti-roll), and 3) as steering with specific turning angle
YOU GENIUS! YOU JUST SOLVED ALL MY PROBLEMS
Why didn’t they add a dumb engine?
becuz dumb engine = engine, dude
@@abhayborkar4082 or a reversed engine that only go’s up to 4
When i see your views i am a bit sad... You are really so underrated Chanell...
Kan always makes me feel stupid when he says really simple stuff lol
Don't worry , it's not just you
For those that don't know, you don't need to multiply by a negative 1 to make your number negative, just run it through the Math block set to Minus. This switches the sign of the number.
For the button controls you can also subtract one input from the other and then multiply by your desired speed or angle if you want to use one less counter block.
smartengine...is that like a smartphone?
Kosmoto but it runs heavy machinery
Nice channel btw
Kosmoto I wonder how many gigs this engine has
Cyborg panda 113 Panda 0, it gets data by external parts
Smartpc
PLZ do more Tutorials! Maske for the gimble thrusters thx
Hey would the stiffness on a bearing act like a slipper clutch in a rc car?
i was looking for one of there yesterday. But this was uploaded today so i had to learn it myself. But i'm gonna watch this anyways so i can improve :)
great video again kan it helped me a lot with progress on my scrap version off the Halo AV-14 Attack VTOL. i have a question for anyone that can help. so thanks to this video i was able to get the steering to work. pads tip forward and back for WS and in opposite directions for AD as well as pad propeller speed. my issue is that it tips like crazy. Any ideas for making it more stable and prevent the body from moving too much?
side note id love a video on the memory block
kAN you don't need a multiplication. You can just connect driver seat to the smart engine.
Andrzej Wiewiórowski it’s for forward and reverse motion, it translates it to a negative number
vintageslayer it also goes backwards if you connect it to a seat
The comment isnt the thing that made me reply, its the profile pic
R o h a n .
Hey kAN!
Really loving your videos! Thanks for this awesome tutorial, it was super helpful. But do you think you could make a video on just how to build planes this way with the wing mod? Mine just keeps flipping over or doing 360 in the air. Thanks!
Random wing angle plane race?
MAKE A POGO STICK WITH THE ENGINE AND A PISTON BECAUSE YOU CAN DETERMINE HOW HARD OR SOFT IT IS!!!!
does this work in survival?
Thanks kAN!!! You just made my day! :D
Try to create a computer using the number blocks and memory modules
Did sorta
He made a camera and potato internet if that pleases you
I mean it's programmable with Spud net and an ALU
@@boi4522 In the future, we'll run scrap mechanic in scrap mechanic
this tutorial helped me a on building my first plane.
finally the tutorial we all waited for
:)
Pls give the list of modpacks u used in this video.
I missed most of it.
Sridhar G.S. Its literally only the modpack
That smart engines are realyl cool. I though I may not do it, as it seems too much complicated, but its not. cool stuff
Kan, sorry for commenting so long after but I was wondering why plane setups don't use the math block function for W-S conversion?
all the new mechanical part like gimble jet and smart sensor....etc
Thanks, youre the best!!!
Your the logic master
Very helpful
i dont own Scrap Mechanic, even though, this video was usefull :D
You don't need to add a counter every time you want to multiply by -1. Set the math block to subtraction and use 1 input and it will multiply it by -1.
no mstter which colour i paint anything, the wheels always spin stupid quickly, so much so that its useless for a machine..any advice?
Could be used to make a transmission?
for some reason, when i give it a value from the default counter, it doesnt move the piston or bearing. how do i fix this?
How do you make roll and pitch on the same wing with the same ailerons
Awesome
Hey kAN I doubt you will read this but I am making a small battle bot that is wireless. I am having a trouble making it turn faster I am using glitch steering. Also I am basing it off of the real life battle bot, Tombstone. My robot is 5x3 minus the spinning bar. (8x3 with the bar included)
please help, i'm trying to make a tank steering smart engine tank steering and it isn't working, the engine just inches the wheels by one degree, then stops. letting go just puts in back one degree. pls help me i'm stuck how do you make the engine function like a car engine whilst connected to a math block
How do you get the airfoils straight? I search for them and only get 15 and 30 degree ones
The modpack has regular straight ones. The straight ones got moved from the wings mod into the modpack.
@@kANGaming What should I search for? Thanks for responding. Love your vids
while watching this i had a thought, could you make a car more like a real life car. by that i mean gears (mutli set speeds 1-slow 2-med 3-fast) steering that changes based on speed, the faster you are the slower the steering is, thus making a car have a decent turning circle at slow speed as well as use able steering at speed (gentle) this would be useful for races as you could adjust your speed to the course.
Easy, just paint 3 switches which lead to a number block which feeds smart engine for speed. Each on switch would be a gear, similarly use those switches for turning radius
hey uh i am working on smart engine train how would i make a speed regulator?
how to use the pull button start to make a engine start
There is no a and d converter on the modpack
thx
So with this you can make realistic tank controll, so pls do it in a video!
Can u make a mortar with this so it will be stronger
Hi! I m intersted to use the modepack but I don't know it s name. Can somebody help me pls?
Do a pneumatic suspension whit pistons and these motors.
And kan make pistion susption.
KEWL VIDEO
To make a button have a value of -1 just connect it to a minus math block
I am not first ;)
So close...
I just hook the pitch bearings to the seat
11:48 Plane controls for those who need them
+-$&"
Coool
What is that X thing i cant find it
How do i use the mathe block
just when i wanted
So you didn't want to wait for durf?
Durf is a Euroboi spread the word
Okay for me it doesn’t work I put that math block on steering and put the seat in that block and the math block in the other one and then it still works with w and s
I think I can get some ideas for scrap man's flooded world
i'm doing it in version 5.1 and it doesn't work...
help
so basically i can make a car with the smart engine
what's the mods name?
Use this in a mm like a luck thing.. (too fast is alot of power vs too slow is lowest setting) engine wise
I turned on Captions and the intro you said Hello Guys my Name is Cod
the part with the 123 button doesnt work for me :
and the thing doesnt stay in the AD conversion
what is the mod
well...that engine didn't help really when i was to build an tank today.... i wanted to make it so that when i turn left or right with the tank then the wheels on the opposite side would go in reverse.... but that is too complicated for me...also.. i wanted it to be an RC tank...which made it even harder since its didn't want ti to be as big as an normal player tank... so i had to make a special setup with with pistons and sensors for turning and also4 engines and 10 wheels... it still doesn't turn the way i want...... also.. it can't shoot since button signals doesn't go through the router... which is sad..
Не всё понял ,но понял )
Build a quadcopter with actual propellers
Hi, what are your education degree
‘Ya gotta be smarter than the engine
what is it called?
awesome vid, however, for tutorials, I recommend you lower the speed in which you are talking. For a tutorial you talk way too fast.
JS S crank up your listening speed boi
Pause Button.
Third view and cement most likly
This makes me hate the fact this games doesn't allow custom key mapping on the bearings
It didn’t work for me???? Why?
i tried it on scrap mechanic and it did not work
I think in new update is not working
I have scrap mechanic problem is I don’t have a freaking computer that can run it I bought it August 2016
in the first 600
I am 70 891!
"super simple stuff"
First CoMmEnT B O I
69th comment got 'emmm!
...
PFFFFFT AHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAAAAA..aaaaa...
570th like woooooo
I am not last
Where’s the notification squad at????
I’m 24th
mee too #189th
I found it so confusing.(little bit)
Can i have some friends?
First like
Lol when I like it was first too but bc RUclips takes a while to load lot peeps think they first
Ur like was 2 min after mine
Or u like at same time
9 th
K
Wha?!
What?
58th ;)
First comment
Ievroe 9e