How to fix mindray T5 patient monitor ( continuation)

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 29

  • @aliibrahem3691
    @aliibrahem3691 3 года назад

    Big...fan sir keep up the good work ✌️

  • @sportsbuddy27
    @sportsbuddy27 3 года назад

    Saludo po sir pinoy pala kau..

  • @seven7officiel016
    @seven7officiel016 Год назад +1

    I have a pdj 3000 patient monitor which remains stuck at the boot menu please help me thank you

    • @roysantik
      @roysantik  Год назад

      If stuck in the logo you need to update the software or reinstall the software again.

    • @seven7officiel016
      @seven7officiel016 Год назад +1

      @@roysantik Can you send me software ans update instruction

  • @tahseendar1917
    @tahseendar1917 Год назад +1

    Sir cmc monitor showing idle sector 9 monitors are connected but 3 are showing idle sector what to do

    • @roysantik
      @roysantik  Год назад

      Common issue of hypervisor mindray CMS try to discharge the patient on the monitor and restart the monitor and admit patient again.. if still idle restart the CMS..

  • @roysantik
    @roysantik  4 года назад

    Sir, Error 28 is a Peak voltage reading problem, can you check the mosfet transistors.

  • @firanteengineer4346
    @firanteengineer4346 3 года назад

    sir what is the software upgrdaing tool? which software we need to update software?

  • @tahseendar1917
    @tahseendar1917 2 года назад

    I replaced cpu board and monitor turned onn but when I shut it down it does not get started what to do now plze tell

    • @roysantik
      @roysantik  2 года назад

      Try to remove the cmos battery in the cpu board in 10sec and return it back again..

  • @fuatbogatekin5106
    @fuatbogatekin5106 3 года назад

    HELLO, MY FRIEND, THE SAME DEVICE OPERATES LATELY, WHAT CAN I DO? CAN YOU SHARE THE INSTALLATION SOFTWARE?

    • @roysantik
      @roysantik  3 года назад

      do you have a cpu board but no Software was install? I have an installation software, how i can send it to you?

  • @georgedonkor114
    @georgedonkor114 2 года назад +1

    Sir please how can I get the software

    • @roysantik
      @roysantik  2 года назад

      Sir if you have access in Mindray portal you can download the software...

  • @tahseendar1917
    @tahseendar1917 2 года назад

    Tellme what to do sir

  • @SaurabhKumar-zl2zk
    @SaurabhKumar-zl2zk 4 года назад

    How can repair display whiteness problem

    • @roysantik
      @roysantik  4 года назад

      whiteness problem of the patient monitor mostly defective display board. change display board.

  • @atifelec6536
    @atifelec6536 3 года назад

    How can reset Vitalmax 4000

    • @roysantik
      @roysantik  3 года назад

      Pacetech Vital max 4000 monitor? There is no reset in the menu, try to remove the Nvram in the main board and wait for 5 seconds and return it back again.

    • @atifelec6536
      @atifelec6536 3 года назад

      @@roysantik
      Yes vital max 4000 monitor I have problems one message display on screen (made in USA) and I can't to access the parameters ,how I can to repair

  • @putramedical4464
    @putramedical4464 3 года назад

    Mindray pm9000E spo2 comm stop

    • @roysantik
      @roysantik  3 года назад

      Try to check the flex cable harness or the spo2 module board.

    • @putramedical4464
      @putramedical4464 3 года назад

      @@roysantik modul board spo2 has been replaced with a new one