How to FIX the Volkswagen Headliners - Watch!

Поделиться
HTML-код
  • Опубликовано: 11 сен 2018
  • This is a video of how we fix the headliners on the Volkswagens that the factory glue pulls away from the main liner, we use a staple gun with quarter inch staples. This happens a lot in the 2006 to 2010 Volkswagen. The older Volkswagens 2005 and under have a very thin headliner and you can use headliner adhesive glue for them, very lightly. Do not try gluing these at all. Staple gun is needed.
  • ПриколыПриколы

Комментарии • 41

  • @ezpz7143
    @ezpz7143 2 года назад +6

    This is a great inexpensive repair for this problem. Thank you for sharing

  • @scottsienkiewicz8371
    @scottsienkiewicz8371 3 года назад +5

    Very awesome! we are going to sell our Wolfsburg that has served us well now has 200k and it needs a few repairs like this one then it will be back to 100%. It's only worth 1400.00 and we don't need to spend 400$ in repairs. Thank you very very much!!!

  • @dpress8381
    @dpress8381 Год назад +2

    Thank you for showing us this.

  • @scottheaton8469
    @scottheaton8469 3 года назад +1

    I just did a headliner job in a car, and I ended up cutting the thing in half so I wouldn't have to take a window out. Glued the 1st half on before I put it back in and carefully smoothed the 2nd half in in place. Almost better that my cut wasn't immaculate, fit together like a puzzle. Few hours, $18 Walmart blanket and $15 can of glue, turned out close to perfect, better than I expected. Would have been perfect if I would have tracked down a grinder or wire brush, needed a bit more scraping. Good option for an older car when you want to keep the cost down.

  • @Detoxingforlife
    @Detoxingforlife 3 года назад

    Awesome dude

  • @smb7304
    @smb7304 3 месяца назад +1

    Awesome job thanks 🙏

  • @darrellroireau4061
    @darrellroireau4061 4 года назад +4

    Good idea but I couldn't leave a wrinkle lol. Thx for the tip though because my gti sags by the dome light.

  • @ivandimov9712
    @ivandimov9712 5 лет назад +1

    Hi, do you think the same method will work on Audi A4 B7 Avant?

  • @rogerjones3504
    @rogerjones3504 3 года назад +10

    rough as fk...take it out and re cover it

    • @Tiyratania
      @Tiyratania 2 года назад

      Most people don't care or have the time to wait 3 days for their headliner glue to dry

    • @rogerjones3504
      @rogerjones3504 2 года назад +2

      @@Tiyratania That comment proves you haven't got a clue on headliners

    • @moscuadelendaest
      @moscuadelendaest 18 дней назад

      @@Tiyratania you can drive without it and it takes 20 minutes to cure. wtf?

  • @Detoxingforlife
    @Detoxingforlife 3 года назад +1

    What PSI did you set your compressor at? I almost drove the first staple into oblivion lol.

  • @pareshparmar130
    @pareshparmar130 4 года назад +1

    Sem problem in my car thank you tip

  • @sparklepaige23
    @sparklepaige23 3 года назад

    Bless youuuuuuu

  • @jimcox2112
    @jimcox2112 Месяц назад

    Thank you!

  • @sk8allica1
    @sk8allica1 3 года назад +4

    the airbag clip unclips and under that clip is a hidden screw! you just broke that panel lol

  • @babagandu
    @babagandu 2 года назад

    Wow exact same place where my headliner is going down

  • @SoloFraggersGaming
    @SoloFraggersGaming 2 года назад +2

    Seems like all volkswagen cars has that issue by the doom light

  • @timwalker2778
    @timwalker2778 Месяц назад +1

    I never understood why the headliner and the pillars are covered in cloth. It should be a molded plastic piece from the same material as the dash.

  • @NicolasDeWolfe
    @NicolasDeWolfe 3 года назад +14

    Do not recommend staples. It will tear eventually and you won't be able to staple again because you won't have enough fabric. Reglue is the only lasting option.

    • @billabongrichie
      @billabongrichie 6 месяцев назад

      You could use the staple then superglue like you would a wood joint and wood glue. I have used binder clips and superglue with pretty decent success.

  • @Tiyratania
    @Tiyratania 2 года назад +1

    Very straightforward lmaooo

  • @vitaliyzvarych4740
    @vitaliyzvarych4740 4 года назад

    Where are you located?

  • @kibosabi
    @kibosabi 3 года назад +1

    And what about the middle,just hang in there? :)

  • @kukuletz79
    @kukuletz79 Год назад +1

    Better use some glue in there....

  • @geriatricginger
    @geriatricginger 2 года назад

    this is one step above thumb tacks.. lol

  • @moscuadelendaest
    @moscuadelendaest 18 дней назад +1

    you would spend half that time if you've just removed the hole headliner board and glued a new piece of cloth onto it.

    • @FreedomtravelerCT
      @FreedomtravelerCT  5 дней назад

      Yes, we also do that as well on certain vehicles. This gets it by speed and efficiency. Yes, it’s not the proper way, but it works

  • @carlosarredondobosch418
    @carlosarredondobosch418 9 месяцев назад +2

    All Volkswagens have such defect. What can say the VW factory?

    • @carlosarredondobosch418
      @carlosarredondobosch418 9 месяцев назад +1

      I have Seen Golfs, Jettas and Passats with headliners falling down.

  • @sk8allica1
    @sk8allica1 3 года назад +4

    just pay an upholsterer, dont ruin your headliner

  • @Detoxingforlife
    @Detoxingforlife 3 года назад +1

    What PSI did you set your compressor at? I almost drove the first staple into oblivion lol.