Fusion 360 Mach3 Post Processor for MM32L and MM25L CNC Mills Part 1

Short video which shows typical settings for Fusion 360 post processor when using Mach3 software. used when generating code for our CNC Mills

[@samturner-d9g]

Great information and really good quality products and customer support.....not the cheapest but is excellent and real people that you can reach out to .

[@cnc4youUK]

Really glad you got your machine up and running.

[@DavidFieldhouse-y2t]

Brian, thank you for helping me get into using Fusion with Mach 3.

[@cnc4youUK]

glad you found it useful

[@designomomento]

Thanks for the video. I have a mach3 cnc for wood works. I have a strange issue with fusion360. Post process file is preloaded for mach3 I choose that one. I load gcode to the mach3 mill start cycle after reset axises the machine only drills and stops after gcode sequence ends. Everything seems ok but behaviour of cnc is just like this. I dont have same problem with artcam but I’d rather to use fusion360 not the artcam

[@allthegearnoidea6752]

Great video and thanks for sharing

[@cnc4youUK]

Glad you found it useful

[@sleu752343]

I will try to be brief I am running fusion 360 and Mach 3 on a old email which has been converted to nema 42 with gecko drives I had an issue infusion and the tech support had me reset my preferences which caused me to lose my post-processor the machine has no tool changer it does not have spindle speed in the software and I do not use you 28 or g 54 I have downloaded the artsoft post-processor but I need someone to help me to remove the g28 and g54 lines of code I have gone in and set the the parameter to clearance high does the post-processor still puts in g28 and g54 what are the other the machine has no limit switches any advice how to modify the post would be greatly appreciated thank you

[@rubymccoy4678]

Promo SM 🙏