There's an adapter that comes with the Star link.. Step 1. The cable that comes from the radio mounted on the roof Step 2. Connect it to the adapter Step 3. There's a cord that's already attached to that adapter, connect it to the router . Step 4. In that adapter, there's a RJ59 point in that adapter besides the already attach cable that u inserted on the Router . Step 5. Insert your cat6 Cable long enough to whee you want to extend it to Step 6. Connect the new cable to Access Point for wireless connection or switch for more Ethernet Ports.
Sorry, but what "radio mounted on the roof" are you referencing? All I have on the roof is the actual dish itself with the long cord coming down through a window and attaching it to the router. Thanks for any clarification.
@@DennisDocos-pl2fd don't cut the injector Cable.. connect it how it's supposed to be connected.. any High Speed Router works with Starlink.. after you connect it together switch the two routers off, it will connect... Power it on back after some seconds. Then set your second router up
@@conniegal201 the dish.. the cable that comes directly from the connect it to the injector then from injector connect to Starlink router .. besides the cable that's already attached to the injector you will have RJ59 port that you plug your Lan Cable then connect the lan Cable to the additional router or switch that has wifi
Hi Tom. To install the Rujie is necessary to bypass the Starlink router? And can I use the starlink mesh system for indoor plus the Rujie for outdoor? Is I can I have to bypass tehmmhe starlink router for both?
So I have starlink coming in about a week. There were a couple things I wanted to do with it. First I have a detached work from home office I would like to connect to. I want to connect through a buried cable though. If I got outdoor ethernet cable and a router would this work? By connecting to the main starlink modem then running the ethernet cable to my office then hooking it into the router? The 2nd thing is I have a 3 story house I want to create a mesh system so it spreads the signal through out my home. I was think of getting a mesh system with 3 wifi 6 access points. Would this work to spread the signal through my home? Thank You.
So I almost just thru my Starlink out because I was trying to use the mesh deco and it took forever to set up and then it kept disconnecting I was loosing my mind I bought the adapter but for some reason I was loosing signal and it would t stay connected what was I doing wrong. Was it the brand?
Well, i had gotten the 150 foot cable but it is still short by 60 feet. So, my only option will be to install my starlink router in an enclosed, vented, weatherproof container. Use the ethernet adapter, since it's a gen2, and run an ethernet cable 60 feet to my house along with a 3rd party router. Does this sound right? Also, thanks for the video, very well done!
We are in a heavily wooded area and will not cut down trees just to place a Starlink dish by the house; but there's a spot about 200' from the house where the dish can be placed for full sky access. Can we get a 200 to 300 foot extension cable to hook the dish to the house? Thanks so much for your excellent videos.
That app that you’re using told me I could not get Starlink, but I went ahead anyhow and it’s perfect and I have a lot of trees around my house don’t trust that app
You might hire a tree service team to top one of the tallest tree's and mount the starlink into the tree itself - we have done this for a few clients on the Northern California Coast
There's an adapter that comes with the Star link.. Step 1. The cable that comes from the radio mounted on the roof Step 2. Connect it to the adapter Step 3. There's a cord that's already attached to that adapter, connect it to the router . Step 4. In that adapter, there's a RJ59 point in that adapter besides the already attach cable that u inserted on the Router . Step 5. Insert your cat6 Cable long enough to whee you want to extend it to Step 6. Connect the new cable to Access Point for wireless connection or switch for more Ethernet Ports.
Hi, we have 4 different Starlink Expansion Packs available. Depending on the size of the area you need to cover. Go to powertec.com.au and search for expansion connect or expansion roam and that will give the 4 options.
I bought a 2nd starlink node & connected it to the separate garage via ethernet. Signal is fine walking to the garage, but then when I walk back to the house, it won't reconnect to the node in the house. Thoughts?
I have the main unit in the house (node 1). The 2nd node is connected via Ethernet. The nodes are about 100 feet apart. I can walk from the house to the 2nd node with no signal loss, but when I walk back to the first node in the house, it does not switch from node 2 back to node 1.
Great video but let’s be real I didn’t understand what just happened simple Question for a simple answer how the hell do I extend my wifi signal From my room to the garage
There's an adapter that comes with the Star link.. Step 1. The cable that comes from the radio mounted on the roof Step 2. Connect it to the adapter Step 3. There's a cord that's already attached to that adapter, connect it to the router . Step 4. In that adapter, there's a RJ59 point in that adapter besides the already attach cable that u inserted on the Router . Step 5. Insert your cat6 Cable long enough to whee you want to extend it to Step 6. Connect the new cable to Access Point for wireless connection or switch for more Ethernet Ports. 💥.. you're done . Let me know if it works out
There's an adapter that comes with the Star link..
Step 1. The cable that comes from the radio mounted on the roof
Step 2. Connect it to the adapter
Step 3. There's a cord that's already attached to that adapter, connect it to the router .
Step 4. In that adapter, there's a RJ59 point in that adapter besides the already attach cable that u inserted on the Router .
Step 5. Insert your cat6 Cable long enough to whee you want to extend it to
Step 6. Connect the new cable to Access Point for wireless connection or switch for more Ethernet Ports.
Sorry, but what "radio mounted on the roof" are you referencing? All I have on the roof is the actual dish itself with the long cord coming down through a window and attaching it to the router. Thanks for any clarification.
Sir what router available to change in a mesh of starlink,,cause I use it starlink cable in a rj45 ,,I will cut the injector cause of burning..
@@DennisDocos-pl2fd don't cut the injector Cable.. connect it how it's supposed to be connected.. any High Speed Router works with Starlink.. after you connect it together switch the two routers off, it will connect... Power it on back after some seconds. Then set your second router up
@@conniegal201 the dish.. the cable that comes directly from the connect it to the injector then from injector connect to Starlink router .. besides the cable that's already attached to the injector you will have RJ59 port that you plug your Lan Cable then connect the lan Cable to the additional router or switch that has wifi
Hi Tom. To install the Rujie is necessary to bypass the Starlink router? And can I use the starlink mesh system for indoor plus the Rujie for outdoor? Is I can I have to bypass tehmmhe starlink router for both?
So I have starlink coming in about a week. There were a couple things I wanted to do with it. First I have a detached work from home office I would like to connect to. I want to connect through a buried cable though. If I got outdoor ethernet cable and a router would this work? By connecting to the main starlink modem then running the ethernet cable to my office then hooking it into the router? The 2nd thing is I have a 3 story house I want to create a mesh system so it spreads the signal through out my home. I was think of getting a mesh system with 3 wifi 6 access points. Would this work to spread the signal through my home? Thank You.
HI, how do you connect the mesh router to the statlink router. You said no cables? Thanks
So I almost just thru my Starlink out because I was trying to use the mesh deco and it took forever to set up and then it kept disconnecting I was loosing my mind I bought the adapter but for some reason I was loosing signal and it would t stay connected what was I doing wrong. Was it the brand?
Well, i had gotten the 150 foot cable but it is still short by 60 feet. So, my only option will be to install my starlink router in an enclosed, vented, weatherproof container. Use the ethernet adapter, since it's a gen2, and run an ethernet cable 60 feet to my house along with a 3rd party router. Does this sound right? Also, thanks for the video, very well done!
Can you splice Starlink cables together?
@@chud13 You can defintely splice the starlink cables
Great info. I would like to extend at 2kms to the farm (we live into the Woods)
I would like advice/ guidance how to spread my existing starlink connection to outhwr houses on my property. Please reach out to me
Use wifi extenders or repeaters
Start halfway through the video… good grief
Lol 😂
Thank you
thank you
We are in a heavily wooded area and will not cut down trees just to place a Starlink dish by the house; but there's a spot about 200' from the house where the dish can be placed for full sky access. Can we get a 200 to 300 foot extension cable to hook the dish to the house? Thanks so much for your excellent videos.
That app that you’re using told me I could not get Starlink, but I went ahead anyhow and it’s perfect and I have a lot of trees around my house don’t trust that app
You might hire a tree service team to top one of the tallest tree's and mount the starlink into the tree itself - we have done this for a few clients on the Northern California Coast
There's an adapter that comes with the Star link..
Step 1. The cable that comes from the radio mounted on the roof
Step 2. Connect it to the adapter
Step 3. There's a cord that's already attached to that adapter, connect it to the router .
Step 4. In that adapter, there's a RJ59 point in that adapter besides the already attach cable that u inserted on the Router .
Step 5. Insert your cat6 Cable long enough to whee you want to extend it to
Step 6. Connect the new cable to Access Point for wireless connection or switch for more Ethernet Ports.
I have a gen 3 and need an external range extender. Can you supply a product
Hi, we have 4 different Starlink Expansion Packs available. Depending on the size of the area you need to cover. Go to powertec.com.au and search for expansion connect or expansion roam and that will give the 4 options.
I bought a 2nd starlink node & connected it to the separate garage via ethernet. Signal is fine walking to the garage, but then when I walk back to the house, it won't reconnect to the node in the house. Thoughts?
Hello, did you connect 2 nodes? I need more information about that, could you help me?
I have the main unit in the house (node 1). The 2nd node is connected via Ethernet. The nodes are about 100 feet apart. I can walk from the house to the 2nd node with no signal loss, but when I walk back to the first node in the house, it does not switch from node 2 back to node 1.
Do these options work in Europe?
Everywhere
How can I find a way to control and remove callers from the Starlink router?
Create a captive portal for them
So that they'll be guest
How easiest way to extend star link signal to garage?
How’s best way to hard 250ft from Starlink router?
Great video but let’s be real I didn’t understand what just happened simple
Question for a simple answer how the hell do I extend my wifi signal
From my room to the garage
There's an adapter that comes with the Star link..
Step 1. The cable that comes from the radio mounted on the roof
Step 2. Connect it to the adapter
Step 3. There's a cord that's already attached to that adapter, connect it to the router .
Step 4. In that adapter, there's a RJ59 point in that adapter besides the already attach cable that u inserted on the Router .
Step 5. Insert your cat6 Cable long enough to whee you want to extend it to
Step 6. Connect the new cable to Access Point for wireless connection or switch for more Ethernet Ports.
💥.. you're done . Let me know if it works out
Anyone who knows how to build a WiFi billing system (with different WiFi subscription options)
Create a captive portal system for them.