this is the motor that resembles the most "Gerard morin - Hyper drive" because it runs on volts not amps, and you just can't stop this motor even on 9v input, its incredible. Thats because how you wind it, left right, left right. and also because of the absence of iron (ferrite) even though you still have steel bolts, but it is minimal. Iron absorbs watts and its not good. Also the shape of the steel bolts are important, because in this way the Lenz free is being applied, we should never redirect the lenz effect back to the rotor, which is correct how it is shown here. Congratz man. Really =)
That would have taken you the whole day to make, with a lathe and more precise CAD, and a 3d printer imagine what you could do. love the new tools and camera/lighting!
HELLO! I'm makin some a small DC motor, it has 3 slots and 4 magnet poles. I tried it by 2 - 11volt and 2-5Amper But for some reason it didn't work. There appeared a bit smoke and these cupper wire got hot but didnt spin. Could you say me where am I making mistake? And could you say me that what tips combined to ESC starts or Ends tips? If you send me something clear picture would be best. Thank you very much.
Video I fake. Image exact copy of this project. The i a hidden wire o energy source. The one I made I get just a little over 1 volt of energy. U need to add more magnet to increase magnetic field n more oil winding to get t least 5 volts. These videos are just there for you to watch so they can make money. More viewer more $$ for them.
Спасибо Вам огромное за реакцию, позже выложу основной макет, с использованием, датчиков холла и электронного регулятора оборотов, для регулирования центробежной силы и существенного снижения потерь на трении. К сожалению, RUclips по непонятным причинам ограничивает показы подобных роликов. Спасибо, с уважением Екатерина.
Hello Mr, I couldn't believe that your brushless DC motor could start. It has 10 poles and 10 armatures, so the rotor is locked down. But it still starts easily. What magic did you use?
This is your second channel, Mahansa Thank you for what you offer and explain me how the files are linked to my profile I do not know English, but translated to you and if you are Arabic, you are welcome the same request Thank you very much
Due to lack of armature there is eddy current losses and hysteresis losses , here you use a solid core rather than you have to use slotted core here....and also there is not any proper wind flow inside your motor so plese make some holes in body for avoiding windage loss...
Due to lack of armature there is eddy current losses and hysteresis losses , here you use a solid core rather than you have to use slotted core here....and also there is not any proper wind flow inside your motor so plese make some holes in body for avoiding windage loss...
Dari sekian banyak tutorial yang anda buat, belum ada yang volteg dan amper besar,,, Volteg boleh tinggi, namun amper juga harus di perhatikan, saya tunggu inovasi nya dengan volteg tinggi dan amper yang besar juga,,, kalau seperti ini hanya untuk main mainan saja
This is a prototipe ( in general ...) for a mor powerfull motorcycle engine . The materials will be different , but this is the general ideea ...for a brushless electric engine for a e-motorcycle ...
I like the video. It's useful content and I'm grateful for the information. Is there like one company out there that specializes in making really, really bad youtube video music? I mean, like, seriously! It's like being repeatedly hit over the head with a casio keyboard!
friend is very good the project but those coils of suantas turns is and that caliber of wire is missing those details to make a good generator greetings from venezuela
I would like to make a liquid cooled BLDC motor strong enough to replace the diesel engine in my 30' monohull sailboat. Any ideas on how to kick this up to around 20KW's?
friend shows in detail how the wire is connected, positive and negative at the end of the coil, and I want to know if I start to wind the coil with 2 wires simultaneously?
If you do this as a generator, the output of the wires will be three-phased sine waveforms. If you have an electronic circuit that can transform the three-phased output into DC or anything else you need (AC), than yes it could be. Although, it might be quite difficult if you have no knowledge in electric circuits. If you decide to go with this, you will need a three-phased to single phase converter, or three-phased to DC converter. Good luck to you.
Wishing this video is more informative, on how did he find which side of the magnets polarity, and how he came up the 4 end wires from wiring the motor... Also how to make 250w/350w brushless motor...
Before you glued those bearings in place I would’ve ran a piece of metal round stock, or a shaft through the The middle of both of them to make sure they’re lined up and more parallel then glue them.
Lo podría hacer para un auto? Quiero ponerlo en las ruedas de atrás. Como lo haría? Todo hecho en casa. . Que número de cable, cuántas vueltas, la tuerca. El imán. Gracias.
this is the motor that resembles the most "Gerard morin - Hyper drive" because it runs on volts not amps, and you just can't stop this motor even on 9v input, its incredible. Thats because how you wind it, left right, left right. and also because of the absence of iron (ferrite) even though you still have steel bolts, but it is minimal. Iron absorbs watts and its not good.
Also the shape of the steel bolts are important, because in this way the Lenz free is being applied, we should never redirect the lenz effect back to the rotor, which is correct how it is shown here. Congratz man. Really =)
A very complex but basic project - no special tools/materials needed. Would be a great way to learn to work with BLDC motor and control with Arduino.
Best video good knowledge abovet 12 volt DC motor
Consumes amps but good in volts Thank you for your efforts
That would have taken you the whole day to make, with a lathe and more precise CAD, and a 3d printer imagine what you could do. love the new tools and camera/lighting!
HELLO!
I'm makin some a small DC motor, it has 3 slots and 4 magnet poles. I tried it by 2 - 11volt and 2-5Amper But for some reason it didn't work.
There appeared a bit smoke and these cupper wire got hot but didnt spin.
Could you say me where am I making mistake?
And could you say me that what tips combined to ESC starts or Ends tips? If you send me something clear picture would be best. Thank you very much.
Video I fake. Image exact copy of this project. The i a hidden wire o energy source. The one I made I get just a little over 1 volt of energy. U need to add more magnet to increase magnetic field n more oil winding to get t least 5 volts. These videos are just there for you to watch so they can make money. More viewer more $$ for them.
good information technology master
how did you connect the 4 wires at the end to get the motor running?
To the brick controller he holds at 9:52, with schematic at 9:54.
Hi it is clear where to connect but where from these 4 wire generate place explain
nice for kids to show how it works
Thanks your video👍
Veri nice, I was just thinking how instead of plastic we could use metal
Super motor ! ;)
Wow! Thanks for that kind of tutorial. Maybe it's not best efficient engine but you made it by yourself! Great job!
Why did you mark the magnets after they were already in place?
For u to know on which side eu should put it
Mucho Awesome!
can you turn on any electronic device? give examples other than lamps🙏
Its 2 phase motor only have less than 70% efficiency.i ever build one of these and it has very high cogging torque
Good evening po can i have the list of material, wala po kamrng kuryente dito sa bahay namin kaya gusto kopo makagawa ng ganyan
Very professional work, Thanks my friend ❤️❤️❤️👌👌
Hi, could you tell me how I connect the coils when I have made them separately? The connection diagram of the coils?
Olá o trabalho ficou legal. Abraço
how do we know its powerful if you dont put it under load?
Good good
Best 12 minutos of RUclips e ver!!! Tnks for the video! I want to play someone motor line this in my bike. Its possible? Havê any project?
And what about 37 seconds?
@@BGSHORTS1849 37s awesime too!!!
Hallo I'm Cambodia
Спасибо Вам огромное за реакцию, позже выложу основной макет, с использованием, датчиков холла и электронного регулятора оборотов, для регулирования центробежной силы и существенного снижения потерь на трении. К сожалению, RUclips по непонятным причинам ограничивает показы подобных роликов. Спасибо, с уважением Екатерина.
Екатерина приветствую) а где можно посмотреть? схему регулятора оборотов?
good job
Can we start without sensor?
Hello Mr,
I couldn't believe that your brushless DC motor could start. It has 10 poles and 10 armatures, so the rotor is locked down. But it still starts easily. What magic did you use?
Superb but wire gauge or how many turns?
tolle Maschine
This is your second channel, Mahansa
Thank you for what you offer and explain me how the files are linked to my profile
I do not know English, but translated to you and if you are Arabic, you are welcome the same request Thank you very much
Due to lack of armature there is eddy current losses and hysteresis losses , here you use a solid core rather than you have to use slotted core here....and also there is not any proper wind flow inside your motor so plese make some holes in body for avoiding windage loss...
Good
Nice effort man! However, if you are wondering why your motor is so inefficient, it is because you do not use an armature on your electromagnets...
Coul you please explain that further fir me, sir ?
Due to lack of armature there is eddy current losses and hysteresis losses , here you use a solid core rather than you have to use slotted core here....and also there is not any proper wind flow inside your motor so plese make some holes in body for avoiding windage loss...
siddharth pandey sounds about right but not very well explained.
@@siddharthpandey4894 thanks for the explanation
There will be no eddy or hysterisis losses as its made out of plastic so no current will flow. There will be high reluctance.
good video bro
Sir aap ne kitne number ka wire use Kiya hai
Please reply sir
Balaned better and secured better this could be a scale model radial airplane motor. Great fun
I dont think so, it looks too much heavy and not enought powerfull for a RC plane.
Wow excellent. If you use it as a generator how much voltage and amp you will get?
please make a simple practice video of the Alternating Current Generator motor technology
Which kind of glue used to make that motor
It sounds like having low rpm but high torque 😀😀👍
I think that's what most people would be looking for because you can increase RPM with gears
Very good job
Dear perfect but this motor can use for bike?
Dari sekian banyak tutorial yang anda buat, belum ada yang volteg dan amper besar,,,
Volteg boleh tinggi, namun amper juga harus di perhatikan, saya tunggu inovasi nya dengan volteg tinggi dan amper yang besar juga,,, kalau seperti ini hanya untuk main mainan saja
How to make hub motor? Instead of this
Even tho this is cool I did this before but wondering can u make vid on mak a hub motor for scooter?
beautifullllllll
Complimenti,Molto Bravo!!
This is a prototipe ( in general ...) for a mor powerfull motorcycle engine .
The materials will be different , but this is the general ideea ...for a brushless electric engine for a e-motorcycle ...
I like the video. It's useful content and I'm grateful for the
information. Is there like one company out there that specializes
in making really, really bad youtube video music? I mean, like, seriously!
It's like being repeatedly hit over the head with a casio keyboard!
Homemade electric bike hubb motor please 👌👌👌👌👌👌👌
This motor strong enough for Aircond compressor?
great bro
im curious why doesnt the copper coil create short circuit since there is no resistance in place
excelent! Can it be used like a generetor inside a eolic tubine?
Greater
Good demostration! I would like to know the rpm that motor does?
Молодец
Please make separate video for hall effect sensor
friend is very good the project but those coils of suantas turns is and that caliber of wire is missing those details to make a good generator greetings from venezuela
I would like to make a liquid cooled BLDC motor strong enough to replace the diesel engine in my 30' monohull sailboat. Any ideas on how to kick this up to around 20KW's?
i will make soon and upload soon.
friend shows in detail how the wire is connected, positive and negative at the end of the coil, and I want to know if I start to wind the coil with 2 wires simultaneously?
chanel from cambodia☝️😀😀😀😂😂🇰🇭🇰🇭🇰🇭🇰🇭🇰🇭
Can I use this for an E-bike? Greetings!
Harika süper ,dhang
Thanks ..very nice project and engineering.
Sir.9v ko capacitor konsa lagaya or 24v ko konsa lagaya he please
Where did you get the brushless motor's driver with hall sensor?
FROM PC CPU FAN
Veejay at Anore lang Malakas Hahaha 💐
One of the best i've seen
Very nice good
Hi, would you use it for a wind generator?
Can it be used as wind generator ? Please answer my question.
If you do this as a generator, the output of the wires will be three-phased sine waveforms. If you have an electronic circuit that can transform the three-phased output into DC or anything else you need (AC), than yes it could be. Although, it might be quite difficult if you have no knowledge in electric circuits. If you decide to go with this, you will need a three-phased to single phase converter, or three-phased to DC converter. Good luck to you.
It can be used to generate electric current. A generator.
Can this motor be run with a sensorless drive?
Wishing this video is more informative, on how did he find which side of the magnets polarity, and how he came up the 4 end wires from wiring the motor...
Also how to make 250w/350w brushless motor...
I want to make a generator for a wind generator out of such an engine. tell me how you can connect the windings to the outlet.
Nice good efforts thanks
ابداع
how would you wind this to get higher volts say 24 +
Fine video.
Can you please tell, what type of plastic do you use in your projects?
American Tech Can you mention the measurements of the parts you used?
Aap connections nahi samjha paaye jabki sabse mahatw poorn corporations hi hote he l
Excellent
at the time: 4:36, I see a model with many hexagonal holes, but you don't show how to do it, I find it difficult to understand
How much did you spend buying the cupper and the other things?
query
This motor can be used experimentally as generator or battery charger
Before you glued those bearings in place I would’ve ran a piece of metal round stock, or a shaft through the The middle of both of them to make sure they’re lined up and more parallel then glue them.
Yes, indeed.
"""""""Super strong"""""""""
Good job I like very much.
where he get these blue things from. 3D PRINT?
very nice!
how many Turns you have would on each pole ?
Good night
Lo podría hacer para un auto? Quiero ponerlo en las ruedas de atrás. Como lo haría? Todo hecho en casa. .
Que número de cable, cuántas vueltas, la tuerca. El imán. Gracias.
Why don't you use curved magnets
Would it provides enough power to launch an electric bike?
Cute
i would like to learn to make an alternator from scratch.