I'm the son of an old tree mechanic who now holds 5 patents in mechanical shielding against EMP's. So, I know a good mechanic and professor when I see one. By far your videos are the best I have seen on transmission repair and rebuild. And that includes the shiny corporate speakers. I love it when you flip the book and do it your way. Because you know firsthand the book causes you to get codes. Great Job. Hope it's been lucrative, and you spend it having a good life.
Hey Hiram. You are not only a great transmission tech; you are also a very talented teacher. It's great to see you making more videos for us to enjoy. I'm sure you've been the inspiration for many young men to pursue a career in transmission repair and rebuilding.
Started watching your videos after I had issues on my B3000 transmission. My nephew said "I know if we tore this thing down on the bench we could rebuild it ourselves in a couple hours". I showed him one of your vids and he said "ok, maybe not". I don't think most people understand how complicated a transmission is.
Gotta love this step by step method by one with years of experience Mr H Gutierrez Thank you brother from us builders in San Antonio Texas Great job in you videos
Hiram, so happy to see you back! I really appreciate your videos. I am a teacher in a technical college and some of your videos are required watching for my transmission course. Thank you for sharing your knowledge with us!
@@AutomaticTransmission do you know of any schools that specialize in transmission overhaul procedures? in my last job i was given a chance to rebuild one on the clock, and am amazed at how much there is to learn!!! i always thought of transmissions as alien tech written in hebrew or something. (impossible to understand) i have been in a few of them now and would really love to learn all there is to know!!! Ty in advance!!!
Great job Hiram your videos have been very helpful to many builders Your method of building the units have really helped me especially on sprag rotation and updates God bless you thanks again
Wow… I done lots of trannys in my youth, great to know which of these new ones don’t require special piston install tools…Makes me want to start taking in some tranny jobs. Clean work space is essential.. your technique is impeccable… ❤️❤️❤️❤️
Can’t thank you enough for sharing this invaluable information for the world to see! I lost all gear on my Ranger 4r44e trans. Called all Shops in town and 1500 is the best deal I got if I remove and install unit from/to vehicle myself. I’m not financially stable enough to jump at that kind of a deal, so iv decided to put on the hat and do it myself with the help of people like yourself. So far I have laid every down like this, just need to clean them Up and the rebuild following your steps. I have found three signs which I’m convinced are the culprits to my loss of all gears: Small break on valve body gasket, burnt color/worn frictions and steels, and finally the sprag is spinning both clockwise and counter-clockwise…..Ordering parts tomorrow and start cleaning process while awaiting parts. Never done this before but I’m handy and curious enough lol. Will take my time with it.
@@cantgetright7236 I guess it depends who you’re asking 🤣 It’s a lot for me especially since iv been spending on a bunch of projects. And this is my second vehicle so need not as urgent. I received my overhaul rebuild kit, put the whole thing together on the table, took it apart, and put it all together once again just to be extra thorough. I was following instructions from this guy and other credible sources. I was sure to have reassembled it perfectly. Spray painted the pan, threw it all back under the truck and bam! Shifting and riding like new. I’m thrilled because I lost all gears, and this is my biggest job so far on a vehicle. Prior to this I would change oil, break pads, fluids, and that’s about it…lol…so yeah, with a little bit of tools, patience, and willingness I believe anyone can do it.
You’re an awesome teacher explaining it in details like my friend told me when he was teaching me computer programming he said I am going to explain to you like I’m teaching a 5 year old that’s the only way I could learn it and i become a pro in it because of the way he taught me anybody can learn if they are taught the proper way many explain it like everyone is already a professional great video bud
I needed to replace my over drive planet, the bearing was toast. i used your video to figure out how to properly put everything back together once i had the trans pulled and partially disassembled. thanks
It may take a couple of days, what with pausing, rewinding, playing ,listening a few times, buy my transmission will go back together right...thank you immensely.....
My dear, I have a Ford Explorer XLT 97/98 and it has a problem with the gearbox, reverse gear has stopped working, I am wanting to make this repair and I would like you to indicate me the repair kit to buy on eBay, I live in Brazil and you helped me a lot with this video, thank you very much my friend, you won another subscriber
i dont even have a car right now but always interested how those works. and since everyday AT cars seems more populars on the market. huge congrats for all!
To drop the gear assembly to where the gear goes smoothly into the planet gear, use a thin tie down strap. Stand the trans and lower the heavy gear assembly with the thin strap holding it at the bottom while lowering it in. It will drop in, and the strap will slide out.
I never worry about what's stamped on the servo cover. Big piston goes in front ( o.d.), smaller is intermediate on 4 sps. If it's a 5 sp.,The intermediate band is 3rd gear.
You're right, even on the 4 cylinder A4LD's with the tiny intermediate servo, always goes to the back. Also the stiffer spring goes to the back. Great comment and addition to the narrative.
Why did you torque the bands to those specs? Everywhere else including the manual says 120in lbs and 2 turns back, 72in lbs wasn't enough for mine and my 5r55e slipped until torqued it farther, just curious if your experience led you to the 72in lbs
Hello Hiram. I am replacing the valve body on this same transmission. I watched this video of the complete rebuild and at one point you mentioned that the valve body replacement was another video. How can I find your video on that replacement. I have the valve body with the new solenoids. I would love to watch you do this replacement. Thank you.
I also have (own), a 1996 Ford Ranger XLT with a 4R44E transmission. I purchased this Ranger because the mechanic at the local dealership told me the engine had a rod knock, and I needed parts for my explorer (I fixed up the Ranger and never did use it for parts). After I checked it out, I found that the flex plate had sheared itself off the crankshaft bolts and destroyed itself as well as the spacer between the crankshaft and the flex plate I replaced both the flex plate, and the crankshaft spacer. After 6 months I heard a slight knocking sound. So, I replaced the timing chain and gear set. This did not cure the knocking sound. So, I did some further checking, and found that once again the Flex plate was shearing itself off the crankshaft bolts. I think I know why the replaced flex plate was destroying itself. On the factory installed flex plates there is a (flex plate /flywheel reinforcement plate), welded to the flex plate. The aftermarket ones you purchase from the local auto parts supply stores do not have this flex plate /flywheel reinforcement plate), welded to them. Neither the local Ford Dealer nor any of the auto parts stores can tell me why? NOTE One: - I determined that without that flex plate /flywheel reinforcement plate), it allows the crankshaft /flex plate retaining bolts to bottom out inside the crankshaft holes, thereby allowing the flex plate to move back and forth sideways (not forward and backward), because the bolts are not completely snugging the flex plate up to the crankshaft even though they are still remaining torqued at 50 ft lbs. torque as specified in the manual. NOTE Two: - I discovered that You cannot find either that Flex Plate / Flywheel reinforcement plate, itself, the Flex plate to crankshaft mounting bolts, the crankshaft to flex plate spacer, or a complete with Flex plate /flywheel reinforcement plate), welded to it either at the Auto parts stores or on-line as both the auto parts stores, as well as the Ford dealers, all tell me those items are no longer available. The problem and issue I have is......? Question One - Why did the original flex plate destroy itself when the original owner had it (I have never met the original owner, as he lives in another state and was only passing through my area to another state when he broke down and sold the vehicle to a mechanic at the Ford dealership). Neither the local Ford Dealer nor any of the auto parts stores can tell me why? Note Three: - During research (yes, even on RUclips Video's), I have noticed that several people have had this same problem of having to replace the flex plate on their own Ford Rangers several times because of this same problem of the Flex plate destroying itself each time after replacement. Again.... The question remains........ Why? Question Two: - Why did the original flex plate destroy itself, and why do the replacement flex plates keep destroying themselves? NOTE Four: - I think possibly the replacement flex plates are destroying themselves because of the problem that the aftermarket replacement flex plates do not have that Flex plate /flywheel reinforcement plate), welded to them of which allows the bolts to bottom out thereby allowing the flex plate to still be loose and move back and forth (sideways), even though the bolts remain properly torqued. But, Six questions remain.....? Question One - Why did the original flex plate destroy itself in the first place? Question Two - What is causing this problem? Question Three - What is the cure for this? Question Four - Is there something wrong with the transmission and its components, or is it something doing with the overall drive train and/or the power train assembly together? Question Five - Dose the Transmission have to be replaced to cure the problem? Question Six - Why doesn't any of the Ford Dealerships or the aftermarket auto parts stores have an answer? Do you yourself (or anybody out there for that matter), have the correct answer to curing this "Flex Plate Self-Destruction" problem? As it seems that nobody else either locally (or on RUclips), can answer those questions for me. It seems that I have ran into a brick wall when it comes to both my Ford Explorer''s, as well as my Ford Ranger's problems. (See previous post pertaining to my Ford Explorer's problems).
Of those three models of transmissions, 5R55N, W and S, what are the differences, valve bodies? I've heard the solenoid packs on those are problematic right from the factory as are other issues. Does the SK55 Transgo improvement kit solve solenoid issues as well? We have one of these (N Lincoln LS8) that during full throttle the 2 to 3 shift occurs yet torque converter locks up before it shifts into 4th. Otherwise it seems to be healthy but for its seems slightly noisey from the day it was new. Great assembly Hiram. Second question, once all the planets and drums are installed into the case, is there an overall tolerance that should be measured for end play and adjusted with selectable washers and/or 3 tab washers etc.?
I have a 1994 Explorer LTD with a 4R44E transmission. This is a replacement transmission from a salvage yard. When I installed the transmission into the Explorer (and before I attempted the first start-up), I replaced both the filter, and the ATF fluid. This replacement transmission lasted about 45 days before it started having problems. First problem. - After 45 days it got to where it wouldn't automatically upshift in the lower gears unless it had either sat and idled for about 20 minutes, (You had to manually upshift it by using the gearshift lever). After it warmed up (or got to normal operating temperature), after about 5 to 10 miles everything would function as normal in the automatic mode. But if you shut it off and went into a store and then restarted it up and went to drive it again, you always have to let it idle again (for at least 2 minutes), or it would not upshift properly again except manually. Then after doing this for about 2 months, it suddenly developed a second problem. Second problem. - I drove it home one day everything functioned normally. The following day, I started it up, let it idle for about ten minutes. I then placed it into reverse and all hell broke loose. As soon as I placed it into reverse, all I could hear was the sound of grinding gears, and it would not move. So, I placed it into drive, and everything was normal, and it would move forward in all forward gears. But, every time I again attempted to place it into reverse, all it would do was grind gears again. Any idea what went wrong or what happened?
@@trm64 does that mean I have topull the trany and have to have a transmission repair shop rebuild the whole transmission or is it something I can repair myelf as an experienced DIY mechanic who works on my own vehicles?
Hello good sir! I have a 5r55s from a 2004 exploder that has a shift flair from 1st to 2nd and no overdrive. Replaced solenoid pack and servos and no change. Do I dare tear it apart? Not too knowledgeable on transmissions
I have replacement clutch disks by raybestos. One of the packs that have a pattern as opposed to grooves. Do you know if these are directional? They are not stamped top or anything
I watched your video on 5r55w/s video and built mine a few years back, everything worked fine for about 3 months then the intermediate servo cover blew off, I cleaned the grooves and changed the servo and put another snap ring in and a week later it did it again, I end up buying a rebuilt one, but I always think its something in the valve body causing it. Could you give me your thoughts on it, I still have that trans and would love to figure out what is causing it.
My concern is always audio, trying to make sure the message gets delivered cleanly but sometimes it's impossible. I raised volume on mic just below clipping, will use fan full blast on the next one hopefully I will be intelligible through the background noise.
@@AutomaticTransmission Audio in this video was just fine. Those remote/wireless mics do a fantastic job. Most folks use the Rode brand...but they are pricey.
Hi,can you explain how the 5 gears in these trans work because they only have 3 gears positions and with an overdrive makes 4 speed, but these are supposed to be a 5 speed. Thanks.
Geat video, im starting to have issues with mine and looking at having it rebuilt. My 2010 has 138k miles. What is the going rate for rebuilds, or would i be better off just having one put in from a yard pull.?
How much to rebuild this 5 speed automobile 2009 Ford Ranger 2.3 automatic no reverse and have to take off in low 1 and overdrive light flashing sometimes it will go in reverse but struggling to pull same with regular drive and a violent shift into first at takeoff from stop what could this be the sprag???
My Ford Ranger 4wd, 2011 mod. suddenly will not function in revers gear. I can feel it try to engage but there is no torque on the wheel. Can it be some solenoid problem or more a serious problem?
I have a 2003 ranger with a 55e with 2.47 first gear and a 4.10 rear axle gear ratio. I would rather have the 55w with 3.42 first gear ratio and a 3.55 axle ratio. Can the 55w be swapped in directly or is there other things involved? like electronic issues?
What kit did you buy and where did you get it from? And for the extra parts that don't come in the kit what is the best place to order those from? thank you sir
I bought a 2004 ford ranger 3.0 2 wheel drive automatic that needed a engine, i replaced the engine and was testing it out and the trans was shifting hard, shifted for a little bit and then want pull in drive put it has 1st 2nd and reverse and ideas what it might be? Thanks for any ideas
Your videos are the best on transmissions I've seen. Looks like I will be going through my daughters first car tranny- 03' mountaineer 5r55s soon, as it is making some clunking-bumping noises when you drive about 45 or so. And it has a whine like a standard tranny with worn out bearings. It also has a delay when you go from reverse to drive. Is the 5r55s rebuild the same as a 5r55e? Thanks for the great videos!
My 99 explorer sport has literally the same issues. It started at about 140k and something bad just happened at 279k. I lost my 3rd gear I still drive it daily. I put it in second get up to 30mph then put it in drive and it skips 3rd and goes into fourth lol
Hey hiram i know are in houston bud im interested in your service is there anyway i can get your business info to get at you. That would be great! Thanks!
@@AutomaticTransmission Ok, I don't see anything like that so I opened up RUclips on the pc & I saw your number that you rarely check so I sent a text to you
It'll be easier through email. Calls and texts that are not on my contacts get deleted. I'll check and see if still there but more than likely it was deleted. Multiple calls with no messages get blocked.
Say what🤔 We're made in HIS image. HE made us with the power of free choice A good prayer: I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS. Romans 10:5/10 ct...❤️k JESUSisLord!Amen... Amen.. If you'd like to call someone who cares 83 For Truth. bc you don't know when you'll die? .y r u hesitant. .. .... .. . .........
I've waited 2 years for someone to do a 5R55E build video. Thank you!
I'm the son of an old tree mechanic who now holds 5 patents in mechanical shielding against EMP's. So, I know a good mechanic and professor when I see one. By far your videos are the best I have seen on transmission repair and rebuild. And that includes the shiny corporate speakers. I love it when you flip the book and do it your way. Because you know firsthand the book causes you to get codes. Great Job. Hope it's been lucrative, and you spend it having a good life.
Hey Hiram. You are not only a great transmission tech; you are also a very talented teacher. It's great to see you making more videos for us to enjoy. I'm sure you've been the inspiration for many young men to pursue a career in transmission repair and rebuilding.
It's me again.I need to keep the dipstick tube in the transmission
And it is a 5 R. 55. Eat transmission. transmission of a 98 Ford Ranger. Please I need help
Started watching your videos after I had issues on my B3000 transmission. My nephew said "I know if we tore this thing down on the bench we could rebuild it ourselves in a couple hours". I showed him one of your vids and he said "ok, maybe not". I don't think most people understand how complicated a transmission is.
Hands down the best . Built my 80e with him. 2 years ago n my trans is running like a champ .. ur the man !!!🤙🏻🤙🏻🤙🏻
I appreciate the effort you put in to your videos. Thanks for taking the time to share your vast knowledge Hiram.
This was the best video I've seen on auto transmissions. great work man I learned a lot
Gotta love this step by step method by one with years of experience Mr H Gutierrez
Thank you brother from us builders in San Antonio Texas
Great job in you videos
Hiram, so happy to see you back! I really appreciate your videos. I am a teacher in a technical college and some of your videos are required watching for my transmission course. Thank you for sharing your knowledge with us!
Wow, that's awesome. I'll try to continue posting when time permits. Thanks.
@@AutomaticTransmission do you know of any schools that specialize in transmission overhaul procedures? in my last job i was given a chance to rebuild one on the clock, and am amazed at how much there is to learn!!! i always thought of transmissions as alien tech written in hebrew or something. (impossible to understand) i have been in a few of them now and would really love to learn all there is to know!!! Ty in advance!!!
Totally agree. Hiram is one of the best instructors I've seen. Not only is it educational, but also enjoyable and entertaining to watch.
Great job Hiram your videos have been very helpful to many builders
Your method of building the units have really helped me especially on sprag rotation and updates God bless you thanks again
Wow… I done lots of trannys in my youth, great to know which of these new ones don’t require special piston install tools…Makes me want to start taking in some tranny jobs. Clean work space is essential.. your technique is impeccable… ❤️❤️❤️❤️
Can’t thank you enough for sharing this invaluable information for the world to see! I lost all gear on my Ranger 4r44e trans. Called all Shops in town and 1500 is the best deal I got if I remove and install unit from/to vehicle myself. I’m not financially stable enough to jump at that kind of a deal, so iv decided to put on the hat and do it myself with the help of people like yourself. So far I have laid every down like this, just need to clean them
Up and the rebuild following your steps. I have found three signs which I’m convinced are the culprits to my loss of all gears: Small break on valve body gasket, burnt color/worn frictions and steels, and finally the sprag is spinning both clockwise and counter-clockwise…..Ordering parts tomorrow and start cleaning process while awaiting parts. Never done this before but I’m handy and curious enough lol. Will take my time with it.
Dude you've got to tell me, was it doable
1500 ain't too bad I would've done it I spent 2 grand in the past on a rebuild locally and it was so worth it
@@cantgetright7236 I guess it depends who you’re asking 🤣 It’s a lot for me especially since iv been spending on a bunch of projects. And this is my second vehicle so need not as urgent. I received my overhaul rebuild kit, put the whole thing together on the table, took it apart, and put it all together once again just to be extra thorough. I was following instructions from this guy and other credible sources. I was sure to have reassembled it perfectly. Spray painted the pan, threw it all back under the truck and bam! Shifting and riding like new. I’m thrilled because I lost all gears, and this is my biggest job so far on a vehicle. Prior to this I would change oil, break pads, fluids, and that’s about it…lol…so yeah, with a little bit of tools, patience, and willingness I believe anyone can do it.
What type assembly lubes are the blue and green?
Lubegard, you probably will find a different brand locally.
Спасибо вам ! На ваших видео учатся пол страны !!!
You're a godsend. Thank you sir!!!
Hey Hiram from Australia 🙃 Great videos as always , you doing your magic..
You’re an awesome teacher explaining it in details like my friend told me when he was teaching me computer programming he said I am going to explain to you like I’m teaching a 5 year old that’s the only way I could learn it and i become a pro in it because of the way he taught me anybody can learn if they are taught the proper way many explain it like everyone is already a professional great video bud
hiram, i watched all your video, really amazing master work! love from Canada , i have learnt so many thing from your video
I needed to replace my over drive planet, the bearing was toast. i used your video to figure out how to properly put everything back together once i had the trans pulled and partially disassembled. thanks
Best video that I have ever watched for mechanical stuff. I cant wait to watch the others.
It may take a couple of days, what with pausing, rewinding, playing ,listening a few times, buy my transmission will go back together right...thank you immensely.....
My dear, I have a Ford Explorer XLT 97/98 and it has a problem with the gearbox, reverse gear has stopped working, I am wanting to make this repair and I would like you to indicate me the repair kit to buy on eBay, I live in Brazil and you helped me a lot with this video, thank you very much my friend, you won another subscriber
Awesome video Mr. hiram, helped me rebuild my transmission at 17!
Nice work!
i dont even have a car right now but always interested how those works. and since everyday AT cars seems more populars on the market. huge congrats for all!
Thank you Hiram, for sharing your knowledge, very good video.
Brother so glad your back making videos, you do some great work
😂 that siren at 1:50 sounded creepy, lol. Thank you for the long, in-depth video!
Inspired me to learn rebuilding trannys
To drop the gear assembly to where the gear goes smoothly into the planet gear, use a thin tie down strap. Stand the trans and lower the heavy gear assembly with the thin strap holding it at the bottom while lowering it in. It will drop in, and the strap will slide out.
I never worry about what's stamped on the servo cover. Big piston goes in front ( o.d.), smaller is intermediate on 4 sps.
If it's a 5 sp.,The intermediate band is 3rd gear.
You're right, even on the 4 cylinder A4LD's with the tiny intermediate servo, always goes to the back. Also the stiffer spring goes to the back.
Great comment and addition to the narrative.
Why did you torque the bands to those specs? Everywhere else including the manual says 120in lbs and 2 turns back, 72in lbs wasn't enough for mine and my 5r55e slipped until torqued it farther, just curious if your experience led you to the 72in lbs
Muy buen video maestro
Saludos y puro pa delante 👍👌👌
Great video, my 09 Mazda premacy, AT. Acting up when going up hill and No reverse some time, what could cause this,😢
Hello Hiram. I am replacing the valve body on this same transmission. I watched this video of the complete rebuild and at one point you mentioned that the valve body replacement was another video. How can I find your video on that replacement. I have the valve body with the new solenoids. I would love to watch you do this replacement. Thank you.
I also have (own), a 1996 Ford Ranger XLT with a 4R44E transmission.
I purchased this Ranger because the mechanic at the local dealership told me the engine had a rod knock, and I needed parts for my explorer (I fixed up the Ranger and never did use it for parts).
After I checked it out, I found that the flex plate had sheared itself off the crankshaft bolts and destroyed itself as well as the spacer between the crankshaft and the flex plate
I replaced both the flex plate, and the crankshaft spacer.
After 6 months I heard a slight knocking sound. So, I replaced the timing chain and gear set. This did not cure the knocking sound. So, I did some further checking, and found that once again the Flex plate was shearing itself off the crankshaft bolts.
I think I know why the replaced flex plate was destroying itself. On the factory installed flex plates there is a (flex plate /flywheel reinforcement plate), welded to the flex plate. The aftermarket ones you purchase from the local auto parts supply stores do not have this flex plate /flywheel reinforcement plate), welded to them. Neither the local Ford Dealer nor any of the auto parts stores can tell me why?
NOTE One: -
I determined that without that flex plate /flywheel reinforcement plate), it allows the crankshaft /flex plate retaining bolts to bottom out inside the crankshaft holes, thereby allowing the flex plate to move back and forth sideways (not forward and backward), because the bolts are not completely snugging the flex plate up to the crankshaft even though they are still remaining torqued at 50 ft lbs. torque as specified in the manual.
NOTE Two: -
I discovered that You cannot find either that Flex Plate / Flywheel reinforcement plate, itself, the Flex plate to crankshaft mounting bolts, the crankshaft to flex plate spacer, or a complete with Flex plate /flywheel reinforcement plate), welded to it either at the Auto parts stores or on-line as both the auto parts stores, as well as the Ford dealers, all tell me those items are no longer available.
The problem and issue I have is......?
Question One -
Why did the original flex plate destroy itself when the original owner had it (I have never met the original owner, as he lives in another state and was only passing through my area to another state when he broke down and sold the vehicle to a mechanic at the Ford dealership). Neither the local Ford Dealer nor any of the auto parts stores can tell me why?
Note Three: -
During research (yes, even on RUclips Video's), I have noticed that several people have had this same problem of having to replace the flex plate on their own Ford Rangers several times because of this same problem of the Flex plate destroying itself each time after replacement.
Again.... The question remains........ Why?
Question Two: -
Why did the original flex plate destroy itself, and why do the replacement flex plates keep destroying themselves?
NOTE Four: -
I think possibly the replacement flex plates are destroying themselves because of the problem that the aftermarket replacement flex plates do not have that Flex plate /flywheel reinforcement plate), welded to them of which allows the bolts to bottom out thereby allowing the flex plate to still be loose and move back and forth (sideways), even though the bolts remain properly torqued.
But, Six questions remain.....?
Question One - Why did the original flex plate destroy itself in the first place?
Question Two - What is causing this problem?
Question Three - What is the cure for this?
Question Four - Is there something wrong with the transmission and its components, or is it something doing with the overall drive train and/or the power train assembly together?
Question Five - Dose the Transmission have to be replaced to cure the problem?
Question Six - Why doesn't any of the Ford Dealerships or the aftermarket auto parts stores have an answer?
Do you yourself (or anybody out there for that matter), have the correct answer to curing this "Flex Plate Self-Destruction" problem?
As it seems that nobody else either locally (or on RUclips), can answer those questions for me.
It seems that I have ran into a brick wall when it comes to both my Ford Explorer''s, as well as my Ford Ranger's problems. (See previous post pertaining to my Ford Explorer's problems).
Dowel pins missing or sloppy.
@@pieman12345678987654 - Doesthat mean I have to have a transmission repair shop tear it down and rebuild it or is it something I can do myself.?
This dude moves fast af
Cause he's faf homebwoii! ⚡️💨
Hey I being watching all your videos. I have question 09 explorer can we remove the nut on the gear shifter trany,
Of those three models of transmissions, 5R55N, W and S, what are the differences, valve bodies?
I've heard the solenoid packs on those are problematic right from the factory as are other issues. Does the SK55 Transgo improvement kit solve solenoid issues as well?
We have one of these (N Lincoln LS8) that during full throttle the 2 to 3 shift occurs yet torque converter locks up before it shifts into 4th. Otherwise it seems to be healthy but for its seems slightly noisey from the day it was new.
Great assembly Hiram. Second question, once all the planets and drums are installed into the case, is there an overall tolerance that should be measured for end play and adjusted with selectable washers and/or 3 tab washers etc.?
I have a 1994 Explorer LTD with a 4R44E transmission. This is a replacement transmission from a salvage yard.
When I installed the transmission into the Explorer (and before I attempted the first start-up), I replaced both the filter, and the ATF fluid.
This replacement transmission lasted about 45 days before it started having problems.
First problem. - After 45 days it got to where it wouldn't automatically upshift in the lower gears unless it had either sat and idled for about 20 minutes, (You had to manually upshift it by using the gearshift lever). After it warmed up (or got to normal operating temperature), after about 5 to 10 miles everything would function as normal in the automatic mode.
But if you shut it off and went into a store and then restarted it up and went to drive it again, you always have to let it idle again (for at least 2 minutes), or it would not upshift properly again except manually.
Then after doing this for about 2 months, it suddenly developed a second problem.
Second problem. - I drove it home one day everything functioned normally. The following day, I started it up, let it idle for about ten minutes. I then placed it into reverse and all hell broke loose. As soon as I placed it into reverse, all I could hear was the sound of grinding gears, and it would not move. So, I placed it into drive, and everything was normal, and it would move forward in all forward gears.
But, every time I again attempted to place it into reverse, all it would do was grind gears again.
Any idea what went wrong or what happened?
Probably failed sprag clutch
@@trm64 does that mean I have topull the trany and have to have a transmission repair shop rebuild the whole transmission or is it something I can repair myelf as an experienced DIY mechanic who works on my own vehicles?
On the rings it's called a step cut or locking cut whichever you prefer
Hello good sir! I have a 5r55s from a 2004 exploder that has a shift flair from 1st to 2nd and no overdrive. Replaced solenoid pack and servos and no change. Do I dare tear it apart? Not too knowledgeable on transmissions
Where did you find rebuild kits? Ford told me they discontinued, I'm worried I can't find bands or bearings specifically #3 Thrust bearing.
Great tutorial! I wonder. In the superior valve body kit. There is a pressure riser component. Do You have a video on where it goes?
I have replacement clutch disks by raybestos. One of the packs that have a pattern as opposed to grooves. Do you know if these are directional? They are not stamped top or anything
I watched your video on 5r55w/s video and built mine a few years back, everything worked fine for about 3 months then the intermediate servo cover blew off, I cleaned the grooves and changed the servo and put another snap ring in and a week later it did it again, I end up buying a rebuilt one, but I always think its something in the valve body causing it. Could you give me your thoughts on it, I still have that trans and would love to figure out what is causing it.
Bro, the fan has never been a problem. Your in Texas and as someone who lived there, it gets to hot not to use a fan.
My concern is always audio, trying to make sure the message gets delivered cleanly but sometimes it's impossible. I raised volume on mic just below clipping, will use fan full blast on the next one hopefully I will be intelligible through the background noise.
@@AutomaticTransmission :) i could here you fine. I've been a sub here for a long time and i have never had issues with hearing you.
@@AutomaticTransmission Audio in this video was just fine. Those remote/wireless mics do a fantastic job. Most folks use the Rode brand...but they are pricey.
Hi,can you explain how the 5 gears in these trans work because they only have 3 gears positions and with an overdrive makes 4 speed, but these are supposed to be a 5 speed. Thanks.
Thank you.
Man been waiting for a video for long!…..
Geat video, im starting to have issues with mine and looking at having it rebuilt. My 2010 has 138k miles. What is the going rate for rebuilds, or would i be better off just having one put in from a yard pull.?
Who makes the best and worst transmission rebuild parts/kits?
I wish I knew
Excellent tutorial!
Buen video
How much to rebuild this 5 speed automobile 2009 Ford Ranger 2.3 automatic no reverse and have to take off in low 1 and overdrive light flashing sometimes it will go in reverse but struggling to pull same with regular drive and a violent shift into first at takeoff from stop what could this be the sprag???
Nice job
learned a lot--much appreciated
My Ford Ranger 4wd, 2011 mod. suddenly will not function in revers gear. I can feel it try to engage but there is no torque on the wheel. Can it be some solenoid problem or more a serious problem?
Where did you buy the ring gears from
I have a 2003 ranger with a 55e with 2.47 first gear and a 4.10 rear axle gear ratio. I would rather have the 55w with 3.42 first gear ratio and a 3.55 axle ratio. Can the 55w be swapped in directly or is there other things involved? like electronic issues?
What kit did you buy and where did you get it from? And for the extra parts that don't come in the kit what is the best place to order those from? thank you sir
Does this rebuild address the "Servo Bore" issue?
I bought a 2004 ford ranger 3.0 2 wheel drive automatic that needed a engine, i replaced the engine and was testing it out and the trans was shifting hard, shifted for a little bit and then want pull in drive put it has 1st 2nd and reverse and ideas what it might be? Thanks for any ideas
Is the overdrive unit rebuildable?
Help! Idk why but my transmission had a melted pump washer like yours. Anyone know what causes that?
Thank you sir!!!
What's the part number for the solinoids
Great video. I have a question my 02 Mazda B3000 shifts at 2500 and at 70 mph the rpms are at 3000 any way to bring that down .Thank you in advance
rear axle ratio. you probably have the 4.10 axle ratio.
👍😍👍
I’ve looked everywhere and can’t seem to figure out why my input shaft won’t come out. Anyone on here know why?
omg ur back
Your videos are the best on transmissions I've seen. Looks like I will be going through my daughters first car tranny- 03' mountaineer 5r55s soon, as it is making some clunking-bumping noises when you drive about 45 or so. And it has a whine like a standard tranny with worn out bearings. It also has a delay when you go from reverse to drive. Is the 5r55s rebuild the same as a 5r55e? Thanks for the great videos!
My 99 explorer sport has literally the same issues. It started at about 140k and something bad just happened at 279k. I lost my 3rd gear I still drive it daily. I put it in second get up to 30mph then put it in drive and it skips 3rd and goes into fourth lol
Where do you buy your kits from?
whats the difference 5r55e vs 5r55w?
What’s the difference between 5r55e and a 5r44e? And can the computer tell a difference?
5R44E has 4 pinion planets and 5R55E has 6 pinion planets.
As long they're both 5R's with output speed sensor they're interchangeable.
Eres El mejor no tienes videos donde esplicas en español
Where are you located?
Where are you located
What car did this come out of?
'01 Exploder.
I need to build one that will handle around 1k hp
Anyone care to share what of the best rebuild kit?
En Español? 5R55E
You still awake?
Hey hiram i know are in houston bud im interested in your service is there anyway i can get your business info to get at you. That would be great! Thanks!
Send me an email. It's on the channel page.
@@AutomaticTransmission sorry but i cant find the email only the youtube link
It's on the "about " section
Hello Hiram, I have a transmission I would like you to rebuild, how do I get in touch with you ?
Go to the about section and send me an email.
@@AutomaticTransmission I checked it & there is no email address that I can see, only a link to your channel
I think it'll say "business inquiries "
@@AutomaticTransmission Ok, I don't see anything like that so I opened up RUclips on the pc & I saw your number that you rarely check so I sent a text to you
It'll be easier through email. Calls and texts that are not on my contacts get deleted. I'll check and see if still there but more than likely it was deleted. Multiple calls with no messages get blocked.
Say what🤔
We're made in HIS image. HE made us with the power of free choice
A good prayer:
I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS.
Romans 10:5/10 ct...❤️k
JESUSisLord!Amen...
Amen..
If you'd like to call someone who cares
83
For
Truth.
bc you don't know when you'll die?
.y r u hesitant. .. .... .. . .........
Dude what's up with the constant rocking back and forth on ur feet
This is pretty much the same as the 5R44E right?
And I can’t find these return springs anywhere ugh part # 56971
What year 5r55 is this?
2005