That entire setup inside ans out is really clean. Really like the 1LE wheels on it too, really matches the color perfectly. This thing is an absolute monster.
Hows the FZ? Wondering if youve had any time to get out and gel on it. Ive been on mine a little lately been busy. Hey I wanted to mention give B mode a chance Ive found mine stays there most of the time since the reflash other than hitting a bump in the road its fun as shit! just cant get heavy handed. lol
FZ RYDERS man it sure has been rainy here lately. I did get a chance to ride it to work the other day. I've tried B mode, I really prefer A mode. I know what you mean about a bump. I sent my ECU back and had Kirk blend the map a little for better on/off throttle. It helped! I think the throttle tube is just too easy to turn. Needs some resistance.
I have the borla atak axle back on mine. Trying to decide on which system to get. Would you say this setup with kooks catless and borla is better than stainless works and borla?
Front 285/30x20...10" wheel. Rear 305/30x20...11" wheel. Just slapped them on man, after I lowered the car an inch, I had to relocate the wiring harness in the rear drivers wheel well. Simple mod.
CEL will pop up if you have the catless headers, but if you buy with cats then it won't throw CEL. Don't worry you can remove the CEL even if you buy the catless headers by tuning the car or you can buy headers with the o2 bung also you can buy a clamp with the o2 sensor so you won't have to wield the pipe you just have to drill and it will remove the CEL.
Sound great! So did you end up taking it somewhere to get it tune and get rid of the CEL due to the Kooks Headers? I see that on your other videos you used the SCT bullydog is that something you did in your own or a tuner?
Sounds good! How much did that exhaust setup cost? I'm looking into different exhaust options. Also, are those 1LE wheels? My 2017 Camaro SS 1LE has those same wheels.
It is the Chevy Performance intake. Basically a rebrand Cold Air Inductions. I had the tune done with it at the time. I honestly couldn't tell much of a difference. It looks nice though, that's why I bought it.
how did you hook this exhaust up to the headers? it is a 2.75 inch pipe correct? what connection did you use to connect these mid/x pipe to the headers? Im asking becase it sounds awesome and im doing the same thing!
Thanks for watching! You'll have to cut the mid pipes in the same spot as you would the stock exhaust. Use the barrel clamps that come with Kooks headers. It buttons right up. Yes the x-pipe is 2.75 inches. The offroad pipes "neck down" from 3" to 2.75".
@@HeathLCK i got the kooks Longtube Catless installed as you can see in my video and man they are crazy quiet. I recently tho ended up putting cats on since I miss the not so smelly exhaust haha. Once this daily turns into a weekend/track car I’ll be putting them back on with even crazier stuff and possibly boost
Sounds Amazjng thanks for sharing 💯
That entire setup inside ans out is really clean. Really like the 1LE wheels on it too, really matches the color perfectly. This thing is an absolute monster.
I got the borla atak exhaust on mine rn, I’m currently looking for some long tube headers and after seeing this vid now I’m sold with the kooks lol
Nice, thanks for watching, I'd like to hear it.
Heath Hudnall ill send you a vid once I get the long tubes installed
No cats?
Nope
@@HeathLCK is it better without no cats?
As always another awesome video Heath. Looks and sounds awesome!
Kaizer_911 Thanks brother!
Very nice ride 💯💯💯💯💯 got to love a SS CAMARO
Nice car..sounds awesome..but please remove them mud flaps
Hahaha they are hardly noticeable and they protect my paint. They have to stay. Thanks for watching.
They noticable, gives it a bit of grandpa look....still you got a bad azz car bro...
I have a 2018 1le ss...no flaps..heck my car doesn't sound as nice as yours...overall you got a awesome ride bro...love that exhaust 👍🏾
Sounds real good, hey is it cammrd in
Thanks, no it's not cammed. That will be a future project.
Heath Hudnall oh man had no idea the stock cam sound that good !!
@@rschris check my other vids, I've added headers, x-pipe, and axleback since this one.
Nice exhaust and nice car 👍🏻
Justinarm25 thank you man
Kooks long tube headers, borla x pipe, and s type mufflers?
Correct.
Heath Hudnall is this legal in California
It's DeeDee absolutely not. But who really cares
Sounds awesome! I want one lol
FZ RYDERS thanks! I want you to have one too haha
Hows the FZ? Wondering if youve had any time to get out and gel on it. Ive been on mine a little lately been busy. Hey I wanted to mention give B mode a chance Ive found mine stays there most of the time since the reflash other than hitting a bump in the road its fun as shit! just cant get heavy handed. lol
FZ RYDERS man it sure has been rainy here lately. I did get a chance to ride it to work the other day. I've tried B mode, I really prefer A mode. I know what you mean about a bump. I sent my ECU back and had Kirk blend the map a little for better on/off throttle. It helped! I think the throttle tube is just too easy to turn. Needs some resistance.
Do you have any video in tour mode?
No, but I'll try to post one when the weather is better. Been really busy.
Heath Hudnall ok sounds good thanks bro
Did the headers bolt up top the 60606 or did you have to cut or what?? I have the 60606 and 11924 as well but I want headers
You must cut the 60606 and the headers will barrel clamp to them
I have the borla atak axle back on mine. Trying to decide on which system to get. Would you say this setup with kooks catless and borla is better than stainless works and borla?
I haven't had any experience with Stainless Works, so I can't say. Sorry.
What size are those tires and did you have to change anything except the rim to put them on
Front 285/30x20...10" wheel. Rear 305/30x20...11" wheel. Just slapped them on man, after I lowered the car an inch, I had to relocate the wiring harness in the rear drivers wheel well. Simple mod.
Which rims are those
Appreciate the response
Are those mrr wheels ? and what tire set you have looks badass
Thanks. Yes they are MRR 017. Michelin PS4S...285/30 Front...305/30 Rear
@@HeathLCK are the 305s causing any issues? No rubbing?
Bro I’m so curious does it pop up check engine light when u installed the headers?!
Yes it does, I got a remote tune to fix that.
CEL will pop up if you have the catless headers, but if you buy with cats then it won't throw CEL. Don't worry you can remove the CEL even if you buy the catless headers by tuning the car or you can buy headers with the o2 bung also you can buy a clamp with the o2 sensor so you won't have to wield the pipe you just have to drill and it will remove the CEL.
You have a cool first name. I have the same first name, LOL.
Sweet
Kooks catted headers and borla atak cat back?
Kooks catless headers, Borla cat delete, x-pipe, and S-Type
Sound great! So did you end up taking it somewhere to get it tune and get rid of the CEL due to the Kooks Headers? I see that on your other videos you used the SCT bullydog is that something you did in your own or a tuner?
Thanks! I had it tuned remotely through RDP Motorsports via the SCT Bullydog. Worked great.
Kooks headers and Borla x pipe ?
D DD yeah, and Borla S-Type. Check my other vids.
Sounds good! How much did that exhaust setup cost? I'm looking into different exhaust options. Also, are those 1LE wheels? My 2017 Camaro SS 1LE has those same wheels.
Darth Shade long tubes back ran me 3K. The wheels are MRR M017, 1LE replicas.
Is that an aftermarket intake or? Just wondering cause some people say they don’t do shit, so I’m wondering what you have.
It is the Chevy Performance intake. Basically a rebrand Cold Air Inductions. I had the tune done with it at the time. I honestly couldn't tell much of a difference. It looks nice though, that's why I bought it.
how did you hook this exhaust up to the headers? it is a 2.75 inch pipe correct? what connection did you use to connect these mid/x pipe to the headers? Im asking becase it sounds awesome and im doing the same thing!
Thanks for watching! You'll have to cut the mid pipes in the same spot as you would the stock exhaust. Use the barrel clamps that come with Kooks headers. It buttons right up. Yes the x-pipe is 2.75 inches. The offroad pipes "neck down" from 3" to 2.75".
Which borla system is this
xSLPRx Borla 60606 mid and X-pipes, Borla 11924 S-Type axle back, Kooks Long Tubes.
Heath Hudnall any drone while driving?
xSLPRx absolutely ZERO drone at anything below 1700 RPM. 75 mph on the interstate, no drone. Eerily quiet.
I have the Borla Atak on otherwise stock exhaust on my 2016 Camaro SS and it has absolutely zero drone as well.
@@HeathLCK i got the kooks Longtube Catless installed as you can see in my video and man they are crazy quiet. I recently tho ended up putting cats on since I miss the not so smelly exhaust haha. Once this daily turns into a weekend/track car I’ll be putting them back on with even crazier stuff and possibly boost
Inquiring minds want to know what y’all are paying to have your cars tuned?!
Cost of the tuner, lifetime of free custom remote tunes. Tuner I used is the SCT Bullydog. Prices vary from different vendors.
What intake is that?
Chevy Performance GMPP. Basically a blue filtered, GM branded, Cold Air Inductions. I think the CAI version comes with a fed filter.
NASTY!!!!
Redzone Thanks brother