Excellent build and very very clean. Not many people will realise how difficult it can be to get all these parts to playt nicely together so awesome job. Hope you get the money you are looking for!
M57 is a beast of an engines. Already had 3 of them in E46, E90 and E61 chasis. All of them were amazing. Here in European market they are very popular. This little beast is just stunning. Would love to try and drive it in the autobahn
Good god Brad... It's literally my dream car. Looks/Chassis of the 1, reliability/torque of a tuned m57, and with an 8hp.. SO amazing Brad!! Props to you, your abilities, and your taste for dope shit.
Really amazing build, love the idea of making the vehicle fit your needs instead of buying a new one! How did you get the Idrive to talk to the canbus?? Is it fully integraded?
Turned out nice and very intelligent and intricate guy but I sell parts for One series cars and try to accommodate everyone but we bumped heads 😢unfortunately and my patience has gotten short with age for issues! Nice Build
Hello Brad, Awesome build. What is the best way to contact you, see if I could commission you to build a conversion similar to your car shown here. What I have in mind is using a clean 2011 335d donor car, mostly the M57 engine and related diesel components, into a 2009-2013 3 Series 335i xDrive Coupe AWD. Tune the M57 to 600-700 AWHP. Make it look like a M3 as much as possible, upgrade the brakes and suspension. Look forward to discussing this project with you.
HOLY SHIT YOU WENT ALL OUT! Man, if you ever decide to tackle more projects might I suggest an SMG to 6 speed s85 v10 conversion. Manual m6’s are going for 30-40,000$ more than the smg equivalent😭 I KNOW the parts (if source-able) are massively less expensive. Maybe 8k all together with some custom cnc parts. Biggest issue is getting the ecu to work with the manual trans. Also just any s85 v10 swaps in general. Though the m57 is WAYYY more reliable😭🤦🏽♂️ I digress… bravo to you man that car is insane and I hope you made every penny back and then some!👍
@@bradtourthi Brad . hello how are you. I also did the same project. I'm thinking of coming to the United States soon. if you feel like exchanging ideas.
@Brad Tourt I wasn't mean it by u individually. Was meaning as a whole. Like what would someone do for emissions since it's technically a gas branded vehicle. Like here in IL depending where you are emissions testing is a big deal. Basic cash grab for the city. But here (Chicago) you would either have to rock dealer plates. Reg somewhere they don't test or keep re-register it every time it's due
Would you be interested in doing a paid swap? Id love a 135i with a m57 in it. These motors are getting insane numbers just completely obliterating everybody on the road with just a downpipe and a tune. I could get you the 135i and a donor 335d/535d. Would be interested in the labor all for personal vehicle not resale. I am really interested in making a track car not a street car, no need for accoutrements.
Excellent build and very very clean. Not many people will realise how difficult it can be to get all these parts to playt nicely together so awesome job. Hope you get the money you are looking for!
Love how you have parts from 1 series, 2 series, 3 series and 4 series all mixed together. And probably more!
And 5 series😂
M57 is a beast of an engines. Already had 3 of them in E46, E90 and E61 chasis. All of them were amazing. Here in European market they are very popular. This little beast is just stunning. Would love to try and drive it in the autobahn
Good god Brad...
It's literally my dream car. Looks/Chassis of the 1, reliability/torque of a tuned m57, and with an 8hp..
SO amazing Brad!! Props to you, your abilities, and your taste for dope shit.
“I wanna keep this as stock as possible”
Shoves an inline 6 down the throat
Best of the best fabricators,craftsman around,and all around great guy!
Very cool build. Seen someone making over 600hp with an m57 unopened short block just cams and headstuds at like 70psi boost
600bhp whats that in torque around 1300nm? or abit less
@@piovo11100nm ~
@@piovo1yeh 1000 ish ft lbs
깔끔하네요 .
당신의 이 엄청난 빌드는 정말 대단합니다
Really amazing build, love the idea of making the vehicle fit your needs instead of buying a new one! How did you get the Idrive to talk to the canbus?? Is it fully integraded?
Thank you, yes the Idrive is fully intergraded, it uses a canbus emulator for it. I bought all the parts from www.bavlogic.com/
Beautiful build.😍
Thank you sir!
Turned out nice and very intelligent and intricate guy but I sell parts for One series cars and try to accommodate everyone but we bumped heads 😢unfortunately and my patience has gotten short with age for issues! Nice Build
Love this car
Hello Brad,
Awesome build. What is the best way to contact you, see if I could commission you to build a conversion similar to your car shown here. What I have in mind is using a clean 2011 335d donor car, mostly the M57 engine and related diesel components, into a 2009-2013 3 Series 335i xDrive Coupe AWD. Tune the M57 to 600-700 AWHP. Make it look like a M3 as much as possible, upgrade the brakes and suspension. Look forward to discussing this project with you.
HOLY SHIT YOU WENT ALL OUT! Man, if you ever decide to tackle more projects might I suggest an SMG to 6 speed s85 v10 conversion. Manual m6’s are going for 30-40,000$ more than the smg equivalent😭 I KNOW the parts (if source-able) are massively less expensive. Maybe 8k all together with some custom cnc parts. Biggest issue is getting the ecu to work with the manual trans. Also just any s85 v10 swaps in general.
Though the m57 is WAYYY more reliable😭🤦🏽♂️
I digress… bravo to you man that car is insane and I hope you made every penny back and then some!👍
Thanks for the kind words man. I have more things in the works 🤙🏻
@@bradtourthi Brad . hello how are you. I also did the same project. I'm thinking of coming to the United States soon. if you feel like exchanging ideas.
What did you do to the exhaust?
Where did you get the front fenders?
So curious how installed center console 240i in E82
@@alexitow94 very carefully 🫣 lots of fitting and cutting ✂️
What would you do for emissions testing? Per vin it's a gas engine
Nothing as I don't do testing.
@Brad Tourt I wasn't mean it by u individually. Was meaning as a whole. Like what would someone do for emissions since it's technically a gas branded vehicle. Like here in IL depending where you are emissions testing is a big deal. Basic cash grab for the city. But here (Chicago) you would either have to rock dealer plates. Reg somewhere they don't test or keep re-register it every time it's due
What ecu are you using?
Loved the diesel wagon.. what did that swap cost roughly?
Which one?
@@bradtourt I didn't realize you had done more than one? The swaps look super clean, very detailed!
Did this end up selling? I live in Windsor and am interested in buying
Sold
How much is it making?
450hp/700tq
TURBOLAMIK FTW
Do you want to sell?
already sold for 52K
Where did u get the cluster?
ID4 motions
WOW
Would you be interested in doing a paid swap? Id love a 135i with a m57 in it. These motors are getting insane numbers just completely obliterating everybody on the road with just a downpipe and a tune. I could get you the 135i and a donor 335d/535d. Would be interested in the labor all for personal vehicle not resale. I am really interested in making a track car not a street car, no need for accoutrements.
Yeah absolutely. Swap starts at 15k in labor
@@bradtourt1 year still no coment he tought the price was 2k or sum
@@raulvoinescu2172 lol yeah probably
❤️❤️❤️❤️❤️❤️❤️🥰🥰🥰🥰🥰🥰
Does it start?
Yes, it also drives, check out the video below
ruclips.net/video/CHs0qwUMvXw/видео.html
+1
What would you sell it for?
$52,135 bringatrailer.com/listing/2011-bmw-135-18-2/
@@bradtourt :(