I started with the seven sword version though, and it's a grenade on the lower half. The toes fall off if wiggled too much, the knee armor that holds the katars are barely hold on, and the leg joints attaching it to the hips only have minimal grip. IDK how it ended up like that, pretty sure I built it according to the instructions.
The 00 and [Q]ant were when they started experimenting with moving away from the advanced ms joints and towards building the frame yourself like with the Nu
The RG exia and 00 is pretty much in the between era of early RGs and the current RGs so they are very in between kits imo, so I would to see bandai do an exia and 00 kits with how they make RGs today, that would be fantastic.
I was kinda shocked to see you call the RG 00 bad, the old review was pretty high on it. I guess new RGs are just that great. FWIW my 00 is still feeling quite good in the hand, other than the shields never staying on unless they're on the 0 Raiser.
Yeah I used to have this guy, hated it after like a month. The frame just doesn't hold up at all and barely can hold the sword at that point the leg doesn't help need to unarmor it and basically tighten up all the frame. Compare it to the epyon it like day and night cause that epyon hold up perfectly even after the tumble and can pose perfectly fine even after a long time
@@fishchips5121well, 00 isn’t neccesary the most popular series. if i had to put my bets on the next rg 2.0 it would probably be any of the seed suits, since well… they aren’t the greatest, and the exia is actually one of the better early rg kits.
In hindsight, if the 00 XN Raiser didn’t just slap everything on the back, the design would’ve been a tad bit better. Also, have the regular 00 Raiser in a box, since the hips are comically loose now, and the back of the torso where the Raiser unit attaches has come loose too.
Wasn't there an arrangement where it had the 0 raiser's binders (and all the XN unit parts fixed to it) on the GN Drives rather than directly on the Raiser unit though ?
@Fayheurblode The official config for the XN Raiser has everything on the back pack. The binders only go on the GN drives with the Raiser on. You can still put them on the drives with all the XN parts but that's more of a fan config.
it's a shame that such wonderful kits like 00 Raiser do not have a chance to get an updated version. Lately I built a RG Build Strike full package and man it looks awesome! but it's floppy,and the only thing it can do is a simple standing pose with an action base attached. I really wish we have the chance to see such kits revamped!
The OG 00 Raiser was my very first RG and the second Gunpla kit I ever built. I had no clue what RG, HG, MG, etc were so when I started building it I was a bit overwhelmed coming from an HG IBO kit. I even tried my hand at painting the inner frame. The look of the kit is great and it sat on my desk for a while. However it's a hand grenade. Parts fall off the thing constantly even by just looking at it. Especially the GN that parts you hang off of the GN drives. I say pose and don't touch it.
Tbh i never expected you to review this kit, but here we are. I just built mine a week ago and it's quite a challenge to pose but it's still quite a looker nonetheless.
Btw, you can rotate how the gundam holds the double sword by 90 degrees (or have it grab the opposite side of where you attached it) so it can hold the sword and pose like it’d actually slashing the sword.
Exia was the first RG I got and it's pretty much the only kit I don't really fiddle with very much, the stickers it came with were definitely awesome. There's something really excellent about the markings they use for them maybe it's just the fact they're a nice shade of blue. I've never heard of that particular mark setter but if it works better than mark setter/softer then it may be worth looking into closer
Hey man, how's your RG Exia doing? Is it loosen up overtime? Or is it still in the same condition as you build it? Kinda interested in buying an RG Exia but I'm kinda scared to spend my money on a kit that probably will loosen up overtime cuz I love posing my kits.
@@BronzTheBear_0408 Oh he's totally fine. I didn't really move him around too much so he isn't very loose or anything and it's been about two years since I got him. I tried doing some ground poses with him back then and they didn't really work so I just put him in a standing pose and put him on the shelf. I could maybe see it having issues if you're moving it around a lot over and over but for normal wear from posing now and then it'll be fine
5:00 Is that GG Subs karaoke I see? Or maybe some other fansub group? Idk honestly I remember trying all the different sub groups back when 00 was airing so it could be any of them. Haha damn, that's the real nostalgia right there
Truthfully, the only old RG lines that are passable or good are the 00 and Wing line other than the Gundam MK II, experience wise. It is likely due to the light weighted, but since 00 wants more weapons through variations, then that make sense.
Yeah this Gundam definitely looks way better without the jets on, the idea of not 1, but 2 support jets attached to the gundam is really cool, but the final result just looks like the jet sitting backwards on the gundam. And with how cool both the combined jet mode & individual jets look, I think the 00 gundam is better off just posed by itself, maybe with the extra swords, and having the jets by it’s sides
Mecha, can you review the HG Strike Freedom Gundam and compare it to the Perfect Strike Freedom and the Strike Gundam? Also, I love your content, especially some reviews where you made that grunt when you bent the elbow of that RX-78-2 Gundam from the Gundam Universe line.
I was upset at first when I got the XN kit as I broke the right arm of 00 when posing it, but then I realized the sword in that pose can actually hold the arm up then I dont bother to glue it back or move it ever again
with those backlogs mecha has and those pile of boxes in desperate need of sorting out, i think we must commend mecha still capable of building anything
I recently built the RG Raiser and funnily enough, it’s NOT the early RG-frame, it’s the legs connecting to the hips. There is practically no friction to hold the heavy upper body in a stable position, while the knees, ankles, elbows and shoulders are fine. I definitely understand why your hallmark early-real-grade-syndrome is mostly dismissed by other gunpla creators nowadays. They can be symptomatic of a bad kit but more often than not they aren’t the root cause.
Mine arrived during spring break but I haven't built it. Im probably gonna build it this summer after I finish building my HG Wing kits and The Black Knight Shiva.
aaah few years ago i had this kit (of course with 3rd party xn extension lol) and who knows that bandai now release the official one ^^ but seriously using old inner frame for this massive kit it will be trigger early syndrom realgrade more faster than regular 00 :3
I really hope that that start re releasing pre tallgeese real grades like they are with the Rx78 ngl. Just give us one brand new on and one 2.0 one a year and it’ll be awesome. And hey maybe if we’re lucky they’ll pull out the RG ground Gundam and gouf custom that was originally supposed to release
Went down a whole rabbit hole, never mind the why, just reached a conclusion that the new SEED Freedom's Proud Defender is SEED's take on the 0-Raiser. Saji is Lacus, Confirmed.
So I’m watching this after having built the base RG 00 Raiser and how the hell was it falling apart for you when posing it? For me it’s as solid as a rock and I’ve been posing it like crazy. Could it be that you’re too rough with it? Or is it the fact that you detest early real grades that you have a bias towards them? Also they’re GN sword 2’s not GN blades, that’s Exia.
I almost ordered this last month when it was still available for reserveration but decided against it due to the price tag, 2280Y, almost double the price of the base 00 Rider. Not too sure if I made the right decision though since the yen is currently trading far below average.
Meeeen, I really wish they would revive the HG 00 kits. Seed got that treatment. Wing got that treatment. Even Mobile Fighter G got that treatment. What's stop them from doing the same on 00
Question when the 0-Raiser turn into the XN-Raiser why the two shield wings never attach to the GN Drive of the 00 Gundam it like the whole 0-Raiser jiust attach on the backpack of the 00 Gundam is their a lore on why they don't attach on the GN Drive?.
I'm surprised the mechanism for attaching the xn raiser actually the same as MG version.. not getting this since I already owned MG version. Except for the sword attachment.
The katakana reads "zan", but I think it's supposed to be said more like "zun". The Zun-raiser (Sun-riser), perhaps a nod to the production company of the anime, Sunrise.
Want to ask cause im in curios , is it the advance ms joint solid ? Because back then around 2021 i remembered when i bought RG 00 raiser the advance ma joint kinda loose . Everytime i want to make a pose it did’nt support the weapon (hand) and the leg same too . Thank you for noticing this question .
I’m gonna feel bad for the people who read the comments before watching the video. I’ve built the original rg 00 Raiser and compared to my experience with the rg Wing Zero EW I mostly put real grades to the side until I got the Hi nu and unicorn. If you want an honest opinion I’d recommend ignoring the comments and listening to the video.
The thing that's odd is that we have an RG for GN-0000/7S 00 Gundam Seven Sword and also an RG GN-0000GNHW/7SGD2 00 Gundam Seven Sword/G Inspection Type. But we don't have an RG GN-0000GNHW/7SG 00 Gundam Seven Sword/G. 🤷♂
19:17 If D.O.T. (Dropping Over Time) is your problem, so why are you not using a joint strengthening marker.🤔 Even I am using it for my 1/100 MG Qan(t) Full Saber, and from a few other reviews that I have seen, some said that the Full Saber had a weight issue when it hold up a bigger weapon than it can handle. So when I built it, I prepared myself for this and used the marker on the important joint parts in the arms.
the pre-built MS joint frame is indeed flawed, but I don't think early RG kits are automatically "bad". if anything, they're not really meant to be constantly fiddled with, especially when straight-built. early RGs just take a lot more effort to build, and are simply not meant to be handled in a way like how we usually handle HGs. that said, despite its age the RG 00 gundam is actually still quite good. it just takes a little bit extra effort and patience
RG 00 bad?! What? It's my favorite RG that I've built. Granted I haven't built any since they stopped using the advance joint system but I remember the 00 being fantastic.
Dude, if you are having problems with the joints right out of box, it can only mean one of two things. First, you got a faulty kit, which I doubt highly. Second, given your penchant for playing and generally being rough with your kits, you screwed something up. I'm going with number two. Fact is, I never had a single problem with my RG 00 Raiser. In fact, I just recently sold it for 50% more than what I payed for it. Stop being so rough on your kits.
Well he speed builds kits for the reviews, so his perspective is already quite different from the general modeler who usually takes time to build and polish model kits.
That ERGS bs needs to stop, ok. Just because there was something bad about the early part of the RG line doesn’t mean it’s the only line that had problems up to a certain point. MG had something similar, HG had its issues, and so did PG.
![CHILE vs. BRASIL [1-2] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 9](http://i.ytimg.com/vi/5ObJt_71AYc/mqdefault.jpg)
I don't care what anyone said, I'm totally putting XN Raiser unit of the 00 Gundam Seven Sword/G. It has a total of 14 swords!
I did that with my MG XN Raiser
"How many sword do you want?"
"yes"
@@ZarlLarlack throw the qan[T] full saber's swords on it too XD
swords are strong, someone who has a lot of something strong is strong too - discount patrick coulasour
XN Raiser with Quanta and 00 7 Sword and another GN Sword 3
00 Raiser has been one of my favourites since day 1. This really brings it back with more detail.
I started with the seven sword version though, and it's a grenade on the lower half. The toes fall off if wiggled too much, the knee armor that holds the katars are barely hold on, and the leg joints attaching it to the hips only have minimal grip. IDK how it ended up like that, pretty sure I built it according to the instructions.
The 00 and [Q]ant were when they started experimenting with moving away from the advanced ms joints and towards building the frame yourself like with the Nu
The RG exia and 00 is pretty much in the between era of early RGs and the current RGs so they are very in between kits imo, so I would to see bandai do an exia and 00 kits with how they make RGs today, that would be fantastic.
Well we are getting RG 2.0, so let's get some copium that these (and every other early RG kit) gets one
I was kinda shocked to see you call the RG 00 bad, the old review was pretty high on it. I guess new RGs are just that great.
FWIW my 00 is still feeling quite good in the hand, other than the shields never staying on unless they're on the 0 Raiser.
Yeah I used to have this guy, hated it after like a month. The frame just doesn't hold up at all and barely can hold the sword at that point the leg doesn't help need to unarmor it and basically tighten up all the frame. Compare it to the epyon it like day and night cause that epyon hold up perfectly even after the tumble and can pose perfectly fine even after a long time
Yeah my 00 Raiser is still able to stand with the 0 Raiser attached with good stability so it’s all about how you handle them in the long run
@@therest9281 that's unfortunate, I hope they made some brand new 144 00 stuff soon, namely an RG Exia 2.0.
@@therest9281 that's unfortunate, I hope they made some brand new 144 00 stuff soon, namely an RG Exia 2.0.
@@fishchips5121well, 00 isn’t neccesary the most popular series. if i had to put my bets on the next rg 2.0 it would probably be any of the seed suits, since well… they aren’t the greatest, and the exia is actually one of the better early rg kits.
Funny that you used to consider RG 00 Raiser as the best RG out there with the Unicorn, but the RG line has changed so much since then
This kit overtakes my love for the full saber design.
Another early RG for mecha to rage over
hopefully it isn't a Justice situation
In hindsight, if the 00 XN Raiser didn’t just slap everything on the back, the design would’ve been a tad bit better.
Also, have the regular 00 Raiser in a box, since the hips are comically loose now, and the back of the torso where the Raiser unit attaches has come loose too.
Wasn't there an arrangement where it had the 0 raiser's binders (and all the XN unit parts fixed to it) on the GN Drives rather than directly on the Raiser unit though ?
@Fayheurblode
The official config for the XN Raiser has everything on the back pack. The binders only go on the GN drives with the Raiser on. You can still put them on the drives with all the XN parts but that's more of a fan config.
@@ixiahj It sounds like a less unstable, yet still comically top-heavy, setup.
So, just strengthen the loosened joints? Problem solved. This is plastic model hobby after all.
I really want to get the MG, it would look great with the rest of the "new" MGs from 00
I was super curious about this kit and my man comes through with a review
it's a shame that such wonderful kits like 00 Raiser do not have a chance to get an updated version. Lately I built a RG Build Strike full package and man it looks awesome! but it's floppy,and the only thing it can do is a simple standing pose with an action base attached. I really wish we have the chance to see such kits revamped!
The OG 00 Raiser was my very first RG and the second Gunpla kit I ever built. I had no clue what RG, HG, MG, etc were so when I started building it I was a bit overwhelmed coming from an HG IBO kit. I even tried my hand at painting the inner frame. The look of the kit is great and it sat on my desk for a while. However it's a hand grenade. Parts fall off the thing constantly even by just looking at it. Especially the GN that parts you hang off of the GN drives. I say pose and don't touch it.
I still remember when they still use ABS plastics for the frame. It was an absolute pain for my nipper, hobby knife and my fingers.
Tbh i never expected you to review this kit, but here we are.
I just built mine a week ago and it's quite a challenge to pose but it's still quite a looker nonetheless.
It sounds like your opinion on the RG 00 Raiser changed quite a lot since your original review 8 years ago, huh? 😅
Btw, you can rotate how the gundam holds the double sword by 90 degrees (or have it grab the opposite side of where you attached it) so it can hold the sword and pose like it’d actually slashing the sword.
Exia was the first RG I got and it's pretty much the only kit I don't really fiddle with very much, the stickers it came with were definitely awesome. There's something really excellent about the markings they use for them maybe it's just the fact they're a nice shade of blue. I've never heard of that particular mark setter but if it works better than mark setter/softer then it may be worth looking into closer
Hey man, how's your RG Exia doing? Is it loosen up overtime? Or is it still in the same condition as you build it?
Kinda interested in buying an RG Exia but I'm kinda scared to spend my money on a kit that probably will loosen up overtime cuz I love posing my kits.
@@BronzTheBear_0408 Oh he's totally fine. I didn't really move him around too much so he isn't very loose or anything and it's been about two years since I got him. I tried doing some ground poses with him back then and they didn't really work so I just put him in a standing pose and put him on the shelf. I could maybe see it having issues if you're moving it around a lot over and over but for normal wear from posing now and then it'll be fine
My favorite early real grade model kit. Has everything from bad ass giant sword, to a flying support unit and all those melee and long range weapons.
The buster sword looks more like a surfboard, though to be fair, that would be fun looking in its own way.
Just built the 00 [Q]ANT & it's solid! way better than i was expecting
5:00 Is that GG Subs karaoke I see? Or maybe some other fansub group? Idk honestly I remember trying all the different sub groups back when 00 was airing so it could be any of them. Haha damn, that's the real nostalgia right there
Thanks for this review. I've been seeing this kit at the store lately snd have beem debating on getting it or not. This review definitely will help.
Hoping that Bandai will release a lot of 2.0 RGs.
Truthfully, the only old RG lines that are passable or good are the 00 and Wing line other than the Gundam MK II, experience wise. It is likely due to the light weighted, but since 00 wants more weapons through variations, then that make sense.
Yeah this Gundam definitely looks way better without the jets on, the idea of not 1, but 2 support jets attached to the gundam is really cool, but the final result just looks like the jet sitting backwards on the gundam.
And with how cool both the combined jet mode & individual jets look, I think the 00 gundam is better off just posed by itself, maybe with the extra swords, and having the jets by it’s sides
Mecha, can you review the HG Strike Freedom Gundam and compare it to the Perfect Strike Freedom and the Strike Gundam?
Also, I love your content, especially some reviews where you made that grunt when you bent the elbow of that RX-78-2 Gundam from the Gundam Universe line.
I'm low-key glad i never had that RG in the first place since i already own the HG 00 Gundam, HG 0 Raiser and the HG 00 Raiser + GN-Sword III 😅
I have this pre-ordered, it's going to join mechs with giant sword shelf currently consisting of HG Dygengaur, and RG Destiny Impulse,.
8:02 ummm acksually, the newest RG release is Force Impulse spec ii 🤓
that is just a different color remold 👀
@@yoshigokyriyait is a main line RG release though strangely enough
I was upset at first when I got the XN kit as I broke the right arm of 00 when posing it, but then I realized the sword in that pose can actually hold the arm up then I dont bother to glue it back or move it ever again
with those backlogs mecha has and those pile of boxes in desperate need of sorting out, i think we must commend mecha still capable of building anything
I recently built the RG Raiser and funnily enough, it’s NOT the early RG-frame, it’s the legs connecting to the hips. There is practically no friction to hold the heavy upper body in a stable position, while the knees, ankles, elbows and shoulders are fine. I definitely understand why your hallmark early-real-grade-syndrome is mostly dismissed by other gunpla creators nowadays. They can be symptomatic of a bad kit but more often than not they aren’t the root cause.
Mine arrived during spring break but I haven't built it. Im probably gonna build it this summer after I finish building my HG Wing kits and The Black Knight Shiva.
aaah few years ago i had this kit (of course with 3rd party xn extension lol) and who knows that bandai now release the official one ^^
but seriously using old inner frame for this massive kit it will be trigger early syndrom realgrade more faster than regular 00 :3
Oh the HG 7swrdG was epic it bites that RG couldn't hold up! Love these weapons though!
Amazing review, I love the extra gear on this Gundam! 🤖👍
i already had to glue my rg 00 raiser together cant imagine an even bigger backpack attached, um glad i have the mg instead
I really hope that that start re releasing pre tallgeese real grades like they are with the Rx78 ngl. Just give us one brand new on and one 2.0 one a year and it’ll be awesome. And hey maybe if we’re lucky they’ll pull out the RG ground Gundam and gouf custom that was originally supposed to release
Went down a whole rabbit hole, never mind the why, just reached a conclusion that the new SEED Freedom's Proud Defender is SEED's take on the 0-Raiser. Saji is Lacus, Confirmed.
Will there be HGUC REVIVE MK-II or Hyaku Shiki review? Ya have only the review of Zeta revive so i thought you'll do them too
be sure to gloss coat before putting on the waterslides if you are using micro set and micro sol. it really hides the border.
Very beautiful! Love this design!
So I’m watching this after having built the base RG 00 Raiser and how the hell was it falling apart for you when posing it? For me it’s as solid as a rock and I’ve been posing it like crazy. Could it be that you’re too rough with it? Or is it the fact that you detest early real grades that you have a bias towards them? Also they’re GN sword 2’s not GN blades, that’s Exia.
I almost ordered this last month when it was still available for reserveration but decided against it due to the price tag, 2280Y, almost double the price of the base 00 Rider. Not too sure if I made the right decision though since the yen is currently trading far below average.
ngl, I decided to display the 0 Raiser and the RG 00 separately on their own, saved me a lot of headache
Meeeen, I really wish they would revive the HG 00 kits. Seed got that treatment. Wing got that treatment. Even Mobile Fighter G got that treatment. What's stop them from doing the same on 00
00 Gundam is a great kit at desingning and details
Question when the 0-Raiser turn into the XN-Raiser why the two shield wings never attach to the GN Drive of the 00 Gundam it like the whole 0-Raiser jiust attach on the backpack of the 00 Gundam is their a lore on why they don't attach on the GN Drive?.
As much as I love the 00 designs, masking all of those clear parts is a pain in the ass.
Does the mg version of this kit have more details?less details?or equal amount of details?
hey man, are you gonna do a review on Black Luster Soldier?
I wish Bandai waited if they would do a 2.0 of the 00 Raiser and then release the XN unit
Hay, if you don't mind, can you do an armored puppet review. I would recommend Mr. j, but all of them look great.
I'm surprised the mechanism for attaching the xn raiser actually the same as MG version.. not getting this since I already owned MG version. Except for the sword attachment.
Wait What? it was supposed to be read as XAN Raiser? I have the MG version but all this time I call it the X-N Raiser hahah!
The katakana reads "zan", but I think it's supposed to be said more like "zun". The Zun-raiser (Sun-riser), perhaps a nod to the production company of the anime, Sunrise.
Wish there was a HG version of the XN parts. Maybe this shouldn't have been an RG and maybe shouldn't have come with the Raiser parts.
Want to ask cause im in curios , is it the advance ms joint solid ? Because back then around 2021 i remembered when i bought RG 00 raiser the advance ma joint kinda loose . Everytime i want to make a pose it did’nt support the weapon (hand) and the leg same too . Thank you for noticing this question .
nope. it loose
I’m gonna feel bad for the people who read the comments before watching the video. I’ve built the original rg 00 Raiser and compared to my experience with the rg Wing Zero EW I mostly put real grades to the side until I got the Hi nu and unicorn. If you want an honest opinion I’d recommend ignoring the comments and listening to the video.
The thing that's odd is that we have an RG for GN-0000/7S 00 Gundam Seven Sword and also an RG GN-0000GNHW/7SGD2 00 Gundam Seven Sword/G Inspection Type. But we don't have an RG GN-0000GNHW/7SG 00 Gundam Seven Sword/G. 🤷♂
@xxnike0629xx the that's more odd is that ...
@xxnike0629xx you spam WISHLISTS , you hoard BOXES ...
@xxnike0629xx but in the end you still refuse to build a kit again ...
@xxnike0629xx in favour of building a BOX fort instead ...
@xxnike0629xx and fire some cheap anti-UC, Turn A, and G-Reco shots ...
"A standing stand", indeed
How does this kit compares to the MG version?
They really need to update the exia and raiser line up the the standards of kyrios and dynames
Big thanks for all your reviews! They're an amazing help to find my way through the masses of kits there are, as a Gunpla beginner 😄
The old HG XN is all white and doesnt have part separation on the sword and arms
Rg 00 demand after this 📈
Honestly I wish they had left it until they did a 2.0 gundam 00 raiser like the upcoming rg rg-78-2 2.0. The 00 gets so bad very fast
Of course it is!
Nothing quite like the old Rg’s…thankfully 😂
Too bad this couldn't be released as a separate option set. Or maybe released as an RG 2.0.
I'm ready
I'm ready
Oh no....SpongeBob, what could he possibly want?
What is your turntable rotating display name?
Hope i get my XN soon, next month maybe :>
im guilty of throwing handles away on accident lol smh
looks HG added with advance MS joint
19:17 If D.O.T. (Dropping Over Time) is your problem, so why are you not using a joint strengthening marker.🤔
Even I am using it for my 1/100 MG Qan(t) Full Saber, and from a few other reviews that I have seen, some said that the Full Saber had a weight issue when it hold up a bigger weapon than it can handle.
So when I built it, I prepared myself for this and used the marker on the important joint parts in the arms.
Waiting RG OO Raiser 2.0 its gonna be Long Wait cuz the list of early RG its so many 😅
Bandai kinda screw up the face vents of this and RG Astray Red Frame
love it's details
Day 33 of asking Mecha Gaikotsu to review the Sentinel Riobot Gurren Lagann
have you seen the hg 00 raiser gundam
my 00 raiser rg also is suffering from the early b frame problem.
Time for a remastered kit?
Raiser Moment; went TRANS AM click the video the moment it got released, really needed this, thank you. ;-;7
MG Epyon Sturm Und Drang soon? :o
is he perfect grade ver of rg 00 gundam?
How he hold the buster sword is wierd. Lol instead of slash he will be bonking enemy.
Candidate for REal Grade 2.0
the pre-built MS joint frame is indeed flawed, but I don't think early RG kits are automatically "bad". if anything, they're not really meant to be constantly fiddled with, especially when straight-built. early RGs just take a lot more effort to build, and are simply not meant to be handled in a way like how we usually handle HGs.
that said, despite its age the RG 00 gundam is actually still quite good. it just takes a little bit extra effort and patience
Cool video!!
RG 00 bad?! What? It's my favorite RG that I've built. Granted I haven't built any since they stopped using the advance joint system but I remember the 00 being fantastic.
I just started in this hobby and this makes me want more! haha. I just uploaded a video as well.
Can you use the rg version with the hg version?
No
A RG that doesn't improve on the MG aspects. XN Raiser is supposed to have a long handle. Not a handle in the middle of the GN claymore.
Dude, if you are having problems with the joints right out of box, it can only mean one of two things. First, you got a faulty kit, which I doubt highly. Second, given your penchant for playing and generally being rough with your kits, you screwed something up. I'm going with number two.
Fact is, I never had a single problem with my RG 00 Raiser. In fact, I just recently sold it for 50% more than what I payed for it.
Stop being so rough on your kits.
Well he speed builds kits for the reviews, so his perspective is already quite different from the general modeler who usually takes time to build and polish model kits.
thankfully RG 2.0 is now a thing and Bandai could make redo of problematic old RG kits.
Orrr, they could make good rg kits of things we don't have.
another fire vid
A ơi bổ sung thêm ý là lấy thiết kế bandai chứ nghe mấy câu đầu sai hết ý r
Mấy đứa ghét anh sẽ bảo anh cổ xuý chơi BL đấy
That ERGS bs needs to stop, ok. Just because there was something bad about the early part of the RG line doesn’t mean it’s the only line that had problems up to a certain point. MG had something similar, HG had its issues, and so did PG.
Psycho zaku when?