Is called RTOM "Relia tel Option Module". RTOM gets power and communicates with RTRM. Condensate Overflow switch, clogged filter switch, fan failure switch, factory smoke detector are some of the optional features of RTOM
Hi Eric, I had issues with 35 t Trane a/c unit. Unit was shot cycling about 2min run before lock out.(cuts off at 650psi) Condenser coil was cleaned and dryer filter been checked. I have not looked at the expention valve. Unit was only short cycling on first stage but it was working ok on second stage (high pressure was about 300-325 psi +30 C outside.. I would appreciate for any help. Thank you. Serge Alarm code was "comp 1 disable input / HPC " . Could please give me some advice where should be a problem. .
I ran across this York chiller unit, with a remote condenser unit model h2ca360a25d. can you show me how to trouble shoot it..
I'M LOOKING FOR THE ELECTRICALDIAGRAM
How is it not a HEATPUMP if it has a reversing valve . Why is there gas heat and rv ?
5:45
Clearly it is a heat pump. You can see the reversing valve at 3:38.
@@LeoS41280 I agree , he said in the video at 5:45 mark that it was not
Has dehumidification uses hot gas
I use a decade box to test specific modes. Use jumpers if you want to cycle each mode
Link to decade box, please.
TRANE Air Conditioners. We want to solve AC problem E: 21
Model No: sm161T4vc
What is the purpose of the left control board ?
I would like to know that too.
Is called RTOM "Relia tel Option Module". RTOM gets power and communicates with RTRM. Condensate Overflow switch, clogged filter switch, fan failure switch, factory smoke detector are some of the optional features of RTOM
just found your site, looking forward for more videos. looking for more of your videos
Hi Eric,
I had issues with 35 t Trane a/c unit.
Unit was shot cycling about 2min run before lock out.(cuts off at 650psi) Condenser coil was cleaned and dryer filter been checked. I have not looked at the expention valve. Unit was only short cycling on first stage but it was working ok on second stage (high pressure was about 300-325 psi +30 C outside..
I would appreciate for any help.
Thank you.
Serge
Alarm code was "comp 1 disable input / HPC " .
Could please give me some advice where should be a problem.
.
That alarm is for high pressure cutout the pressure switch is doing its job. Is this a heat pump? Is there a txv in the condenser area?
Nice different