HOW TO FIX Remote Key Fob for 2011-2014 Jeep Grand Cherokee | Step-By-Step
HTML-код
- Опубликовано: 21 авг 2024
- Key fob not working solution for:
2011-2014 Jeep Grand Cherokee
2010-2014 Chrysler Town & Country
2011-2014 Dodge Durango
2010-2014 Dodge Grand Caravan
2010 Dodge Journey
2010 Dodge Ram 1500 2500 3500
2011-2018 Ram 1500 2500 3500
Links:
Key Fob Skin www.amazon.com...
CR2032 Battery www.amazon.com...
Goof Off www.amazon.com...
I have been trying to have this resolved for past 3 months.
Tried your solution and now works perfectly!
Thank you mate.
Funny, I've had a 2014 Jeep Latitude and had this issue. This totally fixed it in about 3 minutes, but I had NO idea there was an actual key stored in the FOB and have owned it for over a year, lol! Thanks for the video!
Me too!! My mind was blown
I literally can’t believe the paper thing actually worked wow ….. thank you
Did this to my smart key fob, the chip was gunked up! Used some Isopropyl alcohol and it worked like magic! Saved me some cash. Keep up the good work dude!
I doubted this at first then tried the paper he is a goat
Cisco, just tried and it worked for both my fobs! You saved me over $500. Thank you!
Vero Lopez I’m glad to hear that.
Yoooooooo my key fab has been ass for the last 5 months man !!!! I was about to go to the dealership and buy a new one but after watching your video I had the problem fixed in minutes !!!! You just saved me $300 bucks man. Looking forward to the next episode of Cisco’s corner !!!!
Glad i was able to help, man !
Thank you! This is the only thing that worked to get my fobs working again. Instead of paper I used some small pieces of closed cell foam but the result was perfect! Thank you again!!
I tried the cleaning part and had no luck. I went back and added the folded paper and it worked like a charm. Thanks for your video!
Omg! Thank you my guy! The paper trick worked lol life saver!
I noticed the lock button was completely flat. So I took it apart and the puck fell off and looked like it needed cleaning. I’m going to try the paper trick! Thanks!
Thank you. This worked perfectly & saved me $600
man that circuit board was dirty but I switch everything into a new key fob and it worked....after I started the car. Thanks.
Can't believe it. My second fob stopped working 2 years ago. I cleaned it and replaced the battery to no avail. The paper trick worked like a charm! I did it to my other fob as preventative maintainence.
Sooooo going to try this today and please lord let it work! Ancira just quoted me 179$/pc for key fobs and 70$/pc for programming. Ugh! Thank you!!!
Thank you. This was very helpful and you save me $300. This was the quote from the service that I usually take my car.
Hello, Cisco. Thank you very much for you help. It is now 2022 and I'm watching this video exactly three years later🤣😂🤣😂🤣😂🤣. It solved my key fob problem 100%!! Thank you and take care of yourself.
Can’t thank you enough for this very clear, detailed video. Although my 2005 Jeep key is a little different, a little goo gone on a swab, a little tightening of the battery squeeze clips, and (though I didn’t believe it) a little folded paper to tighten up the “rubber pushing metal contact” action has both my keys locking and unlocking the Jeep after nearly a year of inconsistent remote locking. I won’t be waking the neighbors up at 6AM any more, setting off the alarm while opening the door after the locks wouldn’t remotely unlock with either key. Watching you do the work, up close, made all the difference!
John Westenberger that’s great man.
That’s great man.
I guess I am quite off topic but does anybody know of a good site to watch new tv shows online?
Idk how many times i came outside with my jeep already started because of this damn key fob. Excellent video you saved me alot of money. I really do appreciate it. Thank you bro!
Just did this on my 2013 jeep grand Cherokee Laredo and it worked. I had to play with the paper a bit to get it to work but it worked. Instead of buying a backing I took some isopropyl and cleaned those metal tabs off as well, one of them did fall off but little tack of super glue did the trick.
Oh my gosh. It worked!!! Thank you sooo much. I've been parking in my garage lately because I couldnt risk getting locked out of car. This is awesome!!!!
Can’t thank you enough brother ! Thank you !! Saved me tons. At first it didn’t work I haven’t been
Able to lock with remote in a month but when I seen your video I opened it up and I also
noticed mine had two contact rings that are suppose to go over the contact holes and they were also laying around loosely in the housing I realigned them
And now both lock and unlock work.
Just did this...actually worked! Thank you!
0MG!!!!!My key fab broke!!! this helped so much!!!!
Katherine Fritz glad to hear
IT WORKED! Soo Greatful! TKS A LOT!
Hi Cisco, thanks for the reply, Didn't realize i can just click on the show more and it will bring me to the links,
But they did not have any skins for a 2014 jeep Cherokee, said did not fit my vehicle, I did find on another site
a pack of two fobs for $34 that fit my vehicle and i will just change the circuit boards over, Thanks for you video
Ok yeah that will work too. Good luck
You sir are a saint! Thank you!!
Thank you so much, it works now 😮
Hi Cisco, Great video, I tried gluing the pucks back in, lasted a couple
of weeks then the same problem, I looked on e-bay, and Amazon but
could not find the fob cases, could your please show the link to where
you found them, Thanks again for the great video and a big THUMBS UP
Pee Dee click the down arrow next to the title of the video. Hope this helps.
Thanks for watching
It worked for me exactly as you described. Thanks for posting this video! Life saver! 👌🏽👌🏽
This is awesome Cisco keep up the good work man 😎🤙
Call of Dutys MVP thanks man
You saved me so much money. Thank you
Worked great for my key fob aswell , didn’t even seem that dirty but must’ve been dirty enough to cause the problem .
Thanks for your video , legend !
Can you use regular alcohol pads to clean them I don't have goup off
Thank you it save me 120.00
Great fix...my lock and horn kept going off!
Used methylated spirits everything else the same. Bingo. Thanks heaps dude!
Worked just like you said. Thanks.
Thanks man this definitely worked
Hell if it didn't work just put a wad of paper thank you much Cisco!
Thank you!!! It really worked😁😁.
Thanks it work . Going to get new pucks
Hi
Thanks for sharing your experience
I’ve tried it. It did not work☹️
Any suggestions?
Thanks
Dr. Ayman JAWADI that’s too bad. I saw a video once about the chip being warped
But I don’t know how that would get fixed
Thank will try , appreciate your video .
Worked great......thanks for sharing
Nice one mate
So those little silver pieces came off my mom little board and it wouldn't work. Can I just glue those back onto the rubber piece
awsome it worked! all mine were black..lol
thanks. Good tips. But i just turned the battery wrong way but ur video just got me checking things :-)
I love your video Daddy 😍
Dis you tape down the paper or did you make otnwhere it wouldnt move around
YOU A FUCCIN GOAT THIS SHIT WORK
Hi Cisco.
UK based. I drive an S Limited Jeep GC 2010 with this problem. Will this work?
Roy you can give it a shot man. I’m not an expert on models it worked for my key
I tried this but I noticed the car was bugging out. It locked and unlocked the jeep automatically. Anyone else have this issue.
Can I use the Goof Off FG658 Professional Strength Remover, Aerosol 12-Ounce ? thank you
Dude. That’s super specific. Just use a bit you’ll probably be fine. Not 100 on that though
My key beeps but it's not opening the doors
I need my replacement keyfobs programmed? Where, besides the Dealer can I get them programmed?
Robert Underhill never had to do that Robert. Sorry I don’t know.
Some locksmiths can do this
Mine still doesn’t work ugh 😩
Anyone have a issue with ur key when u just swing it around it opens ur door ? Sometimes my door for the inside takes like 3sec to open ?
I had this same issue, where it'd unlock or lock without pressing any buttons. Opened up my FOB and the connectors were covered in black gunk. Cleaned them with rubbing alcohol and works like new now!
People need to go through all this bullshit with that fob just to be able to get in their car and drive?
Sometimes. Really bad quality and design.
Unfortunately does not work for a 2014 Jeep Grand Cherokee. Thanks anyways
Dude you didn’t need 6 minutes and 37 seconds to explain how to clean the contacts