Great vid ram! I have this cube too, and the way even layered cubes work the difference you found the actuator to make is sadly placebo/difference in set up compared to your other mgc. The actuator just sits between the spring and screw and doesn’t actually do anything because there’s no friction between the spring and screw on even layered cubes. Yj has announced a new 3x3 with the actuator, so I’m curious to see how much of a difference it will make on a cube where it might actually be doing what it was designed to do
Thanks! That’s rather unfortunate :( I could’ve sworn that this was faster than other MGC 4x4s I’ve tried. I’m guessing they may have used weaker springs or something in order to create that fast speed? In any case, $32 for this vs $20 for the regular seems a bit ridiculous.
@@RamThakkar they did make the internals primary plastic instead of white plastic, so I’m guessing that’s where most of the difference is. Forgot they did that when I wrote my original comment. Definitely not worth the extra $12, especially when the vin is much better imo
Finally good to see you upload again🎉 I barely practice 4x4 and I don't even have a magnetic one. Should just get the MGC or should I go for the Zhilong mini? Btw love your vids❤
Eyy I'm dropping by after quite a while here. Have always loved your videos, especially the comp vlogs. Also probs will get some other 4x4 after hearing that. I'm a fan of fast cubes but my turning's gotten bit uncontrolled after all this while.
Yooo thanks for dropping by! I have a comp vlog from November that really needs to uploaded lol. Fair enough, I’d guess the vin is better than this from what I heard from other people.
Hello Ram, Can you again make a video on the Gan 12 maglev uv and share your thoughts, because i think the newer batches of Gan 12 has no catching issue and is it worth buying in 2024 :)
Hey! I’ve tried it and it’s probably the best GAN 3x3 atm, so if you really want a GAN 3x3, go for it. However otherwise, you’d be better off getting one of the Moyu releases which are cheaper and a little better in my opinion :)
hey ram, when you say scs sends you the puzzles to test, does that mean you get free cubes or do you pay for it? its something ive always been confused about lol 😅
@@RamThakkarcube names are going crazy now. Like Gan stopped making 12 and 13 pro and called it maglev or leap and now they made a bad cube and made a better one and just called it pro.😬
is this cube uv coated? nice to see another cuber use that oll parity alg lol also for the pll parity, have you considered the inverse? inverse starts with Uw2 while standard starts with r2, for r2 you have to get in M grip(kinda) but for Uw2 you can just straight away start the alg from homegrip
@@RamThakkar for $32 dollars for a yj cube, i expected uv coating smh a additional $13 for that small change in screw area is kinda a lot for me, so i might just get the uv coated vincube
hey guys it's me ram here!!!!!!!
Helo ram
hello everyone Andy here!!!!
LoL
finally ram is back.Good to see him back and nice and informative review as always
Thanks! Have a few more cubes to review and a vlog coming too (hopefully soon lol)
Great vid ram! I have this cube too, and the way even layered cubes work the difference you found the actuator to make is sadly placebo/difference in set up compared to your other mgc. The actuator just sits between the spring and screw and doesn’t actually do anything because there’s no friction between the spring and screw on even layered cubes. Yj has announced a new 3x3 with the actuator, so I’m curious to see how much of a difference it will make on a cube where it might actually be doing what it was designed to do
Thanks! That’s rather unfortunate :( I could’ve sworn that this was faster than other MGC 4x4s I’ve tried. I’m guessing they may have used weaker springs or something in order to create that fast speed?
In any case, $32 for this vs $20 for the regular seems a bit ridiculous.
@@RamThakkar they did make the internals primary plastic instead of white plastic, so I’m guessing that’s where most of the difference is. Forgot they did that when I wrote my original comment. Definitely not worth the extra $12, especially when the vin is much better imo
@@KaiusYoung ohh okay that makes sense. Yeah fair enough, I gotta try the vin sometime haha
Bro please tell me yeing Wang which method using for 2 by2 Ortega or eg ❤
Finally good to see you upload again🎉
I barely practice 4x4 and I don't even have a magnetic one. Should just get the MGC or should I go for the Zhilong mini?
Btw love your vids❤
Thank you so much! Maybe go for the VIN Cube 4x4, from what I've heard it seems like the best.
let's gooooooo!!, he's back!!
Sorta lol
im so happy how cubing names have progressed.
mgc 4x4 then mgc 4x4 super micro actuator. just say enhanced or smth man!
banger vid as always
Eyy I'm dropping by after quite a while here. Have always loved your videos, especially the comp vlogs. Also probs will get some other 4x4 after hearing that. I'm a fan of fast cubes but my turning's gotten bit uncontrolled after all this while.
Yooo thanks for dropping by! I have a comp vlog from November that really needs to uploaded lol.
Fair enough, I’d guess the vin is better than this from what I heard from other people.
Hello Ram, Can you again make a video on the Gan 12 maglev uv and share your thoughts, because i think the newer batches of Gan 12 has no catching issue and is it worth buying in 2024 :)
Hey! I’ve tried it and it’s probably the best GAN 3x3 atm, so if you really want a GAN 3x3, go for it. However otherwise, you’d be better off getting one of the Moyu releases which are cheaper and a little better in my opinion :)
hey ram, when you say scs sends you the puzzles to test, does that mean you get free cubes or do you pay for it? its something ive always been confused about lol 😅
Bro is backkkkkk!!!!!!
I keep going and coming too inconsistent lol
Bro have been waiting for your video
Please post more 2x2 content🙂❣️
:) I have a 2x2 review coming soon and hopefully 2x2 EG tutorial someday.
Lets goo Ram has finally uploaded!!!!!!!!!!!!
No way!!!!
I am very excited to see Ram's review on Vincube 4m ❤🎉😮
Haha it won’t be for a while but hopefully eventually!
@@RamThakkar Ok 👍🏻😁
Great video Ram
oh thanks mom lol
me gustaría que asieras un video acerca del skewb rs es muy bueno y barato te ganaste un nuevo suscriptor 🤩
quizás en el futuro :)
What’s the music you use? Anyways, very cool video!
Thanks! Music is usually in the description :)
A NEW UPLOAD! YES, FINALLY RELIF FROM EXAMS...
Haha good luck for exams!!
Thanks bro @@RamThakkar
@@RamThakkarfunnily enough i got top scores after this...
ugg que increible video as mas como este saludos desde venezuela
muchas gracias y saludos desde nueva zelanda :)
yo ram i love ur vids
question: would u recommend this the normal mgc the vin cube or the qiyi m pro?
Thank you so much! I would think the vin is the best, from what I've heard from some others.
i dont understand the name or the thingy. They couldve just named the cube yj mgc 4x4 speed
Hahah exactly!
@@RamThakkarcube names are going crazy now. Like Gan stopped making 12 and 13 pro and called it maglev or leap and now they made a bad cube and made a better one and just called it pro.😬
RAM POSTED!!!!!!!!!
LOL yes I gotta be more consistent fr
@@RamThakkar lmao, me too.
is this cube uv coated?
nice to see another cuber use that oll parity alg lol
also for the pll parity, have you considered the inverse? inverse starts with Uw2 while standard starts with r2, for r2 you have to get in M grip(kinda) but for Uw2 you can just straight away start the alg from homegrip
Hahah OLL parity gang. Nah actually about the PLL parity, I should look into it. Btw the cube is not UV Coated, it's just standard glossy plastic.
@@RamThakkar for $32 dollars for a yj cube, i expected uv coating smh
a additional $13 for that small change in screw area is kinda a lot for me, so i might just get the uv coated vincube
@@ClockSolverI think the Vin is probably a better choice from what I’m seeing from other people.
Good video yo
Thanks yo
The zelda lofi 🔥🔥🔥🔥
haha stolen from J Perm (rip)
YJ MGC 4x4 Speed-Micro Actuator Version
Kiwi Cuber
i just quit cubing a month ago because i cant get good times and do not have motivation also my family dont support me
sorry to hear that :'(
@@RamThakkari think he is lying just to get attention
@@tamojamoh8550 no bro
@@tamojamoh8550 if i would have to catch attention i would wright it differently and sadly
Well ur 2x2 was good,cant deny that can you?
The name tho 😭
True 😭
Just when i thought gan's naming system was bad