@@ClairesRCs What is that item called you used to secure the wires down to the body and lock or folded the tabs in? Never seen a glue gun that has a straw-like tube.
I guess im asking the wrong place but does someone know of a way to get back into an instagram account..? I somehow forgot the login password. I would appreciate any tricks you can give me
@Kyrie Shiloh I really appreciate your reply. I got to the site through google and Im trying it out atm. Looks like it's gonna take a while so I will get back to you later with my results.
@@ClairesRCs It's easy Claire You can do it also... Just vibrates a lot on your hand but it's not bad and always wear safety Goggles.. The dremel is a very easy way to do it.. much bettet than scissor or the rimmer
Looking sick! I just ordered this kit. The black with red definitely gives me Darth Vader vibes, I only personally wish it was a gloss black instead of matte black
I put in underbody lights on the chassis of my Felony. They're technically still there, 2/3 of them work, but in one pack on asphalt, they got pretty torn up from little debris on the road. I'm glad i only paid $7 for them. Still this Polo kit looks nice for the non-underbody lights. I just don't drive my felony much at night. My cat is a morning person, so i go to bed early 😂 PS: i have the same 2 mil hex driver you used to remove the spoiler. I got it to remove the drive shafts from the diff on my Granite 3s, and it was long enough for the rear, but not the front. So i Dremel'ed off 1-2 cm of the plastic handle and it was long enough! Riveting, i know 😂 I tell the best stories. This one time, i saw a real woodpecker. True story. Can you tell i have no friends? But i have a kitty ! New sub, here. Y'all make a good team, you two. Best wishes from California. 👍🏽
For those Headlights I would drill a small pilot hole then stepper bit it up as large as possible then finish with the dremel. Looks like you made short work of the dremel thougth!!! Bloody nice job!
Claire and Ian buy one of these, Dremel 407 1/2" Drum Sander, it will make jobs like this very easy.. you can drill a rough center hole and then open it up very clean from there. Its an excellent tool for cleaning up wheel wells after using scissors also.
@@ClairesRCs that’s true but the felony and infraction are real works of art and with custom parts like you have on yours it just makes them even better looking all of Arrma’s 1/7 scale on road speedsters look great tbh but yours is looking more and more pretty. I bet the felony makes a great drifter
I love that body and the light are awesome. And this time I am actually just talking about the car! You might run the strip light on the body for ground effects. Nice steady hand Ian.
Claire, I didn't know you had a RUclips channel. Thanks for the vid. I'm getting this car soon and now I'll buy this kit. By the way where's Pat? Hadn't seen him in any Kevin videos lately. God bless
That dermal bit works pretty good perhaps a body reamer would be just as effective for all the round holes but for everything else vents and such definitely will pick one up👍
Thanks for your brilliant workmanship I paid a hobby shop to install the same lights & they butchered my body my two year old grandson could’ve done a better job ❤❤❤❤
Dremel has been a blessing for us. Thank the lord something finally went right. Great job guys. Looks amazing. #CRCU looks pretty good to...also, the hot glue works great and shoe goo of course! Shie goo for everything except shoes..but here, even shoes..Curiosity and all!😂
I think that kit looks sweet , but I’m not to sure about those green marker lights, but other then that it’s definitely a thumbs up. Great job guys lol and by saying guys I’m meaning Ian. Lol just kidding Claire as we know it’s not a channel without you !! Stay and Play Safe !! 👊✌️
Lol I was going reply to Claire’s message and say that Ian should consider changing them out to orange, or white since it’s the fog light or blinker spot , but then I changed my mind because she said you guys weren’t keen on the green either, but the reason you had them is because you never noticed on the listing that you could pick your colour ,so I thought Ian’s probably already thinking he’ll change them out so no bother messaging them again, and then I noticed your message, lol Great minds think alike. I think red would go really good as well. Anyway whatever you change them out for will look awesome on it anyway as the kit already looks sweet on it. Stay and Play Safe !! 👊✌️
Clare I just got my light kit the full one from polo creations but what dremel and tip did you use as my one is small and under powered. lol thats what she said lol.. seriously though i need to buy a better dremel then the small one i have as the cutting is not as easy as that video
How long did you wait? I've orderd 3 sets. Kraton6s, TLR TYPHOON and my Infraction....it's going to be EPIC... LOL, Tell Kevin his waffling is getting old...the old Kevin talbot was wayy better. I'm glad I found your videos.
The usual 10 days. I really wouldn’t recommend them for a basher though! They are a weak 3D print. Have barely lasted in the felony. Look epic but let us down ☹️
Great tutorial. I got my light kit from Polo Creations for my limitless. Would you happen to have a tutorial for fitting that light kit? If not, can you point me in the right direction? Thank you! And a great, great video 😀
Sorry, this is the best we could come up with, we couldn’t find a tutorial. To be honest we are starting to wish we hadn’t bought it after cutting the body! It’s not the best, poor quality 3D printing, will shatter at the slightest knock ☹️
Clare and guys.. I need some help.. I connected all the lights up etc and when i turn it on the simply flash off and on off and on like every second. I have tried different channels on the receiver and yeah still no go. Any advice. Thanks
We managed to get out during the day but with the bashers but didn’t fancy ruining the felony! This weekend hopefully 👍🏼 although it’s forecast more snow 🤣
Great lights they look brilliant
Not as pretty as the carbon though 😍
@@ClairesRCs What is that item called you used to secure the wires down to the body and lock or folded the tabs in? Never seen a glue gun that has a straw-like tube.
I guess im asking the wrong place but does someone know of a way to get back into an instagram account..?
I somehow forgot the login password. I would appreciate any tricks you can give me
@Dariel Hayes instablaster =)
@Kyrie Shiloh I really appreciate your reply. I got to the site through google and Im trying it out atm.
Looks like it's gonna take a while so I will get back to you later with my results.
THANK YOU THANK YOU! Just picked up my Felony yesterday and I'm so excited to run this thing, esp at night with these lights!
Love it. I'm popping lights on my rustler this weekend. Traxxas kit plus the strip lights for extra flex.
Awesome! Don’t think we would put any on our bashers but they do look good
haha stemp the rest of it! looks epic, and that tool works a treat!
I quite fancy a go with the tool thing 🤣
@@ClairesRCs thats what she said
Good tip on the Dremel Bits for cutting... That is what I use also.. So much easier.. a little loud but easier..
I think he should let me have a go! 😂
@@ClairesRCs It's easy Claire You can do it also... Just vibrates a lot on your hand but it's not bad and always wear safety Goggles.. The dremel is a very easy way to do it.. much bettet than scissor or the rimmer
Claire is so cool, everyone should hope their lives cross paths with a woman like claire
Nice Seeing the Ladys into RC
I have one for my typhon and its really nice
Awesome, really sets it off!
Looking sick! I just ordered this kit. The black with red definitely gives me Darth Vader vibes, I only personally wish it was a gloss black instead of matte black
Looking good. Great wrenching video. Keep em coming.
Will do, thanks for watching 🙂
Wow. Now that is sick! Great job guys!
Thankyou 🙂
Awesome video! Thank you!
you have a very steady hand sir. well done
Considering he’s usually like a baby elephant!
I put in underbody lights on the chassis of my Felony. They're technically still there, 2/3 of them work, but in one pack on asphalt, they got pretty torn up from little debris on the road.
I'm glad i only paid $7 for them.
Still this Polo kit looks nice for the non-underbody lights.
I just don't drive my felony much at night. My cat is a morning person, so i go to bed early 😂
PS: i have the same 2 mil hex driver you used to remove the spoiler. I got it to remove the drive shafts from the diff on my Granite 3s, and it was long enough for the rear, but not the front. So i Dremel'ed off 1-2 cm of the plastic handle and it was long enough!
Riveting, i know 😂
I tell the best stories.
This one time, i saw a real woodpecker. True story.
Can you tell i have no friends?
But i have a kitty !
New sub, here.
Y'all make a good team, you two.
Best wishes from California. 👍🏽
People who dislike the video means they don't have a good RC car then the people that liked
Thank you for the great and great video and good information.
Have a healthy day. 😁
You too. Thanks for watching 👍🏼
Great video, nice camera and editing work!
Pat on the back for me then 🙂
Amazing. She looks great
Thanks for watching 🙂
That felony is looking awesome!! 👍👍
I’m looking forward to seeing it run at night! 🔥
@@ClairesRCs man that's going to look good🤤
Wow they look amazing, and Ian did a fantastic job of fitting them as always, hope your both keeping safe and are well
Thankyou superstar! Love to you all 🙂
Thats the best light kit ever
Really looks the part! Just need to work out where to put the strip lights! 🔥
For those Headlights I would drill a small pilot hole then stepper bit it up as large as possible then finish with the dremel. Looks like you made short work of the dremel thougth!!! Bloody nice job!
When in doubt, LED it out. Looks great guys !! Cheers, and stay safe.
Very nice 👌 Well done 👏
Amazing like always :)
Claire and Ian buy one of these, Dremel 407 1/2" Drum Sander, it will make jobs like this very easy.. you can drill a rough center hole and then open it up very clean from there. Its an excellent tool for cleaning up wheel wells after using scissors also.
Thankyou for the tip 👍🏼
Love it!
that's sick!! nice Dremel work btw...I love using mine on my bodys & wings.
Looks great doesn’t it!!? Think I should have a go with the dremel... Ian won’t mind surely 🤫
Yea that looks awesome, nice work as well. Very tidy 😁😁👍👍👏👏
First time anyone’s called Ian tidy 🤣 messy git!
@@ClairesRCs I think he likes that felony, seems to treat it very differently 🤣🤣🥰🥰
Can't hip but coming to see my claire
That looks awesome guys good job with the dremal Ian the car look really guy looking forward to seeing it ripping around in the dark
So are we! It started snowing Sunday so we didn’t get to run it! Did go out for a bash though ❄️
those strip lights equals fire x
Outstanding video the car looks really really good.
Thankyou 🙂 didn’t expect this one to be very popular 🤷♀️ shows what I know!
@@ClairesRCs Your welcome.
Crud, I haven't even received my Felony yet, and now I NEED these lights...
I think Ian NEEDED them before he decided between felony or infraction too 🤣
The felony looks sick!!
One of my favorite
Can’t wait to run it!
Very cool guys. I think I’ll do it to mine now! Thanks for doing that. You guys are great.
No worries. We couldn’t find a decent video showing them, hope it’s helped 👍🏼
I was looking at this light kit for my felony and came across this video. It was exactly what I was looking for. Good stuff, liked and subscribed.
Thankyou and welcome 😊
Pretty sweet light kit 💪🏾💯
Awesome 👍🕶👍
Very nice work there they look great proper aggressive look to the felony now which suits the name perfectly lol
Just a shame we are limited to where abs when we can run it. Mind you, saves on tyres 🤣
@@ClairesRCs that’s true but the felony and infraction are real works of art and with custom parts like you have on yours it just makes them even better looking all of Arrma’s 1/7 scale on road speedsters look great tbh but yours is looking more and more pretty. I bet the felony makes a great drifter
Sweet set up y'all.
Thankyou 🙂
I need one off those in my life 😁
Awesome awesome car!
Looks great
Thankyou 🙂
Looks great you all are the best . I am a new fan . So keep on making videos tell Kevin his biggest fan said hello . Love you all
Hello and welcome Kenneth 🙂 thanks for the sub 👍🏼
I love that body and the light are awesome. And this time I am actually just talking about the car! You might run the strip light on the body for ground effects. Nice steady hand Ian.
Wow you have done a great job
Ian! I’m an excellent supervisor 🤣
Great cut Dude..!!!
Looks awesome
Agree!
cool light kit
Thankyou 🙂
That looks absolutely EPIC 👍 good job with the Dremel. Hope you guys are doing well. 💋😘😘
All good Kimberley 😘 loads is love ❤️
Claire, I didn't know you had a RUclips channel. Thanks for the vid. I'm getting this car soon and now I'll buy this kit. By the way where's Pat? Hadn't seen him in any Kevin videos lately. God bless
Gonna look awesome but, ya gotta add those strip lights someway. 👍🏻👍🏻👍🏻💡
Yeah I really want to find a way too 👍🏼
Great video love the lights I’m going to do mine ! Nice work Ian , subbed !
Awesome. Thankyou 👍🏼
wow those lights look absolutely epic as kev would say ha ha 😂😃🚗👍🏻
And for once I would agree with him 🤣
@@ClairesRCs 😂👍🏻
Very Dope!🔥 Makes me want a Felony 🤣
We ran it again tonight with a tyre mod, awesome car 🔥
Nice job 👍
Thanks for watching 🙂
Turned out great! The rear looks evil and fits the felony perfect!
Very cool
Thankyou 👍🏼
I have subscribed to your channel
Looks wicked!😈
They look great, can’t wait to run them! Weather has been rubbish!
Great work to the felony my next speed demon.👍🔥✌
Good choice. There’s a lot of infractions about but not so many felonies 👍🏼
That dermal bit works pretty good perhaps a body reamer would be just as effective for all the round holes but for everything else vents and such definitely will pick one up👍
No body reamer didn’t work as well, the shell was very brittle where the small round lights went 😕
That looks mint
Helpfully will look as good running. Not had a chance to see yet!
NICE!!!!
Great vid keep up the good work
Will do 👍🏼
Nice video
Thankyou 😊
Do you have any tips for a new rc youtuber
Thanks for your brilliant workmanship I paid a hobby shop to install the same lights & they butchered my body my two year old grandson could’ve done a better job ❤❤❤❤
nice video 👍
Nice.!!
Thanks for watching 🙂
Hi from daytona beach fla. We love y'all
Dremel has been a blessing for us. Thank the lord something finally went right. Great job guys. Looks amazing. #CRCU looks pretty good to...also, the hot glue works great and shoe goo of course! Shie goo for everything except shoes..but here, even shoes..Curiosity and all!😂
Nice video I actually liked the tail wing looks so cool with it. where did you buy that?
Great video guys, you both did a really good job drilling and mounting the lights. It looks kind of Evil.
Sweet light kit, the Felony looks sick.
Thankyou, for your comment too 🙂
I think that kit looks sweet , but I’m not to sure about those green marker lights, but other then that it’s definitely a thumbs up. Great job guys lol and by saying guys I’m meaning Ian. Lol just kidding Claire as we know it’s not a channel without you !! Stay and Play Safe !! 👊✌️
Yeah we agree with the green. Had Ian of read the description properly he would have seen you could choose your colour 🤦🏽♀️
Yeah I might change the marker lights for red ones 🤔
Lol I was going reply to Claire’s message and say that Ian should consider changing them out to orange, or white since it’s the fog light or blinker spot , but then I changed my mind because she said you guys weren’t keen on the green either, but the reason you had them is because you never noticed on the listing that you could pick your colour ,so I thought Ian’s probably already thinking he’ll change them out so no bother messaging them again, and then I noticed your message, lol Great minds think alike. I think red would go really good as well. Anyway whatever you change them out for will look awesome on it anyway as the kit already looks sweet on it. Stay and Play Safe !! 👊✌️
Ima get mine soon
You will love it! 🔥
I’m a new subscriber I have seen you on Kevin’s channel but that’s it
Hello and welcome. Plenty to see here 🙂
Nice. I got the Bluetooth setup
Awesome, really makes them stand out!
@@ClairesRCs def
Did all the lights come together as a kit with the remote or did you get them separately, and where did you find them?
Clare I just got my light kit the full one from polo creations but what dremel and tip did you use as my one is small and under powered. lol thats what she said lol.. seriously though i need to buy a better dremel then the small one i have as the cutting is not as easy as that video
How long did you wait? I've orderd 3 sets. Kraton6s, TLR TYPHOON and my Infraction....it's going to be EPIC...
LOL, Tell Kevin his waffling is getting old...the old Kevin talbot was wayy better.
I'm glad I found your videos.
The usual 10 days. I really wouldn’t recommend them for a basher though! They are a weak 3D print. Have barely lasted in the felony. Look epic but let us down ☹️
Great tutorial. I got my light kit from Polo Creations for my limitless. Would you happen to have a tutorial for fitting that light kit? If not, can you point me in the right direction? Thank you! And a great, great video 😀
Sorry, this is the best we could come up with, we couldn’t find a tutorial. To be honest we are starting to wish we hadn’t bought it after cutting the body! It’s not the best, poor quality 3D printing, will shatter at the slightest knock ☹️
Clare and guys.. I need some help.. I connected all the lights up etc and when i turn it on the simply flash off and on off and on like every second. I have tried different channels on the receiver and yeah still no go. Any advice. Thanks
Nice car and great light show. What are lamp housings, 3D printed?
Yeah I think so 🤔
Very close to 10k subs ❤️
Won’t be long 🔥
@@ClairesRCs hope your all well ❤️sending hugs😘😘
Hello where u got ur cables clips
That looks totally bad ass.
Good buy I think. Hope we can use the strip lights too, seems a shame not to!
I’m sure the infraction front lights are the same shape Paul 😉
@@mrclairesrcs3290 Reckon your right pal. Yours looks sick.
@@FullOnRC thank you mate. I wanted the lights to look stock and they do 👍. Just need the better weather and you guys can join us for some drifting
Hey Claire can you do an install video on the turbos
Love video but how about some AC/DC or Stones next time 😀
I wish! Copyright wouldn’t allow!
Well now that I know they are 3d printed i'll just make my own LOL. Wiring LEDs are easy.
Bonjour ou trouver les arrières sont cool
Hi could I get some advice on getting a new rc under £150 what’s the best rc in that price range btw love the vids
Honestly I would keep on saving. There really isn’t a lot out there that won’t just cause you grief and disappointment for that price 😬
@@ClairesRCs thanks for the advice great vids btw
even the smell off a brand new RC will not tell you the truth. x love
300th like!
Whoa!!
@@ClairesRCs :)
I subbed. Kev sent me.
Thankyou and welcome 🙂
Your so knowledgeable on these rcs great to see you using and running these beast of machines! Hot chicks with rcs! Oh ya!!
👍👍👍 can you connect it to your controller 🖖🖖
No this kit I don’t think.
First 😉
Jesus seb! I had only just hit publish 🤣
Well done seb that was quick
@@ClairesRCs lol
Shows you how bored I am
Hello I’m back
What song was it at 7:25
It’s called Headlights by Sven Karlsson 👍🏼
@@ClairesRCs ok thanks I had a feeling it would be along the lines of something headlights 🙂
✌🏻😎🏴wait, come back. You didn’t take it outside to play in the dark 😔
I know gutted 😞 but this strange white stuff was falling from the sky! Quite a lot of it! ❄️
@@ClairesRCs that’s lucky. We had snow but then we had rain. I didn’t get to play much either
We managed to get out during the day but with the bashers but didn’t fancy ruining the felony! This weekend hopefully 👍🏼 although it’s forecast more snow 🤣