Great to see how it got to be, just got mine after waiting for it a long time. So worth the wait! I love it already and look forward to take it out for its first spin. Also look forward to experiment fun yummy things to cook in it! Thank you to all involved to make this happen!🙂👍
Thank you so much mate. Was a long and rocky path from here and I really appreciate the support from all of you who triggered it and made it happen. Thank you very much. ATB Stripey
Verry Well done Stripey.........i asked the guy who makes the Vesuv if he can make a 2 part windshield that fits inside a Toaks 700 mug and sent him a video of the Storming Norman . He said he would look into it but he never got around to it. You are filling a much needed gap in the market and i personally am really looking forward to being able to buy one :)
Thank you very much! The reason I started the whole project was actually the reason that I couldn’t find any ultralight, high efficient alcohol cone which would fit into my pot. As you mentioned there are some cones out there but they are either not nesting in the pot or they have in my eyes some massive design flaws not just regarding the efficiency. It makes me questioning if the companies actually used the cones themselves 😂 Hopefully I can get the other open points sorted shortly that we can start with kickstarter soon. I will post a proper video to the cone before the campaign starts - thanks a lot Stripey
@StripeyHatGuy you're welcome Stripey. The most effective burner/ windshield combo i have come up with is to use thr Trangia gel burner with some heat resistant felt inside and a vesuv 600 windshield and Evernew 600 pot. Maybe using the trangia gel burner this way would be best for your 700 featherlight system because it gives out a lot of heat so it should be a very good combination 👍 👌
@@Olan... interesting solution you did. In the Featherlight 700 case I can say that the output of the trangia is too high. It boils quicker but needs much more fuel than the we kojin style stove.
OK I understand but when i said Trangia i didn't mean the regular Trangia alcohol burner i meant the silver gel burner pot but with some felt inside to make it spill proof and you can use the lid to put out the flame although you have to use all the fuel that you pour because the gel burner pot isn't a good seal when the lid is on.@@StripeyHatGuy
Stunning stove option and I’d love to own one. Congratulations on your product. As a freelance designer I know the hard work and research it takes to get a product fully realised and ready for the market. 🎉🎉
Thank you so much- the best feedback ever ☺️. I will do a proper video about the cone and its properties as soon as we are closer to the kickstarter campaign.
Excellent 👌 many successful businesses have come about this way ... " I can't find what I want as nobody makes it !" Whereas most of us just accept and look for an alternative , the successful ones have the gumption to say "right I will make (get it made) it myself " , and knowing that there must be other people seeking the same. I wish you every success and I am ready to place my order .
Now this is an idea I'm very intrigued about and looking forward to seeing the Kickstarter go live. This would seems like a welcome addition into any hikers mug.
Thank you very much Brian! Need to admit that I am quite surprised by all the positive feedback as I considered it as a highly niched product. Anyway I try to sort the other next big issues and then we have a look what happens 😎👍
Fantastic. I have a cone I had imported all the way from Brazil. OMA Gear. It’s seen better days and I need a new one. Yours looks a big improvement on the one I have. It looks to connect together much easier without any gromits. I shall be buying one once you start selling. All the very best 👍
Just up to speed on the Featherlite 700. Commented previously in aware of your success, when will we be able to get our hands on one❤ well done my friend:
Hi Serk 👋, Hahaha sometimes less is more buddy. First I need to do my homework and than we will see if we are even enough people who are interested in the FeatherLight 700 that it is economically possible to produce them 😎 Thank you very much! ATB Stripey
Hi Stripey. It’s an exciting project and the journey makes it all worth while. I think people in the UK would prefer to and find it more cost effective buying the cone here than from abroad. Your excitement for the project by the way is great to see
Great stuff and its an amazing feeling when you come up with an idea and see it come to life. As an engineer myself I have created a few things over the years and as such wish you all the best with your venture.
Thank you very much Ray much appreciated! Yeah is an absolutely great feeling, I need to admit that I miss quite the German automotive infrastructure for projects like this 😂😂😂
Thank you very much Gary! Yeah not sure if it will ever be a 'product' in the traditional way. I am at the moment just planing on a kickstarter and how?if I proceed from there I will see. I will explain why I choose kickstarter and much more in a later video when I am all set for kickstarter. Cheers Stripey
Great video Herr Stripey I love your videos and I’m in awe of the amount of work they must be Brilliant stove I hope it does well Now maybe you could think of some clever designs for cookware to make a whole lightweight cooking system
Thank you very much! I will do a dedicated video as soon as the kickstarter is going to start - also I think it would be interesting to see for you how easy it is to set-up, multiple use cases (pot vs. frying pan set-up), putting it together, efficiency test in comparison to other UL solutions as well as maximum load capacity before the cone collapses ;-) Cheers Stripey
Oh ye that's a well cool idea, be careful with comparisons though, I don't know where you would stand with that if you end up a competitor, thinking you might have to be independent, worth checking first fella. I'd also like to say, yourself and a few others like bushman and blue are my fav to watch on RUclips because you really challenge yourselves and your kit that why I know this stove will be the bomb 🤟@@StripeyHatGuy
Thank you very much, was actually never thinking into this direction - good point! Have already some ideas written down but I am also not sure if it would fit onto this channel tbh. as this is in the very moment just a kickstarter not more not less which was triggered by the community. A lot to things to think about but most importantly I need to do now the rest of my homework 😉
That is nice to hear 😊. Difficult to say tbh. I want to have everything in place before I start, I am not one who wants to offer something with a lot of question marks, probably not really the kickstarter nature of things but that is just me. I try do be as quick as it goes as I know that the season starts, people saw it,…. I have still plenty of homework imho to do! I know that this is not the answer you were looking for but I really want to make it proper - two major points are material supply and the other one is ‘marketing’ things for Kickstarter to reach a bigger audience as a production of only a few FeatherLight 700 is economically not possible with manufacturing in Scotland. Ideally we would find like a few hundred people who would like to have one 😅
@@StripeyHatGuy I totally understand. Well, whichever way you go. I’d like to put my name down for one when you decide which route you’d like to take. An awesome product from an awesome guy.
Thanks a lot! Initially only a FeatherLight 700 is planned as it is the most efficient combination - but it means not that no other pot sizes are coming in the future. Cheers Stripey
Sorry mate I don’t want to go on about it but you will get the support of all your subscribers, and we will def share it on our channel. Fingers crossed for you mate 🤞ATB Donny and Maxine
Well done Stripey...excellent work 👍I want to order a cone from your Kickstarted page but need a burner but not the Toaks pot as I already have one. I can only see options for a full cook set or cone only, so is there any way I can pre-order a cone and burner?
Hi Adam, Oh man we haven’t been thinking of that combination- sorry for that. Can you please write me an email, we will find a solution for that 👍 ATB Stripey
It is on my channel in the about section. I do not want to send the email here because of bots. Alternatively you can give me a ping on Instagram in the case you have it.
Hi Stripey, I have a Vesuv cone and it’s really efficient but the press stud fastening deforms the material on opening! I’ve made a few myself out of 0.1mm titanium but neat cutting is not really possible. Since the Stormin comes can no longer be obtained and the Caldera items have to come from the USA I’d have thought there’ll be a big market for it in the uk. Are you also going to produce a puck burner to go with it? I use my vesuv with a 600ml Evernew pan, so when your production is up and running you can put me down for an order! Great Stuff Thanks.
Thanks a lot Nick! Yes I will provide the stove with it for the highest efficiency possible - I will explain how and why this is the case in a later video closer to the start of kickstarter but in short the whole cone layout is calculated and for a reduction of variables I used the ‘stove’ surface and height as fixed. (I have a video on the stove on my channel). This is also the reason why the FeatherLight 700 has its highest efficiency with the Toaks 700 pot. Of course you could use a pot with the same diameter but other measurements would be probably off and the efficiency would be lower. Cheers Stripey
Nice to hear, initially I will do only a Featherlight 700 as it is the most efficient combination - which means not that no other pot sizes are considered for future projects. Cheers Stripey
@richardwaudby7338 no worries! The FeatherLight 700 will be for the Toaks 700ml long handle, or other pots with the same measurements. I already implied in the name with 700 that other sizes might follow in the future but I want to first finish one kickstarter and then I need to have a look if/how I will proceed.
Jepp that is right! In Germany we use like 1.4xxx but I still think that most comes from Asia/India. Thankfully the material sourcing is sorted ;-) Thanks Stripey
Super awesome project! Do you plan to make different sizes? I mostly use a toaks 550ml light and currently use an X-Boil UL it works really well but a cone design is more efficient so I can't wait to see if you're able release a finished product soon :)
In the very beginning it is only a FeatherLight 700 planned as it is the most efficient combination! What the future brings I am not sure, but say me like this - if enough people need a cone for 550ml I am sure we can sort something out. Cheers Stripey
Thanks a lot! we will start a kickstarter campaign very soon - if you want to get notified when we start you can enter your email address on our website and we will notify you. No strings attached! I posted the website link in my community post. Cheers Stripey
Thank you very much! Regarding the time frame it is really difficult and I would rather not say 4 weeks, 8 weeks or even 12 weeks as people would get understandable disappointed if I couldn’t hold my word. I can only say that the initial plan was that everything would be already available and that right now we are checking roughly for the demand to get an idea how many pieces need to get produced that we don’t get any delay with shipping it straight after the campaign. Sorry for not being more helpful here… ATB Stripey
With all the nice comments and people waiting to buy one I guess you will be sleeping with those eyes tonight 🤑🤑🤑 , 😂 Nice job Stripey , best luck with your project
Very well done Stripey! Looks an amazing product for the serious wild/back packer. Once you've got some product you can shlep it around the youtube boys and girls who have big numbers, and will, i have absolutely no doubt will give it rave reviews, mate! Oh, run a competition to name this piece of kit, I'll start. "The Stripey Cone !"....... yeah i know, not likely a winner😅 Sorry Stripey, I see you have a product name!
Thank you very much! Yeah this might be an option, not sure so if this is the aim of it. I personally don't trust 'Review RUclipsrs' which review gear they have only used once for 10 min, 1 day, 1 week. ATB Stripey
Agreed, Stripey. There are a few genuine/ trusted ones, I suppose you would need to know them personally or have to come from a very very trusted source. There are a few 'gold standard' ones out there in my humble option👍
Hi folks,
if you want to support the FeatherLight 700 or my channel even more ... please consider my patreon.com/StripeyHatGuy
Thanks a lot,
Stripey
Did you consider a crowdfunding - pre ordering essentially
So pleased for you Stripey. Like a proud father with a newborn heading home from the hospital.
Hahaha, yeah kind of 😂
Great to see how it got to be, just got mine after waiting for it a long time. So worth the wait! I love it already and look forward to take it out for its first spin. Also look forward to experiment fun yummy things to cook in it! Thank you to all involved to make this happen!🙂👍
Thank you so much mate. Was a long and rocky path from here and I really appreciate the support from all of you who triggered it and made it happen. Thank you very much. ATB Stripey
Verry Well done Stripey.........i asked the guy who makes the Vesuv if he can make a 2 part windshield that fits inside a Toaks 700 mug and sent him a video of the Storming Norman . He said he would look into it but he never got around to it. You are filling a much needed gap in the market and i personally am really looking forward to being able to buy one :)
Thank you very much! The reason I started the whole project was actually the reason that I couldn’t find any ultralight, high efficient alcohol cone which would fit into my pot. As you mentioned there are some cones out there but they are either not nesting in the pot or they have in my eyes some massive design flaws not just regarding the efficiency. It makes me questioning if the companies actually used the cones themselves 😂
Hopefully I can get the other open points sorted shortly that we can start with kickstarter soon. I will post a proper video to the cone before the campaign starts - thanks a lot
Stripey
@StripeyHatGuy you're welcome Stripey. The most effective burner/ windshield combo i have come up with is to use thr Trangia gel burner with some heat resistant felt inside and a vesuv 600 windshield and Evernew 600 pot. Maybe using the trangia gel burner this way would be best for your 700 featherlight system because it gives out a lot of heat so it should be a very good combination 👍 👌
@@Olan... interesting solution you did. In the Featherlight 700 case I can say that the output of the trangia is too high. It boils quicker but needs much more fuel than the we kojin style stove.
OK I understand but when i said Trangia i didn't mean the regular Trangia alcohol burner i meant the silver gel burner pot but with some felt inside to make it spill proof and you can use the lid to put out the flame although you have to use all the fuel that you pour because the gel burner pot isn't a good seal when the lid is on.@@StripeyHatGuy
Ah ok, actually I don't know this one - interesting 👍
Brilliant. From idea, to design, to actual product. Well done Stripey. Now to source the material. Keep going, it always works out.
Thank you very much! Yeah was quite a journey so far, probably the second time easier unfortunately I am still in the middle of the first one 😂
Stunning stove option and I’d love to own one. Congratulations on your product. As a freelance designer I know the hard work and research it takes to get a product fully realised and ready for the market. 🎉🎉
Superb Stripey! Your smile as you came out with it in your hand was brilliant! Hopefully it all goes well for you. Cheers
Thank you very much! Fingers crossed that I am not the only one who needed an ultralight cone 😂😂😂
@@StripeyHatGuy think I’ll be in the market for one soon, so will keep an eye on your progress. Cheers
Stripey, I am very glad that we at JetCut could help you out. Good luck with the product and if you want anything else cut give us a shout.
I will, once more thanks a lot!
Just what I've been looking for... Will def support you on kick-start... Best of luck with your venture 👍
Thank you so much- the best feedback ever ☺️. I will do a proper video about the cone and its properties as soon as we are closer to the kickstarter campaign.
Excellent 👌 many successful businesses have come about this way ... " I can't find what I want as nobody makes it !" Whereas most of us just accept and look for an alternative , the successful ones have the gumption to say "right I will make (get it made) it myself " , and knowing that there must be other people seeking the same. I wish you every success and I am ready to place my order .
Thank you so much!
I'm sure there will be a lot wanting 1 of those👍
Would be nice as it would reduce the costs for all of us!
Cheers
Stripey
Now this is an idea I'm very intrigued about and looking forward to seeing the Kickstarter go live. This would seems like a welcome addition into any hikers mug.
Thank you very much Brian! Need to admit that I am quite surprised by all the positive feedback as I considered it as a highly niched product. Anyway I try to sort the other next big issues and then we have a look what happens 😎👍
Fantastic update buddy so pleased for you. It looks amazing and can’t wait to try one. Kickstarter incoming 😊
Thank you so much Craig! Aye, A few more things to sort but it is getting close 😊
Well done! The look on your face 😀 was worth a thousand words!
Thanks a lot! Just so nice when something turns after such a long time finally out as I wanted it- still smilling 😊
Just watched your most recent video and saw you using your stove and that is very useful, then found myself here sharing your joy! Very good
Thank you very much😎
Fantastic. I have a cone I had imported all the way from Brazil. OMA Gear. It’s seen better days and I need a new one. Yours looks a big improvement on the one I have. It looks to connect together much easier without any gromits. I shall be buying one once you start selling. All the very best 👍
Thank you very much! Yeah I mean everybody says this about his stuff I am not different - it is exactly how I imagined it 2 years ago, just perfect 😂
Well done Stripey . Looks great and looking forward to seeing it in action
Cheers Dave, I don’t expect any surprises as I used the hand made version for nearly 2 years 🙌👍
Just up to speed on the Featherlite 700. Commented previously in aware of your success, when will we be able to get our hands on one❤ well done my friend:
Thank you very much! I will soon make an update 😎👍
Excellent Stripey ! Great to see your hardwork put into practice
Thanks a lot mate! Hopefully soon it will be all ready 👍
Hi Stripey 👋. This is great, this time next year you’ll be a millionaire and a pillar of the hiking community 😅. Serk
Hi Serk 👋,
Hahaha sometimes less is more buddy. First I need to do my homework and than we will see if we are even enough people who are interested in the FeatherLight 700 that it is economically possible to produce them 😎
Thank you very much!
ATB Stripey
Hi Stripey. It’s an exciting project and the journey makes it all worth while. I think people in the UK would prefer to and find it more cost effective buying the cone here than from abroad. Your excitement for the project by the way is great to see
Fantastic Stripey 🙌🙌🙌 respect for your dedication
Thanks a lot MaliceGLA! Feels always good to see a 'baby' grow up 😂😊
Well done Stripey, I really hope this venture takes off for you..
Thanks a lot Philip!
Great stuff and its an amazing feeling when you come up with an idea and see it come to life. As an engineer myself I have created a few things over the years and as such wish you all the best with your venture.
Thank you very much Ray much appreciated! Yeah is an absolutely great feeling, I need to admit that I miss quite the German automotive infrastructure for projects like this 😂😂😂
I think you're going to have a waiting list for this new product. Just what I'm looking for. We'll done ✔️
Thank you very much Gary! Yeah not sure if it will ever be a 'product' in the traditional way. I am at the moment just planing on a kickstarter and how?if I proceed from there I will see. I will explain why I choose kickstarter and much more in a later video when I am all set for kickstarter.
Cheers
Stripey
It looks excellent , good luck. I'm definitely interested in purchasing one .
Thank you very much! Can't wait to start Kickstarter but I do still have a lot of 'homework' todo 😎👍
That’s really incredible
A massive well done to you and I look forward to buying one.
ATB. 🥳👍🥇
Thank you very much Dave much appreciated!
Great video Herr Stripey
I love your videos and I’m in awe of the amount of work they must be
Brilliant stove I hope it does well
Now maybe you could think of some clever designs for cookware to make a whole lightweight cooking system
Thank you very much! Have quite a few other ideas but first I need to do my homework on this one and then…well we will see 😂
Thanks a lot
Stripey
Brilliant stripey... Cracking little cone setup... You have made a superior cone to the stormin norman.. 🎉👏👏
Thank you very much! I hope so 😅😊
Outstanding Stripey lad, brilliant watch - thanks!
Thank you very much 😊
Congratulations - how exciting !
Thank you very much! Not there yet but much closer than it was last week or the week before 😂😂😂
Brillaint Stripey, hopefully you will have it in the shops very soon! Thanks for sharing mate, all the best, Dave.
Wasn't really planning on it Dave. I see it at the moment as a kickstarter project - so no shops 😉
Brilliant Stripey, well done.
Thanks a lot mate!😊
Great news Stripey, can't wait to get mine!
Thanks a lot mate! I do my best, the material situation in the UK is unfortunately not in our favour but I am on it 👍
Excellent work, as I promised, I’m now in the highlights for three months. Maybe we meet for a coffee and a chat…😊
Thanks a lot! Wish you a wonderful time in Scotland - good chances that we will meet in the hills - Scotland is a surprisingly small place 😂👍
Should of watched it all the way through before commenting. Ill keep an eye out for the Kickstarter looks great 🎉 and congratulations
Thank you very much! I will do a dedicated video as soon as the kickstarter is going to start - also I think it would be interesting to see for you how easy it is to set-up, multiple use cases (pot vs. frying pan set-up), putting it together, efficiency test in comparison to other UL solutions as well as maximum load capacity before the cone collapses ;-)
Cheers
Stripey
Oh ye that's a well cool idea, be careful with comparisons though, I don't know where you would stand with that if you end up a competitor, thinking you might have to be independent, worth checking first fella. I'd also like to say, yourself and a few others like bushman and blue are my fav to watch on RUclips because you really challenge yourselves and your kit that why I know this stove will be the bomb 🤟@@StripeyHatGuy
Thank you very much, was actually never thinking into this direction - good point! Have already some ideas written down but I am also not sure if it would fit onto this channel tbh. as this is in the very moment just a kickstarter not more not less which was triggered by the community. A lot to things to think about but most importantly I need to do now the rest of my homework 😉
I'll be up for having one of them too Stripey!! Good luck.
Oh wow thank you so much! I will make a video where I will proper show the FeatherLight 700 when the kickstarter is ready - thanks a lot
From Egypt with love
hi 👋
Nice, king regards from Belgium.
Thank you very much!
This is what we’ve been waiting for. Would love to support this on kickstarter when do you think you might list it ?
That is nice to hear 😊. Difficult to say tbh. I want to have everything in place before I start, I am not one who wants to offer something with a lot of question marks, probably not really the kickstarter nature of things but that is just me.
I try do be as quick as it goes as I know that the season starts, people saw it,…. I have still plenty of homework imho to do!
I know that this is not the answer you were looking for but I really want to make it proper - two major points are material supply and the other one is ‘marketing’ things for Kickstarter to reach a bigger audience as a production of only a few FeatherLight 700 is economically not possible with manufacturing in Scotland. Ideally we would find like a few hundred people who would like to have one 😅
@@StripeyHatGuy I totally understand. Well, whichever way you go. I’d like to put my name down for one when you decide which route you’d like to take. An awesome product from an awesome guy.
Thank you very much!
Nice one. I’ll have one of those for sure.
Thank you so much, glad to hear 😊
Very cool idea. What material should it be made, what is the best alloy for this?
Awesome stuff, love it!!!
Thank you very much Jim!
Amazing mate. So happy for you! My company uses a laser for cutting metal, however we cut 15mm steel so maybe not considered ultralight 😂
Thank you very much! Hahaha yeah most companies can’t do less than 5mm - not ultralight but for sure even more stable😂😂😂
That looks the business Stripey 🔥
Thank you very much Robin! 🙌👍
Looks great ! Look forward to ordering one ( would love a smaller size for 550ml )
Thanks a lot! Initially only a FeatherLight 700 is planned as it is the most efficient combination - but it means not that no other pot sizes are coming in the future.
Cheers
Stripey
Absolutely amazing!! What an amazing project. You should be very proud mate :)
Thanks a lot! Celebration time is when everyone has a cone who wanted one 😅
@@StripeyHatGuy We will 100% buy one Stripey. Keep everyone posted.
Thank you so much! Will do a proper video about it as soon as kickstarter starts.
Sorry mate I don’t want to go on about it but you will get the support of all your subscribers, and we will def share it on our channel. Fingers crossed for you mate 🤞ATB Donny and Maxine
Much appreciated mate! Hopefully we can the material sourced very soon: German engineering made in Scotland 😎
Well done Stripey...excellent work 👍I want to order a cone from your Kickstarted page but need a burner but not the Toaks pot as I already have one. I can only see options for a full cook set or cone only, so is there any way I can pre-order a cone and burner?
Hi Adam,
Oh man we haven’t been thinking of that combination- sorry for that. Can you please write me an email, we will find a solution for that 👍
ATB
Stripey
@@StripeyHatGuy excellent news thanks - but how do I email you as I can’t see an address anywhere?
It is on my channel in the about section. I do not want to send the email here because of bots. Alternatively you can give me a ping on Instagram in the case you have it.
Hi Stripey, I have a Vesuv cone and it’s really efficient but the press stud fastening deforms the material on opening! I’ve made a few myself out of 0.1mm titanium but neat cutting is not really possible. Since the Stormin comes can no longer be obtained and the Caldera items have to come from the USA I’d have thought there’ll be a big market for it in the uk. Are you also going to produce a puck burner to go with it? I use my vesuv with a 600ml Evernew pan, so when your production is up and running you can put me down for an order! Great Stuff Thanks.
Thanks a lot Nick! Yes I will provide the stove with it for the highest efficiency possible - I will explain how and why this is the case in a later video closer to the start of kickstarter but in short the whole cone layout is calculated and for a reduction of variables I used the ‘stove’ surface and height as fixed. (I have a video on the stove on my channel).
This is also the reason why the FeatherLight 700 has its highest efficiency with the Toaks 700 pot. Of course you could use a pot with the same diameter but other measurements would be probably off and the efficiency would be lower.
Cheers
Stripey
Looks good Stripey
Cheers Pete!
Will def be ordering one if you have options for different pots,
Nice to hear, initially I will do only a Featherlight 700 as it is the most efficient combination - which means not that no other pot sizes are considered for future projects.
Cheers
Stripey
@@StripeyHatGuy I imagine I’ll get one anyway. Apologies which pot is it for?
@richardwaudby7338 no worries! The FeatherLight 700 will be for the Toaks 700ml long handle, or other pots with the same measurements. I already implied in the name with 700 that other sizes might follow in the future but I want to first finish one kickstarter and then I need to have a look if/how I will proceed.
Superb Stripey 😍👍..It looks brilliant 😁..Hope you have great success with it..Iam sure you will 😁
Cheers
Robert
Thanks a lot Robert! 🙌👍
Stripey if you're using 300 series stainless steel it generally comes from Asia.
Jepp that is right! In Germany we use like 1.4xxx but I still think that most comes from Asia/India. Thankfully the material sourcing is sorted ;-)
Thanks
Stripey
Full support mate! ✊
Thanks a lot much appreciated 🙌
Hi just seen this, are they available to buy yet? They look an awesome big of kit! 👍
Just occasionally YT requires a double thumbs up button. Made up for you getting this far 👍👍
Thank you very much James 😊
Super awesome project! Do you plan to make different sizes? I mostly use a toaks 550ml light and currently use an X-Boil UL it works really well but a cone design is more efficient so I can't wait to see if you're able release a finished product soon :)
In the very beginning it is only a FeatherLight 700 planned as it is the most efficient combination! What the future brings I am not sure, but say me like this - if enough people need a cone for 550ml I am sure we can sort something out.
Cheers
Stripey
Awesome when can i get this ?
Thanks a lot! we will start a kickstarter campaign very soon - if you want to get notified when we start you can enter your email address on our website and we will notify you. No strings attached!
I posted the website link in my community post.
Cheers
Stripey
@@StripeyHatGuy yeah I've signed up to that is there a rough time frame when can actually get but love the channel dude
Thank you very much! Regarding the time frame it is really difficult and I would rather not say 4 weeks, 8 weeks or even 12 weeks as people would get understandable disappointed if I couldn’t hold my word. I can only say that the initial plan was that everything would be already available and that right now we are checking roughly for the demand to get an idea how many pieces need to get produced that we don’t get any delay with shipping it straight after the campaign.
Sorry for not being more helpful here…
ATB
Stripey
@@StripeyHatGuy no worries yeah I understand that looks forward to it anyway
Looks great Stripey 👌 Mates rates? 😉 You'll soon be giving speedster Stoves a run for it's money...
Cheers Kev,
No worries, it will come with a stove I calculated it with - alternatively I have already a video how to make your own on my channel. 😉
well done
Thanks a lot much appreciated!
With all the nice comments and people waiting to buy one I guess you will be sleeping with those eyes tonight 🤑🤑🤑 , 😂
Nice job Stripey , best luck with your project
Hahaha, not quite mate 😂 Thanks a lot so much appreciated, future will tell what happens 😎
I cant find a link to the kit thankyou
Hi Thomas and thank you very much! I have a link in my ‘about’ and in my community posts. Thank you Stripey
Where can I get one please
wildsideadventures.framer.website/
Fantastic. I'll have one 😊👍
Thank you so much! Will do a proper video of the FeatherLight 700 as soon as I am ready for Kickstarter.
Thanks a lot
Stripey
Got mine ordered on kickstarter today my man backer #83
Thank you so much 🥳
Great design👍 ridiculous you can't easily source the metal plate in this country. Sigh - our long lost industrial past.
Like a dog with two tails😂
Haven’t heard this before 😂
@@StripeyHatGuy every day is a school day with me.
😂
Very well done Stripey! Looks an amazing product for the serious wild/back packer. Once you've got some product you can shlep it around the youtube boys and girls who have big numbers, and will, i have absolutely no doubt will give it rave reviews, mate!
Oh, run a competition to name this piece of kit, I'll start. "The Stripey Cone !"....... yeah i know, not likely a winner😅
Sorry Stripey, I see you have a product name!
Thank you very much! Yeah this might be an option, not sure so if this is the aim of it. I personally don't trust 'Review RUclipsrs' which review gear they have only used once for 10 min, 1 day, 1 week.
ATB
Stripey
Agreed, Stripey. There are a few genuine/ trusted ones, I suppose you would need to know them personally or have to come from a very very trusted source. There are a few 'gold standard' ones out there in my humble option👍