2018-2023 Ford Mustang GT 5.0L Dyno Run - Stock vs JLT No Tune Required Intake Kit 10-15 Horsepower

Поделиться
HTML-код
  • Опубликовано: 2 окт 2024
  • To learn more about JLT's No Tune Required Cold Air Intake kit for the 2018-2022 Ford Mustang GT 5.0L, Visit
    www.sbfilters....

Комментарии • 70

  • @gapszn5.0
    @gapszn5.0 2 года назад +6

    JLT always delivers! You guys NAILED it with this one again. Running this one on my ported boss 2018 and I love every bit of it!!

  • @NitrousExpressCoyote
    @NitrousExpressCoyote Год назад +3

    It’s sucking the lid to the air box 😂

  • @liptonicetea274
    @liptonicetea274 Год назад +3

    will we get a lid for older larger jlt intakes for the mustang?

  • @justa3v619
    @justa3v619 4 месяца назад

    What’s the difference between this one and the tune required? I have the tune required on my 19 gt pp1 10 speed. When I bought it I didn’t see a no tune required intake guess this is fairly new? Bought mine about 2 years ago

  • @jessemccaffrey320
    @jessemccaffrey320 10 месяцев назад

    All the shift points are figured out in auto mode on a speed run. Paddles are for autocross. Peak torque is 4500 and peak power is 5800-6800 so no need to redline it.

  • @Ryan-vn6ju
    @Ryan-vn6ju 2 года назад +1

    Hey I just bought one do you know the intake tube size?

  • @jessefrias2575
    @jessefrias2575 3 месяца назад

    Hot air intake.? lost power after every run 😂😂😂

  • @Unsub424
    @Unsub424 Год назад

    Put on the Airaid Red dry filter closed box system on my 2020 GT, and to me it just feels like I lost a bit of torque and hp down low. Not sure if its just me or what. I had considered putting the stock box back on to do a little more comparison between the two, but probably wont. The airaid just looks to sweet and if there is a difference it's probably to small to really notice. About to put on a Corsa sport cat back on , hoping that maybe makes a little difference.

  • @jesusmandujano7897
    @jesusmandujano7897 Год назад

    Will this intake work on a 2021 mustang saleen white label

  • @LeadFootRebel
    @LeadFootRebel Год назад

    J is it the same for 2023 Mustang GT?

  • @shadowsong6
    @shadowsong6 2 года назад +1

    Is the MAF tube on this also 120mm like the open air kit or is it smaller?

    • @juanito3.5
      @juanito3.5 2 года назад +2

      No that's why it's no tune. A bigger tube than 100 mm will require tune.

  • @C7Tmac
    @C7Tmac 2 года назад +1

    Just ordered mine

  • @SuperJbohn
    @SuperJbohn 6 месяцев назад

    I have a blue mustang, is it possible to swap the red filter for a blue filter to match my color scheme.?

    • @jeffkelly9197
      @jeffkelly9197 5 месяцев назад +1

      They have a gray dry filter color that would look great with blue. I just got mine installed today and love it.

  • @juanito3.5
    @juanito3.5 2 года назад +2

    Have you tested the IATs ?

  • @justinrodriguez3430
    @justinrodriguez3430 Год назад +2

    So we just drive around w our hoods up huh

  • @C7Tmac
    @C7Tmac 2 года назад +2

    will you add more hp with a tune ?

    • @Car_nage
      @Car_nage 2 года назад

      Yes always do bro he says it at the end you get about 30 the same as the other jlt Intake with a tune

  • @dc5131
    @dc5131 2 года назад +2

    Do a back to back run with the hoods shut - stock cold air intake vs. after market cold air intake…

    • @JLTPERFORMANCE
      @JLTPERFORMANCE  2 года назад +4

      1) dyno fans don't flow the airflow you would get at speed. 2) closed box vs closed box, hood up is apples to apples

    • @dc5131
      @dc5131 2 года назад

      @@JLTPERFORMANCE have you ran the numbers ? Do you have the data on this ? Thanks -

    • @JLTPERFORMANCE
      @JLTPERFORMANCE  2 года назад +3

      @@dc5131 common sense on the fans. Dyno runs are about 50-150 mph and you can feel the air flow from the fans is nothing like real street air flow. You can also see IAT temps on the dash at speed and see they are just above ambient temp. Hood up is just getting ambient air to the engine area like at speed. Hood down sitting on a dyno is not as if at speed.

    • @dc5131
      @dc5131 2 года назад +1

      @@JLTPERFORMANCE good points - just curious if you guys had the hard data - I purchased one for the charger - waiting for it to land

    • @shanebanich1498
      @shanebanich1498 10 месяцев назад +1

      ​@JLTPERFORMANCE unless the cone filter is closed off and sucks air from outside the engine bay isn't it just sucking hot air from the closed engine bay when your driving?!? If you closed the hood and let the car run for a while then try the run wouldn't that more of a real world test??

  • @ohiodronephotography3222
    @ohiodronephotography3222 10 месяцев назад +1

    Has anyone done this on a 22+ with the charcoal filter? Gains should be pretty big from an intake.

    • @jeffkelly9197
      @jeffkelly9197 5 месяцев назад

      Yeah I have a 22 PP1 and just got mine installed today, but I got it done with their gray filter. This, combined with a C&L h pipe really wakes the car up.

    • @KingZD1
      @KingZD1 Месяц назад

      @@jeffkelly9197 did you get a tune or no tune? yea i wanna get rid of my charcoal filter

    • @jeffkelly9197
      @jeffkelly9197 Месяц назад

      @KingZD1 No tune and no check engine light. I ripped the charcoal filters out when I got it and then finally gave into the cai. Just make sure you get the no tune one. I was worried that the 22+ models would be more sensitive to check engine lights, but I haven't had any issues 5k mikes later. I also paired this with an h pipe, and eibach lowering springs couldn't be happier.

    • @KingZD1
      @KingZD1 Месяц назад

      @@jeffkelly9197 I heard most people say the stock intake is good on these cars, just remove the charcoal filter and get a KN Drop in filter. The aftermarket CAI's heatsoak too much in traffic, dont want to do that living in a hot state (PA).

    • @jeffkelly9197
      @jeffkelly9197 Месяц назад

      @KingZD1 that was my thinking, but the drop in k&n gave me a check engine light. I'm sure I just had bad luck, but it didn't seal properly. Intake temps on the jlt are the same as stock because it's an enclosed box. If the k&n filter worked for me, I probably would still have that. Having said that, I'm happy I have this one and recommend it.

  • @R6ITY
    @R6ITY 2 года назад +3

    Just bought mine 🙌🏼

    • @C7Tmac
      @C7Tmac 2 года назад

      same bro

    • @jeffkelly9197
      @jeffkelly9197 6 месяцев назад

      How do you like it ? I'm installing mine this week.

  • @C7Tmac
    @C7Tmac 2 года назад +1

    will a tune benefit this intake as well ?

  • @bcspiel
    @bcspiel Год назад

    Curious, what year was the GT. Since the 22s and 23s come factory with 450hp vs 460hp.

    • @S3th
      @S3th Год назад +5

      The 22+ make 450 simply because Ford had to stuff a charcoal filter in the intake for emissions, if you rip that out then you will pick up horsepower and you’re back at previous gen 3 HP

    • @thecaboose6591
      @thecaboose6591 Год назад

      BHP VS WHP

  • @justinrodriguez3430
    @justinrodriguez3430 Год назад +1

    😂😂😂

  • @Tyquelle97
    @Tyquelle97 Год назад

    How were fuel rims?

  • @zipzap4706
    @zipzap4706 2 года назад

    If I use the vented lid, will there be a problem with water getting into intake/filter/engine via the hood vent drain hole?

    • @JLTPERFORMANCE
      @JLTPERFORMANCE  2 года назад +1

      That's why 2 are included, so you can interchange them depending on the weather

    • @zipzap4706
      @zipzap4706 2 года назад

      @@JLTPERFORMANCE Perfect! Thanks!

  • @zgblundell
    @zgblundell 2 года назад

    Where can we purchase this closed air intake with no tune required?

    • @pawg206
      @pawg206 2 года назад

      On there website lol

    • @zgblundell
      @zgblundell 2 года назад

      @@pawg206 hmmmm 🧐🤔well that makes sense but you know it’s a little cheaper through a vendor sometimes. Dollar match my guy!!

    • @pawg206
      @pawg206 2 года назад

      @@zgblundell ok good luck finding it cheaper.

  • @yaboichris5.0
    @yaboichris5.0 Год назад +2

    What a joke , people actually believe this bs 😂

    • @Byebyesmeow
      @Byebyesmeow Год назад

      ?

    • @fastfreddy7111
      @fastfreddy7111 Год назад

      Please explain? Do you work for K&N? or Airaid? I put my 2021 Mustang on my buddys dyno and got 16HP..waiting for my Bama tune to come in tomorrow and see were that takes me. So what is BS??..I really would like to know? or maybe you are just trolling and I bit the bait!??..LOL

    • @GTFDN
      @GTFDN Год назад

      @@fastfreddy7111 you put this intake on ? And did a before and after dyno and you gained that much with no tune ? Impressive if so

  • @CamS550
    @CamS550 2 года назад

    So the open and closed gain about the same amount hp

    • @JLTPERFORMANCE
      @JLTPERFORMANCE  2 года назад

      Not sure I understand the question

    • @CamS550
      @CamS550 2 года назад

      @@JLTPERFORMANCE which one give more hp gains

    • @JLTPERFORMANCE
      @JLTPERFORMANCE  2 года назад

      @@CamS550 tune required kit gains 30+ with the tune.

  • @Car_nage
    @Car_nage 2 года назад +1

    I got mine today and I have the check engine light on 😪😔

    • @jeffkelly9197
      @jeffkelly9197 6 месяцев назад

      Were you able to fix it, I have 2022 and worried about getting a check engine light.

  • @supra8065
    @supra8065 2 года назад

    Is the jlt intake box lid flexing during the pull?

    • @JLTPERFORMANCE
      @JLTPERFORMANCE  2 года назад

      Imagine the power it would gain if it was removed. When driving you will have much more air rammed in from the inlet.

    • @zipzap4706
      @zipzap4706 2 года назад

      It's being sucked down as the engine is drawing in air @ high rpm/under load.

    • @zipzap4706
      @zipzap4706 2 года назад

      @@JLTPERFORMANCE Are you saying hp/tq would be increased with no lid? Isn't the vented lid supposed to allow more flow?

    • @JLTPERFORMANCE
      @JLTPERFORMANCE  2 года назад +1

      @@zipzap4706 exactly

  • @youngbuck388
    @youngbuck388 Год назад

    Will this fit 2012 5.0 ??

  • @frankz5864
    @frankz5864 2 года назад

    I don’t think this company will be in business much longer 🤣🤣🤣