aqui no controlador pwm azuzinho de 10 ah, adicionei mais dois Mosfet zj70n78 no circuito eletrônico do controlador pwm azuzinho funcionou um puco melhor no painel de 150w. na aula do RUclips erivaldo grid solar tinha que ser um controlador pwm de 20ah em um painel solar de 150 watts pra carregar uma bateria de 150 ah.
Yes finally its 113 the only thing in this scc delaying 10 mins thats why im hard to figure it out unlike my previous pwm scc when i turn off the pv breaker its only a seconds to come
Hi, I just bought the EPEVER VS6048AU and I have a few doubts. I don't have a solar system but I have an Eolic system. It's already installed and working. 1. Can I use this EPEVER for an Eolic system? 2. Can I connect the Eolic cables into the PV ViewStart terminals? 3. What should be the wiring when I have both systems working (Eolic and solar). Thanks a lot for your help.
I have this controller in 60W size. It has a timer and I have set it to turn on my lights at sunset and go off 6 hours later. It doesn't seem to be working. Can someone tell me how the controller knows when sunset is? I don't see any type of sensor that would tell the controller what's going on outside nor do I see a way to actually set the time. I would appreciate any help as I am new at this.
@@Oneupthesleevecustoms ok, i have another question if you have time. Can i connect 24 volt panel with PMW charge controller to charge 12 volt battery, except energy losses is there any other problem? Thanks for the replay i really appreciate.
Yeah mate ideally you want double the incoming voltage to the battery voltage. It allows for the most power transfer. These units can take up to 50v input. Some solar panels now state the maximum power point voltage. Often 30v
Hello, i have buy this epever controller im novice, the solar panel was charging my battery and on the controller everything was fine until it reached at 13.8v it started to decrease 13.7v, 13.6 13.5 I have disconnected the controller from the battery, do you know what the reason is? My battery is gel 150ah. Thank you
Do you know what is the max current output on the load terminals? I have a 1100 watt inverter and not sure if I should connecting it to those terminals or connect it straight to the battery. I don't think my inverter has any sort of low voltage protection
Hi, i have epever vs6024au, and display dont show V symbol. My mean displaying only 13.0 but it's must show 13.0V. V symbol problem. What can be problem or how to fix it ? Have Anyone an idea?. Thank you
@@Oneupthesleevecustoms thanks for the reply. i dont have a bms as yet, i have a 7s 20p pack and used 18650 repackr to build the packs which comes out at 51AH for each pack, could i run without a bms ?
saludos, quiero saber si pongo 3 baterías en serie 36v el regulador me podría entregar 12v para el inversor o siempre me entregara el voltaje de las baterias (serie)
How many volts in solar panels can it handle I'm looking at a 60a version just like that one what scares me is it saying only 50 volts voc ?? like really that's it what's that one panel??
@@Oneupthesleevecustoms I have a total of 5 I'm actually using 4 right now on my 60a/40a 24v 3000w hybrid inverter charger I only wanted the Epever for the remaining panel I was just surprised that it was only 50 voc
I use an MPPT Epever for my stuff. They're really good. Mine has an Ethernet port so I can also publish stats on PVOutput.
Thats very cool mate. Does the kwh just keep counting up?
Col mate 😎
Thanks mate i reset it about 2 weeks ago and i brought a second one since and ones up to 44kwh the other 40kwh. Been good solar days
can I use this on my two 18v 180w solar panel to change my 12v battery
You sure can they are great pwm charge controllers
Hello! Do you have find out how does the controller do the equalizing charge?
Yeah mate its stated in its instructions
aqui no controlador pwm azuzinho de 10 ah, adicionei mais dois Mosfet zj70n78 no circuito eletrônico do controlador pwm azuzinho funcionou um puco melhor no painel de 150w. na aula do RUclips erivaldo grid solar tinha que ser um controlador pwm de 20ah em um painel solar de 150 watts pra carregar uma bateria de 150 ah.
nothing happens when i set to 113 it must be on the lights when pv breaker is off how to set pls
Hey sorry I missed this comment did you work it out
Yes finally its 113 the only thing in this scc delaying 10 mins thats why im hard to figure it out unlike my previous pwm scc when i turn off the pv breaker its only a seconds to come
Hi, I just bought the EPEVER VS6048AU and I have a few doubts.
I don't have a solar system but I have an Eolic system. It's already installed and working.
1. Can I use this EPEVER for an Eolic system?
2. Can I connect the Eolic cables into the PV ViewStart terminals?
3. What should be the wiring when I have both systems working (Eolic and solar).
Thanks a lot for your help.
how to set the load side light on dusk to dawn please reply
www.epever.com/product/vs-au-10-60a-pwm-charge-controller/
You can change the modes . Download the data sheet at this link
117 is default when i put to 113 nothing happens when pv is off on breaker
I have this controller in 60W size. It has a timer and I have set it to turn on my lights at sunset and go off 6 hours later. It doesn't seem to be working. Can someone tell me how the controller knows when sunset is? I don't see any type of sensor that would tell the controller what's going on outside nor do I see a way to actually set the time. I would appreciate any help as I am new at this.
When it has no solar incoming voltage mate👍👍👍
I really like this controller, do you know if it stabilizes the output at 12V? I would like to put some 12V led lights
The load out is battery voltage. What are you using
@@Oneupthesleevecustoms
Thanks, if you use the battery voltage, can the 12V lights be damaged?
grate video, i have one question. What tension is between load poles of controller, is it the same as the battery tension?
What do you mean by tension.
@@Oneupthesleevecustoms sorry voltage.
Ah yes the battery voltage is same as load. Just switches through unit
@@Oneupthesleevecustoms ok, i have another question if you have time. Can i connect 24 volt panel with PMW charge controller to charge 12 volt battery, except energy losses is there any other problem? Thanks for the replay i really appreciate.
Yeah mate ideally you want double the incoming voltage to the battery voltage. It allows for the most power transfer. These units can take up to 50v input. Some solar panels now state the maximum power point voltage. Often 30v
Since you have a breakdown? I would like to do it every day. Do you have reliability?
These charge controllers are great had over 150kwh through it so far
Hello, i have buy this epever controller im novice, the solar panel was charging my battery and on the controller everything was fine until it reached at 13.8v it started to decrease 13.7v, 13.6 13.5 I have disconnected the controller from the battery, do you know what the reason is? My battery is gel 150ah. Thank you
13.8 is float voltage
Does it work without a Battery attached?
No needs battery. Works as usb and volt monitor and load out without solar
Is it working still?
Yes great units I have 2
Do you know what is the max current output on the load terminals? I have a 1100 watt inverter and not sure if I should connecting it to those terminals or connect it straight to the battery. I don't think my inverter has any sort of low voltage protection
It's 30 amps. And they get warm in mid 20s mate. No way it will hold a inverter.
Straight to battery
@@Oneupthesleevecustoms Thanks for the insight!!
No dramas thanks for watching
Hi, i have epever vs6024au, and display dont show V symbol. My mean displaying only 13.0 but it's must show 13.0V. V symbol problem. What can be problem or how to fix it ? Have Anyone an idea?. Thank you
Is this possible to use with AGM batteries?
Sure is has a sealed battery mode
@@Oneupthesleevecustoms Thank you.
Can this charge controller charge a 7s 18650 pack using a single 280w solar panel?
It can charge to a 7s bms yes
@@Oneupthesleevecustoms thanks for the reply. i dont have a bms as yet, i have a 7s 20p pack and used 18650 repackr to build the packs which comes out at 51AH for each pack, could i run without a bms ?
No never run without bms mate the risk.is not worth it
saludos, quiero saber si pongo 3 baterías en serie 36v el regulador me podría entregar 12v para el inversor o siempre me entregara el voltaje de las baterias (serie)
How many volts in solar panels can it handle I'm looking at a 60a version just like that one what scares me is it saying only 50 volts voc ?? like really that's it what's that one panel??
Yeah low input voltage but then you just parallel the panels
@@Oneupthesleevecustoms yeah but my panels are 47.4v 355w panels
@@diysolaradventures7894 so you put them in parallel not series how many do you have
@@Oneupthesleevecustoms I have a total of 5 I'm actually using 4 right now on my 60a/40a 24v 3000w hybrid inverter charger I only wanted the Epever for the remaining panel I was just surprised that it was only 50 voc
Yeah it's a bit limiting
Hello, this device charges lithium batteries, please
No lithium ion settings
Col video I like it and in ( 4 monhts IS my birhday) 😎
Do you have any solar
Yah I have a solar you to yah 😉😎
Free power from the sun 👌👌👌
Yah man Nice and my friend bio a new car today 😎
What sort
When the battery is full, this device disconnects the battery charger
Yes