Great Video Sir. I love how detailed you are on the RIF from outside and internally . Great to have some basic tech advice from someone who makes it simple and easy to understand. Keep them coming.
@@mehdib4871 hi mate it's a G&G mp5 1200rd drum mag, you manually wind it on the front but honestly it's mint. Problem with mp5s is even the high cap mags are only 200rd
There is 3 models of blue limited edition Cyma MP5's: SD6, A4-J (classic) and A4 RIS like this in video. Its solid gun despite price, and internals are preupgraded so you dont need to switch all of them doing tune. The only thing annoying is hopup chamber which I replaced by rotary hopup chamber (M4 prowin type). It performs very good with country limits up to 130m/s, no disadvantage against M4's and AK's
Hell Ei, i got the CM.041J BLUE EDITION a week ago and the hopup is driving me crazy. It's absolute shit. I am a mechanical and airsoft noob unfortunately and can't seem to find info on a good compatible hop up chamber to replace the ridiculous plastic strip hopup the gun came with. Could you give me the model of what chamber worked for you or any other hopup you would recommend for this gun?
I purchased the high speed version from Taiwan. Came in firing at 370 which is hot though expected. On taking it down it had no airseal. Damaged o rings on the cylinder head and as you mention a naff o ring. Swapping the o rings out. Putting in a decent spring and a o ring nozzle with a 11.1 I'm getting 27 RPS with decent accuracy (using a maple leaf bucking and omega nub.
Starting with airsoft and this is my first gun which I got today! Thanks for the detailed video, helped me to figure out how to open for the batteries. :D
O-ring on those Savia group (OEM for CYMA V2 gearbox) piston heads is a bit small. Change that out to a slightly larger one and you can get some more consistent FPS, but the larger O-ring could slow the piston down a bit. Play around with different O-rings and find the right balance. Everything else in these gearboxes is pretty fantastic for what you pay, but I would avoid the microswitch MOSFET-equipped units (like the CYMA platinum M4s) unless you're ready to replace it. That MOSFET board is utter garbage. Thank god it was omitted for the MP5s.
Are you telling that Cyma Platinum mp5 are equipped with the same mosfet of the m4's models? Indeed had to put a titan in my m4 Cyma plat, mosfet burned in 3 games. 🤮😂
I AM a noob in Airsoft...i love the MP5 with hybrid sling 2/1 point sling...how accurate are these things? Love the versatility ...skirm in the Woods and cqb indoors...
Hls survival and bushcraft accuracy is okay but you are limited to what you can do with the hop unit. For the price, it’s a great gun but it’s still a budget option. Upgrades help but there are no aftermarket hop units which is a shame.
Great video. Do you know how to remove the front end (outer barrel and cocking tube)? My replica has a lot of movement in that area and I need to fix it somehow
Hi, any update on the upgrades that you've done? Will there be another video? I have the same model and took it out yesterday and it was ok, but I can see that it just needs tweaking. My selector lever really needs sorting out. Loving your videos.👍
Hey Bigbird, I got mine for my first project. Really like it, although I got it from Taiwangun and its firing 400fps. Can you recommend a spring for these to bring it down to sub 350fps?
Great review! What type of supressors can it take? Can you change the flash hider for a normal thread supressor or are you forced to buy that special quick detatch one? If so, where can you find it? Thanks!
Leo AP any14mm ccw threaded suppressor. There is a threaded cap on the end of the barrel. Or you can fit the bayonet type that I have. I can’t remember where I got it from though as I’ve had it 10 years. I just remember I got it from HK.
Who doesnt love a bit of Electric Blue (one for the older viewer there) - bummed I missed out on the Atacs, I think its a really decent camo for UK/Irish conditions.
Where did you find the classic smooth front handguard? My mates been looking for one for ages haha, very nice detailed review, I got the full stock version and I love it, although the hop unit leaves more to be desired, good for short to med ranges 🤘🏻
Hello mate. Can you tell me if we could put an optical mosfet like an Aster in it in rear version with a fully stock from Cyma to put the battery in? Thx in advance 👍 Great review👌🏻🤘
Wow I need to send you my one! It’s my first airsoft gun and I love it but too scared to start messing with it yet. My hop lever is VERY loose and moves about and the fire selector is the opposite of yours (a bit wobbly) but everything else feels solid. Love the 80s / 90s action movie vibe from it and would love to sharpen it up a little.
Thanks for the video! grabbed one of these as a starting CQ gun and making modifications to it but how the hell did you get the front ironsights off? [if you took that section off at all?]
As a german, I wont stop running HK only... except my russian gobnik -> tachanka -> killa etc. side takes over and I buy a ak or smth. with zenit etc parts
There is something very special with a full HK loadout especially if there is a bit of flecktarn too 😉👌 Everyone needs a bad gut AK though lol. Look out the Specna AK review soon.
LinuxMeister I put 7.4 lipos in guns without mosfets all the time. This one is no different. I wouldn’t risk 11.1’s but 7.4 should be fine. Your trigger contacts will probably wear out a little faster but not like you’d notice. That’s my experience anyway.
Just got mine from taiwangun and its a cool gun but i dont like the fire selector much, its stiff and gets in the way of your hand when its on full auto☹️
Ive heard that the externals got updated on the blue series with better materials. Do you know if thats true? How does the plastic lower receiver feel?
Hi ,i bought this replica and i cant seam to fit the(factory) battery or to be precise i cant mount the hand guard with the battery inside can u pls help me ive spent like 2 hours trying to fit it all together...and its not the first time im doing this im so lost....
I have the same mp5 version as you and I want to swap the stock for a retractable stock (also from cyma), but I was wondering if it fits because I read somewhere that it doesn't fit on this version.
Yeah but the scar will go a lot farther. To be honest, the 20m groupings are just for reference, I’m finding more and more that there are too many contributing factors to draw any major conclusions between guns. You live and learn I guess 👍 you’re right about Cyma though
@@BIGBIRDSAIRSOFT cheers pal no worries. Just can’t seem to find an MP5 nozzle that’s got a good review and I’m getting ignored on AFUK 😂 cheers anyway mate
SerDaveOfRindyar over here the Elite force guns are called Umarex for some reason but they are solid builds form what I’ve seen, but quite expensive when compared to Cyma. Real shame you can’t get them. Licensing 😒
Diemaco was taken over Colt and is operating under the name Colt Canada. On the real gun the upper is momolithic ie the rail is machined from the same piece of ally as the upper receiver. As for the mp5 and it aluminium' yeah right its most likely a cast fake weld.
Lunch They are indeed👍🏼 Recently I dug out my very first AEG (CYMA MP5SD6) from the closet and converted it to an SD5, put an Warfet in it and changed out a few things. IMO CYMA’s really, REALLY great base replicas to tinker with AND the externals a rather sturdy.
recently got this one, the hop up unit is so loose that it just wants to slide back to no hop whenever there is even a bit of vibrations, tried to tighten the screw but it doesnt go further in, any tips how to fix this?
Skatarded if the screw is already tight, you can take it out and put a small o’ring on the screw and put it back in. The o’ring will grip the slide and stop it moving.
how did you learn to tech? i want to start playing around inside mine but obviously don't want to break it...nowhere is open at the minute to fix my mistakes haha
Dunstano I feel your pain! I’m waiting for a gun to arrive for a review 😬 honestly I have learned the hard way. I’m pretty good at mechanics as I spent many years building and racing motorbikes. When I started airsoft I thought “I can do this”. I made many mistakes, listened to bad advise and eventually found my own way around an Airsoft gun. You never stop learning. There are lots of “how to” videos and some are good and some are rubbish. Best thing to do is learn the basics of how the gearbox works. Shimming, air seal, motor height, and greasing the correct parts. Learn how the hop unit works and get a good quality hop rubber and nub. Don’t worry about all the R-hops, DSG setups as most of it will just cause you more pain and no gain. Lean to solder and get a good soldering iron, they’re not expensive. I do some stuff that I don’t really see anyone else do but I know works. 👍 go slow, don’t loose springs and take photos so you don’t forget.
BIGBIRDSAIRSOFT haha cheers for the advice and keep up the good work, love the in depth tear down videos gives me the confidence to look into mine because I know what I’m actually looking at now. Where do you source parts from and will most parts fit every v2 gearbox?
Dunstano I get my parts from all over the place but Bullseye Country Sport have a lot of what I use. Most V2 stuff fits but it is alway good to match parts. Some of the high end stuff is good but so are the SHS parts to save some money.
Green Star Gaming apologies it’s actually Taiwan Gun www.taiwangun.com/en/electric-3/cm-041-blue-limited-edition-cyma?from=listing&campaign-id=14&q=Cyma
Where are you getting the mp5 mags from, I'm struggling to find mid caps that aren't mag brand also just bought the mp5 SD blue edition and hunting for mags
Karl Roadie it really comes down to details. The Cyma is cheaper than even the Specna Core series and so are the magazines. However, the Specna has some nice addition. It’s AR/M4 based so there is a mountain of accessories and upgrades such as hop units etc. they have a quick change spring gearbox (that’s only good if you work on them really) and usually a rail system dependant on the model. Not forgetting nearly all tactical gear is set up for AR mags. The MP5 is awesome because it’s not an M4! Lol. You’ll be good with earthier and a lot is to do with which you like the look of but, honestly, the Specna’s are hard to beat for value. Just makes sure you get the gearbox checked, greased and shimmed.
not sure if you mentioned it in the video, if I missed it my bad. However do you have any idea what handguards are compatible with cyma mp5? does realsteel fit?
![ATEEZ(에이티즈) - [GOLDEN HOUR : Part.2] Preview](http://i.ytimg.com/vi/X4PfgRPBUVo/mqdefault.jpg)
Great Video Sir. I love how detailed you are on the RIF from outside and internally . Great to have some basic tech advice from someone who makes it simple and easy to understand. Keep them coming.
I own this gun and been using it for the past year I love it, running it with a drum mag. Good vid mate 👍👏
What drum are you using please mate?
@@mehdib4871 hi mate it's a G&G mp5 1200rd drum mag, you manually wind it on the front but honestly it's mint. Problem with mp5s is even the high cap mags are only 200rd
There is 3 models of blue limited edition Cyma MP5's: SD6, A4-J (classic) and A4 RIS like this in video. Its solid gun despite price, and internals are preupgraded so you dont need to switch all of them doing tune. The only thing annoying is hopup chamber which I replaced by rotary hopup chamber (M4 prowin type). It performs very good with country limits up to 130m/s, no disadvantage against M4's and AK's
Can you just drop in the M4 Prowin unit ?
or do you need to modify it ?
@Hamish McIndy ty.
Am gonna try a G&G green first.
But have a prome, if it gives me trouble.
What about the hop unit ?
Any advice ?
wait.are you talking about an m4 hopup inside a mp5?
@@raitrometkuuse1083 yes
Hell Ei, i got the CM.041J BLUE EDITION a week ago and the hopup is driving me crazy. It's absolute shit. I am a mechanical and airsoft noob unfortunately and can't seem to find info on a good compatible hop up chamber to replace the ridiculous plastic strip hopup the gun came with. Could you give me the model of what chamber worked for you or any other hopup you would recommend for this gun?
I purchased the high speed version from Taiwan. Came in firing at 370 which is hot though expected. On taking it down it had no airseal. Damaged o rings on the cylinder head and as you mention a naff o ring.
Swapping the o rings out. Putting in a decent spring and a o ring nozzle with a 11.1 I'm getting 27 RPS with decent accuracy (using a maple leaf bucking and omega nub.
Do the picatinny rails come off with an alley key? Thanks for the vid!
Starting with airsoft and this is my first gun which I got today! Thanks for the detailed video, helped me to figure out how to open for the batteries. :D
TheFallenAngel you’re welcome 👍 have fun.
What material is it made of?
@@lr3m743 Mainly metal, but some plastic parts.
@@thefallenangel5190 ok thank you
O-ring on those Savia group (OEM for CYMA V2 gearbox) piston heads is a bit small. Change that out to a slightly larger one and you can get some more consistent FPS, but the larger O-ring could slow the piston down a bit. Play around with different O-rings and find the right balance. Everything else in these gearboxes is pretty fantastic for what you pay, but I would avoid the microswitch MOSFET-equipped units (like the CYMA platinum M4s) unless you're ready to replace it. That MOSFET board is utter garbage. Thank god it was omitted for the MP5s.
Are you telling that Cyma Platinum mp5 are equipped with the same mosfet of the m4's models?
Indeed had to put a titan in my m4 Cyma plat, mosfet burned in 3 games. 🤮😂
I AM a noob in Airsoft...i love the MP5 with hybrid sling 2/1 point sling...how accurate are these things? Love the versatility ...skirm in the Woods and cqb indoors...
Hls survival and bushcraft accuracy is okay but you are limited to what you can do with the hop unit. For the price, it’s a great gun but it’s still a budget option. Upgrades help but there are no aftermarket hop units which is a shame.
@@BIGBIRDSAIRSOFT ok thank you 👍
Great video. Do you know how to remove the front end (outer barrel and cocking tube)? My replica has a lot of movement in that area and I need to fix it somehow
Hi, any update on the upgrades that you've done? Will there be another video? I have the same model and took it out yesterday and it was ok, but I can see that it just needs tweaking. My selector lever really needs sorting out. Loving your videos.👍
Scott Gafney I’ve not had chance to do anything to it yet, but it is on my list of things to do. Not sue when though.
Hey Bigbird, I got mine for my first project. Really like it, although I got it from Taiwangun and its firing 400fps. Can you recommend a spring for these to bring it down to sub 350fps?
Can i ask you which adjustable stock did you use? I bought same cyma and bought stock aswell cyma, however it doesn't fit :(
Great review! What type of supressors can it take? Can you change the flash hider for a normal thread supressor or are you forced to buy that special quick detatch one? If so, where can you find it? Thanks!
Leo AP any14mm ccw threaded suppressor. There is a threaded cap on the end of the barrel. Or you can fit the bayonet type that I have. I can’t remember where I got it from though as I’ve had it 10 years. I just remember I got it from HK.
@@BIGBIRDSAIRSOFT That's great, thanks a lot for the quick answer!
Who doesnt love a bit of Electric Blue (one for the older viewer there) - bummed I missed out on the Atacs, I think its a really decent camo for UK/Irish conditions.
Where did you find the classic smooth front handguard? My mates been looking for one for ages haha, very nice detailed review, I got the full stock version and I love it, although the hop unit leaves more to be desired, good for short to med ranges 🤘🏻
This one is in package with mp5
Hello mate. Can you tell me if we could put an optical mosfet like an Aster in it in rear version with a fully stock from Cyma to put the battery in? Thx in advance 👍
Great review👌🏻🤘
Neverminf you answered in the end of the vid 👍 thanks mate. Complete review.
One thing you missed and it is measure holes for bushings. Even from your video is possible to see it how wobble bushings are in the gearbox shell
Wow I need to send you my one! It’s my first airsoft gun and I love it but too scared to start messing with it yet. My hop lever is VERY loose and moves about and the fire selector is the opposite of yours (a bit wobbly) but everything else feels solid. Love the 80s / 90s action movie vibe from it and would love to sharpen it up a little.
Callumbia Snow this gun can be awesome, just needs a little tune. The mp5 is so cool.
virus? nahh not heard anything.
Thanks for the video! grabbed one of these as a starting CQ gun and making modifications to it but how the hell did you get the front ironsights off? [if you took that section off at all?]
Sorry mate I didn’t take it off mate.
@@BIGBIRDSAIRSOFT Ah! grim, time to hit it slightly harder and see if I can't get it loose :D
Hello, just wanted to ask what weapon light setup you have there as looks really nice?
Thank you, this really convinced me.
As a german, I wont stop running HK only...
except my russian gobnik -> tachanka -> killa etc. side takes over and I buy a ak or smth. with zenit etc parts
There is something very special with a full HK loadout especially if there is a bit of flecktarn too 😉👌 Everyone needs a bad gut AK though lol. Look out the Specna AK review soon.
Can we put a LIPO in this MP5? Not having a mosfet is the reason that is making me wonder if I shouldn't buy it
LinuxMeister I put 7.4 lipos in guns without mosfets all the time. This one is no different. I wouldn’t risk 11.1’s but 7.4 should be fine. Your trigger contacts will probably wear out a little faster but not like you’d notice. That’s my experience anyway.
Have it a mosfet ?
Any tips for installing the battery? Im having trouble jamming mine in...
Just got mine from taiwangun and its a cool gun but i dont like the fire selector much, its stiff and gets in the way of your hand when its on full auto☹️
Try putting a big of grease on the back of the selector, it just helps it move.
BIGBIRDSAIRSOFT , sounds like a good plan👍 thanks
Hi great video . where did you get the silencer from ? Cheers
mark evans it was from one of the HK shops I can’t remember which one as I’ve had it about 10 yeas, sorry.
I know there's a price difference but would go for this cyma mp5 or the bolt mp5?
The Bolt mp5 mate. It’s an excellent replica if a little expensive.
The cyma.Bolt is a Bad brand, it will Break.Cyma however, while Feeling cheap, wont and for the left over money you can Upgrade it.
Ive heard that the externals got updated on the blue series with better materials. Do you know if thats true? How does the plastic lower receiver feel?
Aznaur Kasumov it’s okay. Maybe a little shiny compared to more expensive brands but still not bad at all. At this price too.
Love u ceep going im your 25 subscriber
That mp5 is wayyyy better than the competition one from umarex (elite force) here in america
Outstanding video 👍
Hi ,i bought this replica and i cant seam to fit the(factory) battery or to be precise i cant mount the hand guard with the battery inside can u pls help me ive spent like 2 hours trying to fit it all together...and its not the first time im doing this im so lost....
Just ordered one as my second purchase.how have you gone on with yours and will you be doing an update video
Greenie I’ll be honest, I’ve done nothing with it as yet, I can’t keep up lol
BIGBIRDSAIRSOFT no problem.look forward to it when you get time😁👍
Would you recommend an 11'1 lipo?
No, not at all.
@@BIGBIRDSAIRSOFT thanks!
I have the same mp5 version as you and I want to swap the stock for a retractable stock (also from cyma), but I was wondering if it fits because I read somewhere that it doesn't fit on this version.
Simon Baeck sorry mate, I only have the SRC stock and not the Cyma. The SRC doesn’t fit without modifying.
It will fit.Although I would prefer the folding Stock over the minimal sliding stock
what is the weight without the lamp and supressor?
The grouping on this video is better than your vid on the TM Scar haha. CYMA really coming through recently. This is going to be my next purchase.
Yeah but the scar will go a lot farther. To be honest, the 20m groupings are just for reference, I’m finding more and more that there are too many contributing factors to draw any major conclusions between guns. You live and learn I guess 👍 you’re right about Cyma though
BIGBIRDSAIRSOFT Aye, love what you’re doing man. Let’s see some gameplay!!
@@BIGBIRDSAIRSOFT hey man, sorry to peck. Did you use a SHS M4 nozzle in this?
@@ronlancs1874 hi mate, I’m really sorry but I can’t remember for sure, but I think it would have been an MP5 nozzle.
@@BIGBIRDSAIRSOFT cheers pal no worries. Just can’t seem to find an MP5 nozzle that’s got a good review and I’m getting ignored on AFUK 😂 cheers anyway mate
Hello. what is the length of the nozzles?
Are the uppers on these metal or are they also plastic
We can't get CYMA mp5's in the states sadly. Elite force has the monopoly.
SerDaveOfRindyar over here the Elite force guns are called Umarex for some reason but they are solid builds form what I’ve seen, but quite expensive when compared to Cyma. Real shame you can’t get them. Licensing 😒
They won't make a metal receiver SD model for some reason, we're stuck paying $180 USD (currently) for the plastic more or less un-modifiable version
SerDaveOfRindyar that really sucks 🙁
This gun is 100% worth it
Diemaco was taken over Colt and is operating under the name Colt Canada. On the real gun the upper is momolithic ie the rail is machined from the same piece of ally as the upper receiver. As for the mp5 and it aluminium' yeah right its most likely a cast fake weld.
I just love mp5’s, they are so sexi.
Also I love Swat teams, and In sweden the Swat (pikéten) use the mp5
Lunch They are indeed👍🏼 Recently I dug out my very first AEG (CYMA MP5SD6) from the closet and converted it to an SD5, put an Warfet in it and changed out a few things. IMO CYMA’s really, REALLY great base replicas to tinker with AND the externals a rather sturdy.
Mp5s are such a lovely platform
recently got this one, the hop up unit is so loose that it just wants to slide back to no hop whenever there is even a bit of vibrations, tried to tighten the screw but it doesnt go further in, any tips how to fix this?
Skatarded if the screw is already tight, you can take it out and put a small o’ring on the screw and put it back in. The o’ring will grip the slide and stop it moving.
@@BIGBIRDSAIRSOFT thanks man! lucky i recently ordered some o rings
how did you learn to tech? i want to start playing around inside mine but obviously don't want to break it...nowhere is open at the minute to fix my mistakes haha
Dunstano I feel your pain! I’m waiting for a gun to arrive for a review 😬 honestly I have learned the hard way. I’m pretty good at mechanics as I spent many years building and racing motorbikes. When I started airsoft I thought “I can do this”. I made many mistakes, listened to bad advise and eventually found my own way around an Airsoft gun. You never stop learning. There are lots of “how to” videos and some are good and some are rubbish.
Best thing to do is learn the basics of how the gearbox works. Shimming, air seal, motor height, and greasing the correct parts. Learn how the hop unit works and get a good quality hop rubber and nub. Don’t worry about all the R-hops, DSG setups as most of it will just cause you more pain and no gain.
Lean to solder and get a good soldering iron, they’re not expensive. I do some stuff that I don’t really see anyone else do but I know works. 👍
go slow, don’t loose springs and take photos so you don’t forget.
BIGBIRDSAIRSOFT haha cheers for the advice and keep up the good work, love the in depth tear down videos gives me the confidence to look into mine because I know what I’m actually looking at now. Where do you source parts from and will most parts fit every v2 gearbox?
Dunstano I get my parts from all over the place but Bullseye Country Sport have a lot of what I use. Most V2 stuff fits but it is alway good to match parts. Some of the high end stuff is good but so are the SHS parts to save some money.
will hk slapping the charging handle snap it off?
Eventually if you make a habit of it. Now and again will be fine.
Why are these gun in UK sold so weak(seen it in more videos)? In Czech they shoot about 410 FPS with 0,20 g BB out of the box.
Because it would be illegal. Also most UK sites only allow 350fps on full auto.
7.4 or 11.1 lipo?
Greenie 7.4 👍
Specna arms released J series (AK series), do you gonna review it ?
Cem KILIÇ I have one on order, hopefully it will arrive by the end of the week 👍
@@BIGBIRDSAIRSOFT nice.
This or specna arms core sa-c10?
Would a orion gearbox fit in the cyma mp5 ?
007alvareichon possibly but you’d have to change the selector plate and possibly the nozzle. I can’t imagine why you’d want to though.
Where did you get this from ?
Green Star Gaming Gunfire
BIGBIRDSAIRSOFT I couldn’t find it, can you post a link, please
Green Star Gaming apologies it’s actually Taiwan Gun www.taiwangun.com/en/electric-3/cm-041-blue-limited-edition-cyma?from=listing&campaign-id=14&q=Cyma
Looking at buying this gun from this. How long did postage take?
Good review.
Very helpfull video.
Where are you getting the mp5 mags from, I'm struggling to find mid caps that aren't mag brand also just bought the mp5 SD blue edition and hunting for mags
Check here,
www.taiwangun.com/en/aeg-mid-cap/magazine-mid-cap-for-mp5-long-cyma?from=listing
How do you like the SD?
What about king arms mags?
Robbie Sutherland I haven’t got any to try, so I’m not sure.
@@BIGBIRDSAIRSOFT i believe they will work
Toto neni ta
Can i fit a miniblock lipol in it?
pribor_333 probably but it depends on the dimensions.
Gave it a shot... Couldnt get over the creepy eyes.
Can I get where to buy link? Also your mic is too soft. When you shot it my ears were hurt. Rip
7.4v li-po ?
Yes mate, 1600mah 25c is the one I used.
@@BIGBIRDSAIRSOFT yo if I use a 8,4v is it good ?
@@AZ2UR1X_QC it will be okay but l prefer 7.4 liPo
@@BIGBIRDSAIRSOFT okay thx bro
you need more subs
South Park?
david guetta?
Tutu budem mat
i can hear south park in the background lol.
Lol yeah, I always have something on in my room but turn it off when I’m speaking. This time I totally forgot. This week, it’s Rick and Morty lol
@@BIGBIRDSAIRSOFT nah it's fine I love your vids. Was gonna buy the specna e05 cause it was on sale but it's sold out :(
For a first gun.mp5 or specna!!.
(Great review 👍)
Karl Roadie it really comes down to details. The Cyma is cheaper than even the Specna Core series and so are the magazines. However, the Specna has some nice addition. It’s AR/M4 based so there is a mountain of accessories and upgrades such as hop units etc. they have a quick change spring gearbox (that’s only good if you work on them really) and usually a rail system dependant on the model. Not forgetting nearly all tactical gear is set up for AR mags.
The MP5 is awesome because it’s not an M4! Lol.
You’ll be good with earthier and a lot is to do with which you like the look of but, honestly, the Specna’s are hard to beat for value. Just makes sure you get the gearbox checked, greased and shimmed.
BIGBIRDSAIRSOFT thanks for info I am looking more to spencna for ability to upgrade parts.👍
👍 you can do a lot with them. Everyone thinks my 416 is a high end gun but I’ve just done lots to it.
BIGBIRDSAIRSOFT have bought a specna sa-eo1and fitted red scope and looking to get a pts stock.happy with purchase 👍
BZTACTICAL.CO.UK have the ICS l85s
a piece of bullshit (game toy) , I’ve been expecting a weapon …
Hey man, that nozzle you put in.. It looks like SHS M4 nozzle.. 21.4mm - is that right?
not sure if you mentioned it in the video, if I missed it my bad. However do you have any idea what handguards are compatible with cyma mp5? does realsteel fit?
I’ve tried literally only tried an SRC hand guard, and that fits but sorry, I haven’t tried any others.