Great channel. I have my own locksmith shop in rio grande do sul brazil, and i am going to the USA at the end of the year, is it possible to get work in a locksmith shop like yours to start and have experience with north american services?
@heath mcdonald then you employ a locksmith who supplies good quality ones. I only supply those which meet basic insurance standards and 95% of those I replace don't, so what would be the point of rekeying them? Just fit a better one in their place...
Because saving a client $30-$150 by repairing their existing lock can lead to better jobs down the line. Most locksmiths work with property management firms and realtors, replacing every lock every time a spring is broken is not sustainable. As soon as you run into a property manager who knows you could have just rekeyed their apartment building instead of trying to sell them all new locks for 20+ doors you just lost a client. Except not only did you just lose a client, that guy is now going to bad mouth you to all their friends about how you're ripping people off. You have no idea who the person on the other side of the door knows, and the locksmith trade is a largely word of mouth profession. Be honest, work with integrity, there is no room for crooks in the security industry.
@@deadhammerwow $150..?!! 😮😮😮 That's £112 (GBP) - locks must cost a lot more over there..! The typical locks I supply here in the UK, vary from £25 to £60 (retail) and I only supply the medium to high end locks - most of my competitors would supply locks valued at half that price and I know I lose a lot of work because people would rather pay less than I charge, but at the end of the day, you get what you pay for. As for property management companies, they would only pay for medium range locks, they wouldn't entertain the more expensive ones. I carry the equipment to rekey the locks I supply if the customer wants keyed alike or at a push, I could build a basic master keyed suite, but it would be easier and fairly cheap, to buy a suite from my supplier if there was no massive rush for it. Another reason I would always prefer to replace, rather than rekey, is because I offer a 12mth guarantee on everything I supply (up to 2yrs, I will normally replace the product FOC, but charge labour) and I wouldn't put a guarantee on any lock that wasn't new. Most of the locks I replace are crap quality, usually fitted by a handyman or builder, for whom a lock is a lock - quality and spec are far less important to them that price or availablity.
@@hairychris71 that's in CAD not USD, which would be about £86. Over here we do quite a lot of Mul-T-Lock and Assa for apartment towers. Our Mul-T-Lock 7x7's are about £55, and the Assa NW4s are closer to £100. To be honest we're actually one of the cheaper companies around too. There are still plenty of standard Schlage, Weiser, and Kwikset jobs where a new cylinder is £15 or so, but you still end up needing to rekey it so they only have one set of keys to worry about. The difference in profit is so minimal there is just no point in throwing out a perfectly good lock. However, our rekey fee for Mul-T-Lock and Assa is about £10, so when you go to the client and say I can rekey eight doors for £80 and a £45 service call, or sell you all new cylinders for £440 for Mul-T-Lock or £800 for Assa plus labour, its an obvious choice what you're going to do.
You are doing your customer a disservice by replacing a lock that does not need replacing. If you think that making a higher profit in the short term should be your only consideration, you’ll find an increasingly shrinking market for your services as a parts changer.
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
I would trust this guy. I am 18 years a locksmith and I only trust myself (normally)
U seem more like a honda guy...
i obviously learned a lot by watching this video, obviously.
Obviously this guy likes the word Obviously.
Great channel. I have my own locksmith shop in rio grande do sul brazil, and i am going to the USA at the end of the year, is it possible to get work in a locksmith shop like yours to start and have experience with north american services?
Obviously a very good video...
lmao exatly
Obviously this is a good video
Obviously
Lmao the amount of times he says obviously
You could tell the poor guy was nervous..............
Obviously.
This dudes fave word... 'obviously' - obviously
Yo, everyone obviously chill !!!! He’s obviously nervous.
Like, obviously.
this guy obviously likes the word obviously because he obviously is using the word obviously alot....obviously.
It's not obvious !
Obviously... lol
Take a shot for every "obviously" XD
Obviously
Obviously says obviously a lot obviously
We do break ins….
Why repair, change pins?? Just replace the thing , it’s one screw and take like 10 seconds, easy £125-£150.
@heath mcdonald then you employ a locksmith who supplies good quality ones.
I only supply those which meet basic insurance standards and 95% of those I replace don't, so what would be the point of rekeying them? Just fit a better one in their place...
Because saving a client $30-$150 by repairing their existing lock can lead to better jobs down the line. Most locksmiths work with property management firms and realtors, replacing every lock every time a spring is broken is not sustainable. As soon as you run into a property manager who knows you could have just rekeyed their apartment building instead of trying to sell them all new locks for 20+ doors you just lost a client. Except not only did you just lose a client, that guy is now going to bad mouth you to all their friends about how you're ripping people off. You have no idea who the person on the other side of the door knows, and the locksmith trade is a largely word of mouth profession. Be honest, work with integrity, there is no room for crooks in the security industry.
@@deadhammerwow $150..?!! 😮😮😮
That's £112 (GBP) - locks must cost a lot more over there..! The typical locks I supply here in the UK, vary from £25 to £60 (retail) and I only supply the medium to high end locks - most of my competitors would supply locks valued at half that price and I know I lose a lot of work because people would rather pay less than I charge, but at the end of the day, you get what you pay for.
As for property management companies, they would only pay for medium range locks, they wouldn't entertain the more expensive ones.
I carry the equipment to rekey the locks I supply if the customer wants keyed alike or at a push, I could build a basic master keyed suite, but it would be easier and fairly cheap, to buy a suite from my supplier if there was no massive rush for it.
Another reason I would always prefer to replace, rather than rekey, is because I offer a 12mth guarantee on everything I supply (up to 2yrs, I will normally replace the product FOC, but charge labour) and I wouldn't put a guarantee on any lock that wasn't new.
Most of the locks I replace are crap quality, usually fitted by a handyman or builder, for whom a lock is a lock - quality and spec are far less important to them that price or availablity.
@@hairychris71 that's in CAD not USD, which would be about £86. Over here we do quite a lot of Mul-T-Lock and Assa for apartment towers. Our Mul-T-Lock 7x7's are about £55, and the Assa NW4s are closer to £100. To be honest we're actually one of the cheaper companies around too. There are still plenty of standard Schlage, Weiser, and Kwikset jobs where a new cylinder is £15 or so, but you still end up needing to rekey it so they only have one set of keys to worry about. The difference in profit is so minimal there is just no point in throwing out a perfectly good lock. However, our rekey fee for Mul-T-Lock and Assa is about £10, so when you go to the client and say I can rekey eight doors for £80 and a £45 service call, or sell you all new cylinders for £440 for Mul-T-Lock or £800 for Assa plus labour, its an obvious choice what you're going to do.
You are doing your customer a disservice by replacing a lock that does not need replacing. If you think that making a higher profit in the short term should be your only consideration, you’ll find an increasingly shrinking market for your services as a parts changer.
Pls and pls it's my job for more than 15 years, I can for my ticket and everything
Obviously