I don't usually comment, but this video is great. Super straightforward and to the point. Makes something that seems daunting much more simple. Thanks!
Jorrick , I am still laughing. Thank you for that comment. I also would like to add - that’s what she said… All seriousness, this is a fantastic video and helped me a ton. Guy is a good speaker and very thorough
Very nice Crutchfield. You didn't have to do that, but it's a great, relatable way to connect with your customers and to help them out. If more organizations did things like this, they'd find that they would actually build more loyalty to their brand by connecting with people. Great, simple instruction - nice job overall. RL
Thank you for your kind words! We are always looking for ways to engage with our customers, and pass along any knowledge or info that could be beneficial! Let us know if you ever need anything!
Exactly what I was looking for! I was almost ready to have someone come out and move my rear speakers (Infinity CS 60) from up high to lower in the wall to be inline with seated position. Then this video showed the directional twitters, which the Infinity has, and I was able to simply remove the grills and point the twitters down to the center of the living room. Cool stuff! Many thanks for producing these videos.
Thanks so much for this. Very helpful for me. I look forward to receiving my Polk 6 1/2 inch speakers sometime next week! I feel much more comfortable about doing it myself now.
Great video. You make it look so easy. How far must the sofa be from the wall? How many feet away? Also what is the height that the in-wall speakers must be installed?
Hi Georgi, there will be multiple answers to these questions, depending on the gear you're using. Please get in touch, we will be able to help. www.crutchfield.com/I-rYTVc164/contact
The only potential issue I can see being an issue is if the speaker was installed so close that the rotating cams (or fingers) cannot extend out like they need to because you are that close to the stud. Just be mindful of their installation and as long as the speaker can be properly installed, then it can be close to the stud
Very complete instruction,....except at the end. I would like to know how to remove the grill, if I ever have to. Does it take a special tool, that might be included in the speaker kit?
Much depends on the specific speaker model and how the manufacturer has designed the grill to attach. Most are magnetic while others secure to the speaker frame. None of the models we currently offer require any "special" tools for removal. For additional assistance and personalized recommendations, feel free to contact us directly: bit.ly/2jBGHPp Hope that helps, --Crutchfield
If we have our new construction home pre-wired for speakers, it will have a plastic box with wires attached to the stud which doesn't allow you to leave a 2" gap from the studs. How do you adjust your installation in that scenario?
We would recommend getting in touch with a member of our AV Design Team. You can follow this link to leave a request for contact. www.crutchfield.com/I-rYTVc164/Institutional/diy.aspx
I guess I'm just looking for a wishful solution and I kind of already know there's no real solution but maybe you guys will have some different insight. What if the reciever is about 6 stud bays over, is there anyway to run that wire with zero attic access and without any extra drywall damage. Since a 6ft. drill bit is out of the question, i'm out of options. Any ideas? Thanks.
Hi! We would not suggest this type of installation. If you would like to speak with an Advisor, we will be happy to help you find the best speakers for an in-wall setup, along with the proper power supply for the speakers. www.crutchfield.com/I-rYTVc164/contact
Is it better for sound to keep the cloth out? The ones I have are very thick cloths on the grills. I'm sure they are acoustically transparent, but thought the sound would be better without them. Any harm in that?
I need to install an in-wall center channel speaker over a wall stud. The wall stud sits at the center of the speaker and will need to be notched in order to accomodate the speakers depth of 2-3/4" minus 1/2" for the drywall thickness. The stud that needs to be cut is 1 of 3 studs that work to hold up the 100 lb. TV. Will the stud need to be reinforced after cutting the 6" x 2-1/4" notch out of it?
A dedicated in-wall center channel should be made to fit between standard wall studs and not require any modifications to any studs (such as you've described). We would not recommend using any speaker that would require this. For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: bit.ly/2jBGHPp Hope that helps. --Crutchfield
Believe me when I say that I have thought about placing the speaker between the studs. That would be the easiest answer if it were the only consideration but unfortunately, there are other factors. The speaker is part of a matched set with the the left and right speakers already in the wall and the two surround speakers already flush mounted in the ceiling. With the center speaker being almost 14" long, it would require shifting it approximately 9" to the left or right to position it between two studs. With that shift, I would also have to remove the current speakers from the wall and ceiling along with the current wall plate, repair the drywall and reinstall everything into the new position before shiting my home theater furniture over to re-center it between the new speaker locations. With a shift to the right, my seats are against a wall and with a shift to the left, my seats are blocking an open walkway. What would you recommend under the current circumstances?
Nice video, but you forgot to mention the most important thing.... please run the speaker wire first and connect it to the speaker before putting the speaker on the wall.
@@crutchfield Thank you. I am not sure yet as I am not skilled enough to check what's behind. I was hoping bluetooth but not sure if that's feasible. The previous owner isnt being too helpful
That can take some extra time to explore. Once you find out what you have for power reach back and we can recommend some options for connecting Bluetooth or WiFi to the current setup.
So i used a drill on the lowest setting to secure my speakers. However, it still over tightens the dog legs/wall clamps and cracked them. I can't find any replacement dog legs/wall clamps. Any idea where i can find them or a substitute so I can install my speakers?
I'm not aware of any universal replacements for the dog legs. You might try contacting the manufacturer if you haven't already. If you purchased the speakers from Crutchfield you can contact our tech support for further troubleshooting or warranty claim - their information is located at the bottom of the invoice or in your account.
I have paper backed fiberglass insulation in my wall. Do I need to remove the insulation in the same size template as the hole? or simply compress it down as I mount the speaker in front of it?
It might depend on the speaker you are installing and what kind of back-box (if any) it has You don't want fiberglass to get into the back of your speaker so you want to make sure you have a nice buffer Our tech support can walk you through installation for any speakers purchased from Crutchfield. If you need help picking speakers you can connect with a product advisor here: bit.ly/2DGSzu3
We would recommend using an in-ceiling speaker for your installation, instead of an in-wall option. Please chat with an Advisor online or by phone, we will be happy to make a recommendation for you with the gear that would work best for your application, as well as answer any questions you may have. www.crutchfield.com/I-rYTVc164/contact
Hi Jason, The Polk Audio RC85i, is ideal for stereo music or the left and right front or surround channels of a home theater. If you'd like to check out other in-wall speakers that would best suited for use as a center channel, feel free to get in touch! www.crutchfield.com/I-rYTVc164/contact
They should be able to be pulled back away from the wall or pried out of the grooves that are currently holding it in place. When trying to pry it loose, be sure to use something that is not likely to scratch the grille.
The speaker doesn't require anything behind them. But if you do need to install insulation for climate control purposes, it's best to either use a closed back in-wall speaker or install a wall box to keep the insulation particles off the speakers. --Crutchfield
We have a wide selection of in-wall speaker models and consider them all to be very high quality. For personalized recommendations, feel free to contact us directly by phone or through our online chat service: bit.ly/2jBGHPp Hope that helps.--Crutchfield
If you are asking what is needed to power in-wall speakers, then we are happy to say they are typically powered by receivers and integrated amps. You can find them here: www.crutchfield.com/I-rYALc227/m_10400/Receivers-Amplifiers.html
l hate electronic stud finders. l have never had goo luck with those things. l usually use a hard drive magnet and that works pretty well. but one time l was helping a friend hand a TV and he had one and wanted to use it. and l have to tell you we must have put 10 holes in the wall before we found a stud with that stupid thing.
This is one of the most simple but detailed youtube videos out there.. Thank you!!
I don't usually comment, but this video is great. Super straightforward and to the point. Makes something that seems daunting much more simple. Thanks!
Thanks Cody! We try to demystify things and help DIYer's succeed
Jorrick , I am still laughing. Thank you for that comment. I also would like to add - that’s what she said…
All seriousness, this is a fantastic video and helped me a ton. Guy is a good speaker and very thorough
Very nice Crutchfield. You didn't have to do that, but it's a great, relatable way to connect with your customers and to help them out. If more organizations did things like this, they'd find that they would actually build more loyalty to their brand by connecting with people. Great, simple instruction - nice job overall. RL
Thank you for your kind words!
We are always looking for ways to engage with our customers, and pass along any knowledge or info that could be beneficial!
Let us know if you ever need anything!
Exactly what I was looking for! I was almost ready to have someone come out and move my rear speakers (Infinity CS 60) from up high to lower in the wall to be inline with seated position. Then this video showed the directional twitters, which the Infinity has, and I was able to simply remove the grills and point the twitters down to the center of the living room. Cool stuff! Many thanks for producing these videos.
Great video! Bought all my Polk speakers from you and was excited to see a Crutchfield video with helpful install tips. Thank you!
Thanks, John!
Watched this right before installing my own. Couldn't have been easier. Thanks!
Glad we could help David!
Thanks so much for this. Very helpful for me. I look forward to receiving my Polk 6 1/2 inch speakers sometime next week! I feel much more comfortable about doing it myself now.
I do not have a wall speaker at all but found this video informative.
Great video. You make it look so easy. How far must the sofa be from the wall? How many feet away? Also what is the height that the in-wall speakers must be installed?
Hi Georgi, there will be multiple answers to these questions, depending on the gear you're using.
Please get in touch, we will be able to help.
www.crutchfield.com/I-rYTVc164/contact
4 yrs later and I'm only focusing on the wire mess behind him. Jeez 🤣🤣🤣 Good vid
Great video Norm! Thanks for all the fantastic information!!
Very good info. I'm glad you covered the painting part of it also.
Great video! Now how to wire the sucker...that's the true challange
Chase Meyermann trolls never stop.
Here you go: ruclips.net/video/0vtaHpRITvo/видео.html
Will it be trouble to cut the hole really close to the stud ? Electrician made a hole on the stud.
The only potential issue I can see being an issue is if the speaker was installed so close that the rotating cams (or fingers) cannot extend out like they need to because you are that close to the stud. Just be mindful of their installation and as long as the speaker can be properly installed, then it can be close to the stud
@@crutchfield Is that normal there's a gap between the stud and the dry wall ? I'm able to put 1 finger between them. Thank you
Typically, no. The drywall is usually secured to the stud with no space in between them
Great video! How would one take the grill off?
Polk recommends removing the grille on this model by carefully hooking it with a bent paper clip and pulling it gently from the frame.
Great explanation and easy to follow.
Thank you!
Words to live by, "When you're just outside the hole. Smack it again!"
Very complete instruction,....except at the end. I would like to know how to remove the grill, if I ever have to. Does it take a special tool, that might be included in the speaker kit?
Much depends on the specific speaker model and how the manufacturer has designed the grill to attach. Most are magnetic while others secure to the speaker frame. None of the models we currently offer require any "special" tools for removal.
For additional assistance and personalized recommendations, feel free to contact us directly:
bit.ly/2jBGHPp
Hope that helps,
--Crutchfield
If we have our new construction home pre-wired for speakers, it will have a plastic box with wires attached to the stud which doesn't allow you to leave a 2" gap from the studs. How do you adjust your installation in that scenario?
We would recommend getting in touch with a member of our AV Design Team. You can follow this link to leave a request for contact. www.crutchfield.com/I-rYTVc164/Institutional/diy.aspx
simply amazing!! I really enjoy this video.
Thank you! So glad you liked it! 😊
One question, how do you go about knowing the depth in the wall to ensure the speakers you will actually fit in?
Thank you for the video but most important for the painting tip!!!
I bought 3 Polk audio speakers (2) 265-RT L/R and (1) 255C-Rt - what is the proper mounting height for each?
Hi Norman , how do you install the wall in speakers if there is no Dog ear on speakers
I'd guess they have a different name for the dog legs or require access to both sides of the wall during installation. Which ones do you have?
I guess I'm just looking for a wishful solution and I kind of already know there's no real solution but maybe you guys will have some different insight. What if the reciever is about 6 stud bays over, is there anyway to run that wire with zero attic access and without any extra drywall damage. Since a 6ft. drill bit is out of the question, i'm out of options. Any ideas? Thanks.
Do you think it would work if I were to buy car speakers, and place them in the wall? And connect it to an amp also in the wall?
Hi!
We would not suggest this type of installation.
If you would like to speak with an Advisor, we will be happy to help you find the best speakers for an in-wall setup, along with the proper power supply for the speakers.
www.crutchfield.com/I-rYTVc164/contact
Is it better for sound to keep the cloth out? The ones I have are very thick cloths on the grills. I'm sure they are acoustically transparent, but thought the sound would be better without them. Any harm in that?
....and make sure you connect the wires before you tighten the brackets that secure the speaker in the wall. Just a small detail that was left out.
Wonderful and detailed video presentation
I need to install an in-wall center channel speaker over a wall stud. The wall stud sits at the center of the speaker and will need to be notched in order to accomodate the speakers depth of 2-3/4" minus 1/2" for the drywall thickness. The stud that needs to be cut is 1 of 3 studs that work to hold up the 100 lb. TV. Will the stud need to be reinforced after cutting the 6" x 2-1/4" notch out of it?
A dedicated in-wall center channel should be made to fit between standard wall studs and not require any modifications to any studs (such as you've described). We would not recommend using any speaker that would require this.
For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service:
bit.ly/2jBGHPp
Hope that helps.
--Crutchfield
Believe me when I say that I have thought about placing the speaker between the studs. That would be the easiest answer if it were the only consideration but unfortunately, there are other factors. The speaker is part of a matched set with the the left and right speakers already in the wall and the two surround speakers already flush mounted in the ceiling. With the center speaker being almost 14" long, it would require shifting it approximately 9" to the left or right to position it between two studs. With that shift, I would also have to remove the current speakers from the wall and ceiling along with the current wall plate, repair the drywall and reinstall everything into the new position before shiting my home theater furniture over to re-center it between the new speaker locations. With a shift to the right, my seats are against a wall and with a shift to the left, my seats are blocking an open walkway. What would you recommend under the current circumstances?
I have a question. Can you install a "in wall speaker" in a concrete wall?
this is less than ideal, but theoretically.
Nice video, but you forgot to mention the most important thing.... please run the speaker wire first and connect it to the speaker before putting the speaker on the wall.
I bought a house with in-wall speakers. Anny idea as to how I would connect my phone to them?
Congrats on your new home! What is being used to power the speakers? How are you hoping to integrate them specifically with your phone?
@@crutchfield Thank you. I am not sure yet as I am not skilled enough to check what's behind. I was hoping bluetooth but not sure if that's feasible. The previous owner isnt being too helpful
That can take some extra time to explore. Once you find out what you have for power reach back and we can recommend some options for connecting Bluetooth or WiFi to the current setup.
Best video, thank you very much!
You're welcome!
@@crutchfielddo you think is a good ideia to put rock/glass wool around the equipment ? It will improve?
So i used a drill on the lowest setting to secure my speakers. However, it still over tightens the dog legs/wall clamps and cracked them. I can't find any replacement dog legs/wall clamps. Any idea where i can find them or a substitute so I can install my speakers?
I'm not aware of any universal replacements for the dog legs. You might try contacting the manufacturer if you haven't already. If you purchased the speakers from Crutchfield you can contact our tech support for further troubleshooting or warranty claim - their information is located at the bottom of the invoice or in your account.
@@crutchfield Thanks for the reply. I did end up contacting Polk Audio and they are sending replacement parts.
I have paper backed fiberglass insulation in my wall. Do I need to remove the insulation in the same size template as the hole? or simply compress it down as I mount the speaker in front of it?
It might depend on the speaker you are installing and what kind of back-box (if any) it has You don't want fiberglass to get into the back of your speaker so you want to make sure you have a nice buffer Our tech support can walk you through installation for any speakers purchased from Crutchfield. If you need help picking speakers you can connect with a product advisor here: bit.ly/2DGSzu3
Thanks. Can this be installed on the ceiling?
We would recommend using an in-ceiling speaker for your installation, instead of an in-wall option.
Please chat with an Advisor online or by phone, we will be happy to make a recommendation for you with the gear that would work best for your application, as well as answer any questions you may have.
www.crutchfield.com/I-rYTVc164/contact
@@crutchfield thanks
outstanding tutorial.
Thanks! It's great to hear that you found it helpful!
Would be good to turn the tweeter a little bit just to show how it works. But nobody's perfect (c) Great video! Thank you.
Thank you, Konstantin!
Can you use rc85i polk speakers as a center channel?
Hi Jason,
The Polk Audio RC85i, is ideal for stereo music or the left and right front or surround channels of a home theater.
If you'd like to check out other in-wall speakers that would best suited for use as a center channel, feel free to get in touch!
www.crutchfield.com/I-rYTVc164/contact
You made a very helpful video
Great video! Thank you
Thank you very much sir. Much appreciated!
how do you remove the grill?
They should be able to be pulled back away from the wall or pried out of the grooves that are currently holding it in place. When trying to pry it loose, be sure to use something that is not likely to scratch the grille.
Thanks brother very well explained
You're welcome! We are glad it helped
Should you insulate behind the speaker?
The speaker doesn't require anything behind them. But if you do need to install insulation for climate control purposes, it's best to either use a closed back in-wall speaker or install a wall box to keep the insulation particles off the speakers.
--Crutchfield
Excellent step by step!
Glad you enjoyed it!
Great video. What speakers do you recommend for sound sound?
We have a wide selection of in-wall speaker models and consider them all to be very high quality. For personalized recommendations, feel free to contact us directly by phone or through our online chat service: bit.ly/2jBGHPp Hope that helps.--Crutchfield
hinged swivel for connoisseurs and rearrange
how can i set one up?
If you are asking what is needed to power in-wall speakers, then we are happy to say they are typically powered by receivers and integrated amps. You can find them here:
www.crutchfield.com/I-rYALc227/m_10400/Receivers-Amplifiers.html
Very clear instructions.
Nice video
Now how do you run the wire :P
No one seems to show the most important part, they promise it in the beginning...but ehh lol
It’s 2 wires ....black/black red/red if you can’t wire it you probably shouldn’t be installing speakers yourself anyway .
@@nmore69 Ok thats obvious, but he didnt explain which power source he was tapping, how he ran the wire through the wall so forth n so forth..
No back box for the speaker..???
The need for the back box would depend on the model and specific installation.
nice job and thank you!
You didn't talk about an exterior wall where there will be a vapour barrier as well as insulation. Show us that.
Ok boss man. Anything else....wtf.
I'd have a beer with this dude.
Thanks for the video!
Great video!
Great video
amazing video....
Thanks you.
Installing in-wall speaker on concrete walls ruclips.net/video/s_XmGR_HUcA/видео.html
by the way , Good job
What about wiring?
Wiring will be different in almost every scenario. Did you have more specific questions about wiring in wall speakers?
l hate electronic stud finders. l have never had goo luck with those things. l usually use a hard drive magnet and that works pretty well. but one time l was helping a friend hand a TV and he had one and wanted to use it. and l have to tell you we must have put 10 holes in the wall before we found a stud with that stupid thing.
I'd never use a powered driver on those.
Our houses are made of bricks ;)
thanks for the video, but you forgot to connect the cables lol
No respect I tell ya. He gets no respect.
Do you leave the cloth on if you are not painting it ?
Yes you would probably still want the grill on to protect the speaker.
Awesome video
Thank you, Reed. 🙂
Great video, thanks so much