I have a 2019 f 250 I was watching your video you claim that 22x12-44 works without having to lift it just with the 2.5 inch leveling I would like to be able to talk to you
Looks good keep, keep in mind the front will lower in time the new springs will compress you will lose anywhere from A half-inch to a full inch as your new spring settle in.
I’m running a 4” BDS kit on 20x10s w/ -24 offset on some 37x13.5’s and I had to trim a bit. Not as much as this rig, but slightly on the valance and just a hair inside the fender well.
@@swashington942 what are you 20? Just bought your first diesel pickup and putting your $6,000 lift kit in? Take it from a “Karen” that’s already done all that shit and save that money for something else that doesn’t make your pickup bounce and wander all over the fucking road. Or you can be one of the idiots we see in the ditch every summer with his truck and trailer on their sides.
@@robertwilliams7188 because I did and my truck never did tow well afterwards. My biggest regret on that truck was adding the Bilstein levelling kit. Took it to 4 different shops afterwards trying to fix the alignment and although it handled well by itself… the minute I hooked up our 35 foot bumper-tow travel trailer (11,000lbs) it turned into an unstable death trap…. even with the stabilizer bars attached. Before the levelling kit, that truck towed that same trailer perfectly…. even without the stabilizer bars!
2017 is one of my favorite Fords. They look good. I think they look better than 2020.
Do the upgrades cancel out the factory warranty?
Dude that truck is a beast
I installed this level kit on my 19' 250 in my driveway. Super simple and makes the truck look awesome can't wait to throw some 37's on it.
Can the 2.5" lift kit c/w 37x12 tires on 22" rims fit the new 2021 F250 platinum tremor and will it void my warranty?
I have 35x12.5 on 22x12’s on my 21 tremor, leveled 2.5”. Have to cut a small piece in rear inner fender. No wheels don’t void warranty
What kind if wheels are these ? They look great 👍
I have a 2019 f 250 I was watching your video you claim that 22x12-44 works without having to lift it just with the 2.5 inch leveling I would like to be able to talk to you
Hell yeah Corey, looks sick. Love the content and I look forward to being a customer at the new place!!
Been following for about 3 months love your RUclips channel. Always look forward to see what you're going to do next.
Looks awesome man nicely done
Well … that’s perfection 👍
Bro that’s nice asf
Looks great
Absolutely badass!!
Can you post the front measurement from ground to top of bumper. Mines 34 1/2 on 2017 super duty with level. Trying to do same setup thx
That thing is dumb clean! Good work dude
Just for info summer starts June 21. Truck does look good 👍
What kind of wheels were those?
I got the same color scheme, love the look!
Very nice. However, if you did a 4 inch lift you could have put on 38's with clearance for days.
You used a 13.5 width tire....if you used a 12.5 do you think you would still have to trim?
with a 37" on just a leveling kit. Yeah probably
Looks good keep, keep in mind the front will lower in time the new springs will compress you will lose anywhere from A half-inch to a full inch as your new spring settle in.
No dude. When you put a leveling kit it just adds a puck to top of spring. Spring will not settle and lose height. Moron
35s would have been gtg
Why would you not do a 3.5 ready lift, comes with the rear block to sit level
Need to bring mine by for some fender flare trimming
what brand wheels are those ?
Hey can those 22s fit on 37x12.5 126q?
Looks bad ass
Do your Stage 2 kits apply to the 2020? It says 17+, so I'm inclined to say yes. But I wanted to check as the 2020 is different.
Did you find out?
Paint match bumpers and take off step
How about the bumper spacer giveaway? I could use those!!!
Damn straight
Do the upgrade kits work for the 2020??
Ver very nice
Just swap out the rear f250 block with a F350 SRW block and you’re done Corey it’ll be exactly 1.5inch taller in the rear over stock..
What year is this ford f250 ?
Is that a 2020? Where’s y’all get the delete kit from?
2017 sir
Looks good
Looks awesome
What do you gotta do to win the bumper spacer got a platinum with a 4” lift with the same size wheel and tire set up
Your running a 4” on 12 wide and -44 offset. With 37”. Do you rub at all or have to trim
I’m running a 4” BDS kit on 20x10s w/ -24 offset on some 37x13.5’s and I had to trim a bit. Not as much as this rig, but slightly on the valance and just a hair inside the fender well.
What kind of wheels are those
Shop around, you can find that leveling kit for much cheaper.
Wear a mask! My Native American people are dropping like flies because of it.. stay safe. Love the content!! 😎👌💯
Truck looks great! Are you going to be restocking the shirts on your site?
4” blocks sits level 5” will give a little rake I did mine same way
🥳
Went with the 20x12 -44 on my ‘16 and had to trim the bumper bracket since I didn’t win the bumper spacer lol
wish i had your kind of money
it kind of looks like the front tires stick out more than the rear
looks good!
Looks nice, however not my cup of tea!!! tires stick'n way too far. Cops would be on me like white on rice!!!
Rambling as usual!!!
I’m about to be done with RUclips!
I don't like it when you guys make it easy on yourself and start taking short cuts , okay if it's your own truck.
Nices truck yours need to be washed
If you like the way your new pickup drives, steers or goes down the highway with a 35 foot travel trailer..... don’t do this!
Calm down Karen
@@swashington942 what are you 20? Just bought your first diesel pickup and putting your $6,000 lift kit in? Take it from a “Karen” that’s already done all that shit and save that money for something else that doesn’t make your pickup bounce and wander all over the fucking road. Or you can be one of the idiots we see in the ditch every summer with his truck and trailer on their sides.
Why
Why
@@robertwilliams7188 because I did and my truck never did tow well afterwards. My biggest regret on that truck was adding the Bilstein levelling kit. Took it to 4 different shops afterwards trying to fix the alignment and although it handled well by itself… the minute I hooked up our 35 foot bumper-tow travel trailer (11,000lbs) it turned into an unstable death trap…. even with the stabilizer bars attached. Before the levelling kit, that truck towed that same trailer perfectly…. even without the stabilizer bars!
Looks like shit.. Offset is way to aggressive. I think 37s on 20s with a flush offset is the way to go.
No 4x4 should be running 22s with pinner tires
your right, should of went with 15s
Tires stick out to much
I dont know why guys like to ruin a good pickup like that with those ridiculous wheels.
DB, it's there $$ you know!!
80-90k truck for show. 1000k payment a month for 7 years and still live with their Mom.
@@jhart1352 can’t be a hater your whole life lol
Dude 12 wide 37's on a 4 in still rub theres now way this is driveable
Shop around, you can find that leveling kit for much cheaper.