This young man is so humble. It’s a pleasure to watch him work in such a professional manner, as he is definitely the exception to the rule these days.
Great Job Caden, always a delight to see someone who takes pride in their work, and has attention to detail. Dave, he needs to stay at your shop for a long long time.
Diggin' Cadens attention to detail, marking all bolts after torquing to specs.... this shows a good mechanic. Wont be surprised if this young man is help running Dave's shop some day.
I noticed that others appreciated the mellow background music. Thanks for that. Of course the young man calmly and quietly doing his work was also nice
Man. I fully deleted my '15 GMC Denali 3500 Dually when she was brand spankin' new with less than 300 miles on the odometer. I had completely forgotten how much crap I had taken off of her Duramax till I watched this video. I need to do the CP3 upgrade on my truck. It would be a breeze compared to this since most of this stuff doesn't exist on my truck anymore.
Ok I'm not ashamed to say it but I was stoned when I first heard this. Holy hell! I'm not into talking in an ASMR video but with that background tone and then a random voice appears and it sends me somewhere! The greatest ASMR video EVER!
To see these young men do this work is impressive. Him and Alejandro Nice work . Ur an A tech u pulled that gmc apart with skills . Remember to stay cool and calm. Thanks for the video.
What an engine packaging nightmare! You have to admire the engineer(s) who designed this engine system and got it all in the allowed space (engine compartment), but when it comes time to make a repair ... wow! "Fleece" engine components! I'd have to think about changing the name to inspire customer confidence if I was them.
@@Torqu3d A play on words. "Fleece" is slang for : to deceive someone. I was kidding, it's an old term though that you youngsters may not be familiar with.
I find it quite ironic that the manufacturer of the replacement system is called Fleece. That's what it feels like sometimes when your vehicle is getting these repairs or upgrades. Then you watch the video and understand why. One clamp missed one bolt missed, and you're pulling that maze apart again on your dime. Great video and great work young man.
For anyone thinking about a cp3 swap. I would definitely recommend getting the tuned for the cp3. The cp4 puts out higher pressure and even doing a no tune swap you always have the chance of it running like crap, later requiring calibrations to run good.
Exactly like me at the ford dealership I was working at send it to the wash bay to clean the engine top and bottom the interior also sometimes some customers didn’t like the cost of it but I always answer before you go to the doctor to check your bottom you’ll take a shower 🚿 😅😊
@19:16 - I have the same FASS 150 lift pump I installed on my truck. I can tell you for a fact that by around 100k miles, those fuel lines will leak. If you are thinking about this upgrade, do yourself a favor, and ditch those hoses and spend the extra money on making some real braided steel lines and -AN fittings instead. That's one of the things I plan on doing this spring when I do the CP3 conversion. Just gotta make it through the winter when I do need to truck to get around instead of the Camaro, Chevelle, or one of the motorcycles.
Whoever invented vacuum sealing parts should be jailed! I'm home sick with COVID catching up on your videos. You guys are the new "Price is Right" (the older folks will get that reference). Hello from Atlantic Canada, thanks for the great content!!!
This kinda soft background music is fine. Its annoying some channels can't figure out how to temper the volume down and not make it obnoxiously loud for no reason whatsoever! Makes watching videos difficult when music is so loud you can't even hear whats going on. I'd much rather hear the shop sounds, tools doing their work, maybe not full bore 1\2" air impact gun wide open taking 16 lug nuts off but you know what I mean. Thanks for this video, he's awesome, especially for his age. I'm jealous, I wish I had this kind of experience at that age, I'd be rolling in dough by my age (47). Good thing this isn't getting the disaster pump Bosch CP4!👍🏻👌🏻💯🛠️🔩🔧🦺🛢️💨 ✊🏻🇺🇲🦅🇺🇲✊🏻
Buy a top side creaper that thing change my life 😂 i use it for everything bought two and put it each side of classe 8 trucks over the bumper while working into engines
Good Lord son I tip my hat once again to you and your qualities. Beyond amazing what y'all have to do in order to fix/work on these jigsaw puzzles. It's like watching a technician work on plumbing a Saturn 5 rocket and not a pickup! I am blown away by how complicated 😕 these modern power trains are and reminds me of many years asking engineers if they were serious 😳? Bravo young man Bravo 👏
I made a simple mod to get the fan and shroud easly - I cut the shroud horizontally in the middle, made a simple quick connect, now I just need to take the top half and can take the fan easly and most of the time, I don't need to take the bottom half out at all.
Hey Dave what are your thoughts on the new Banks oil pan for the Duramax? And while your pondering that how about the transmission pan he offers as well.
@TamagoHead I never heard of Banks until maybe couple of years ago watching others on RUclips install his stuff and they would rave about it. So I checked out his content and website and man the guy is a pure genius.
Great Job on everything, impressive to remember where/how it all goes back together. Are there protective covers for those low hanging filter? And, Had to cringe on using the Adjustable Wrench to tighten that last fitting...I know, I know but you know what I mean.
I think I have watched most of Dave's Auto Center Video's and I am or never was a mechanic but I love watching all the conquests the mechanics go through on each job. One thing that I keep wondering, is it safe to power wash your engine? It seems you guys have no problem doing it before most jobs. I have a new Denali Ultimate with the 6.2L engine. Is it safe to power wash the entire engine? Thanks and thanks for the great videos!
I love watching your videos but I don't think you need to branch into the ASMR market. I can't speak for everyone but I like for the mechanics to talk and explain while they're doing stuff. I'm not a mechanic but I can turn a wrench and I like it when these guys explain what's going on and why.
That shop has to make money. They are showing you shop life mostly. You really don't have time to talk when you have to get to the next job, focus and get one down and move on to the next
The last time i did one of these and i tried to sneak out that front egr cooler part it was a nightmare, wish i would have just taken the whole thing off😂
We all had pocket screwdrivers back in the 70s just like that. Service technicians, repairmen, mechanics, etc. Probably still have some out in my toolbox...
Is there a modification to make a modern diesel truck like a F-350 able to idle long periods? I know you can increase rpm but what do you do for egr contamination at idle?
The problem is, those who design them seldom, if ever, have to work on them. I used to roundly curse the engineers responsible for designing the Komatsu cranes I had to work on.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Best vid yet. No loud music no talking just work.
Agree, the music was horrendous
This young man is so humble. It’s a pleasure to watch him work in such a professional manner, as he is definitely the exception to the rule these days.
Dude no joke. We work th same. I always mark my work.
Great Job Caden, always a delight to see someone who takes pride in their work, and has attention to detail. Dave, he needs to stay at your shop for a long long time.
I admire Caden's capabilities, work ethic, and organizational skills. He approaches his job like a surgeon. Whoever taught him was a helluva mentor.
Diggin' Cadens attention to detail, marking all bolts after torquing to specs.... this shows a good mechanic. Wont be surprised if this young man is help running Dave's shop some day.
this is how videos should be.
no blaring music that is powering over the video.
calm music, cut throat scenes.
💯👍🏻
I want even sure I was hearing music on the background at first. This is the greatest video on YT!
I love watching someone who is a master of their craft!
Nice to see a professional.
Caden is an awesome mechanic! He needs a raise Dave.
I noticed that others appreciated the mellow background music. Thanks for that. Of course the young man calmly and quietly doing his work was also nice
Man. I fully deleted my '15 GMC Denali 3500 Dually when she was brand spankin' new with less than 300 miles on the odometer. I had completely forgotten how much crap I had taken off of her Duramax till I watched this video. I need to do the CP3 upgrade on my truck. It would be a breeze compared to this since most of this stuff doesn't exist on my truck anymore.
I know Alejandro wasent on the video but he is amazing at his craft. Also love to see smiling workers. U got a good team Dave.
Ok I'm not ashamed to say it but I was stoned when I first heard this. Holy hell! I'm not into talking in an ASMR video but with that background tone and then a random voice appears and it sends me somewhere! The greatest ASMR video EVER!
Excellent, love that you left the old slogan from Les Schwab "If we can't guarantee it, we won't sell it."
It's a job to remember how to put all that back together 🤯
Colored cups/tape😉
To see these young men do this work is impressive. Him and Alejandro Nice work . Ur an A tech u pulled that gmc apart with skills . Remember to stay cool and calm. Thanks for the video.
Much appreciated!
*Dave's Auto Center* Bravo bravo well done young man, thank-you Dave for taking the time to bring us along. GOD Bless.
What an engine packaging nightmare! You have to admire the engineer(s) who designed this engine system and got it all in the allowed space (engine compartment), but when it comes time to make a repair ... wow! "Fleece" engine components! I'd have to think about changing the name to inspire customer confidence if I was them.
The name Fleece is built on quality. Not really sure what youre talking about but anybody that knows performance knows the name Fleece as it is.
@@Torqu3d A play on words. "Fleece" is slang for : to deceive someone. I was kidding, it's an old term though that you youngsters may not be familiar with.
@@RonRussell-sj1zfbro just shut the fuck up. You failed miserably at commenting . Imbecile .
I find it quite ironic that the manufacturer of the replacement system is called Fleece. That's what it feels like sometimes when your vehicle is getting these repairs or upgrades. Then you watch the video and understand why. One clamp missed one bolt missed, and you're pulling that maze apart again on your dime. Great video and great work young man.
Dave please we need more videos like this and more diagnostic and troubleshooting videos please. We learn a lot from your videos.
Watching this video makes me appreciate my 7.3 even more.
Min 4:45…..I broke the silence and went to cussing that fan shroud 😜😂😜
Kudos to your videographer. The sound is amazing.
Dave, the "that was solid" is a kid proud of himself. I know you know from watching your videos. keep it up, you made a kid proud.
This kid is good. Very efficient and works clean. I loved how he cleaned the floor.
More of this , PLEASE
Specifically 2013 Ford escape transmission😊
Man I bet hotshot haulers all across the country could use a professional like this young man in the passenger seat 😂.
Love watching him work
For anyone thinking about a cp3 swap. I would definitely recommend getting the tuned for the cp3. The cp4 puts out higher pressure and even doing a no tune swap you always have the chance of it running like crap, later requiring calibrations to run good.
Exactly like me at the ford dealership I was working at send it to the wash bay to clean the engine top and bottom the interior also sometimes some customers didn’t like the cost of it but I always answer before you go to the doctor to check your bottom you’ll take a shower 🚿 😅😊
Between you guys and The Car Care Nut,professionals. Bravo,from Sherbrooke Quebec Canada
WOW!!! Dave, your luckey to have this guy, doesn't look like you need to train him up, good job everyone!!!
All I can say is "Totally Amazing".
Wow! Very impressive! Love watching your team work their magic.
Had the CP3 conversion done on my 2011 a few years ago before the cp4 failed. Also added a lift pump.
love the way this Guy works
I could go to sleep to this
Love from Sylhet Bangladesh 🇧🇩🇧🇩🇧🇩🥰🥰❤❤
@19:16 - I have the same FASS 150 lift pump I installed on my truck. I can tell you for a fact that by around 100k miles, those fuel lines will leak. If you are thinking about this upgrade, do yourself a favor, and ditch those hoses and spend the extra money on making some real braided steel lines and -AN fittings instead. That's one of the things I plan on doing this spring when I do the CP3 conversion. Just gotta make it through the winter when I do need to truck to get around instead of the Camaro, Chevelle, or one of the motorcycles.
gett some top side creepers for your guys dave
He Was Great In This Work !
I thought for a second I might be able to do this swap myself😅not after watching this
Haha I use the exact same drills. CTS861 drill head is so nice from snap on. Personally favorite is the screwdriver apex chuck variant.
And the mag boot for the battery. Can’t find them unless you search for them
So Glad my Cummins came with one from the factory!👍
Great Video, so peaceful, Thanks
Whoever invented vacuum sealing parts should be jailed! I'm home sick with COVID catching up on your videos. You guys are the new "Price is Right" (the older folks will get that reference). Hello from Atlantic Canada, thanks for the great content!!!
This kinda soft background music is fine. Its annoying some channels can't figure out how to temper the volume down and not make it obnoxiously loud for no reason whatsoever! Makes watching videos difficult when music is so loud you can't even hear whats going on. I'd much rather hear the shop sounds, tools doing their work, maybe not full bore 1\2" air impact gun wide open taking 16 lug nuts off but you know what I mean. Thanks for this video, he's awesome, especially for his age. I'm jealous, I wish I had this kind of experience at that age, I'd be rolling in dough by my age (47). Good thing this isn't getting the disaster pump Bosch CP4!👍🏻👌🏻💯🛠️🔩🔧🦺🛢️💨
✊🏻🇺🇲🦅🇺🇲✊🏻
The only thing better than watching Dave’s shop videos are watching Zeppelin videos with Jason on the drums doing Kashmir!!!
Amen! 👊🤘
Buy a top side creaper that thing change my life 😂 i use it for everything bought two and put it each side of classe 8 trucks over the bumper while working into engines
What an amazing video.
Nice tune.
Good Lord son I tip my hat once again to you and your qualities. Beyond amazing what y'all have to do in order to fix/work on these jigsaw puzzles. It's like watching a technician work on plumbing a Saturn 5 rocket and not a pickup! I am blown away by how complicated 😕 these modern power trains are and reminds me of many years asking engineers if they were serious 😳? Bravo young man Bravo 👏
Engine wash first, than take it a part. That is how I did it also back in the day also. I charge for the cleaning, for most it was the first time.
You got some skills kid.
I made a simple mod to get the fan and shroud easly - I cut the shroud horizontally in the middle, made a simple quick connect, now I just need to take the top half and can take the fan easly and most of the time, I don't need to take the bottom half out at all.
You going big places bro!! Keep up the good work!
Hey Dave what are your thoughts on the new Banks oil pan for the Duramax? And while your pondering that how about the transmission pan he offers as well.
Pretty sure anything Banks, he would approve.
@@bearing_aficionado yup! Banks stuff has been featured on Dave’s channel, and his products make sense.
@TamagoHead I never heard of Banks until maybe couple of years ago watching others on RUclips install his stuff and they would rave about it. So I checked out his content and website and man the guy is a pure genius.
Dave, give Caden a raise!
caden you the man!!
this was a good idea, i enjoyed 😂
My God thats a hell of aparts removal to do that job
Toughest part of the job was dealing with that packaging at 14:43
Great Job on everything, impressive to remember where/how it all goes back together.
Are there protective covers for those low hanging filter?
And, Had to cringe on using the Adjustable Wrench to tighten that last fitting...I know, I know but you know what I mean.
Great job, dude!
So relaxing 😊
I live 20 minutes from you guys and need some work done on my Audi RS5!! You could even make a video about it if you want to.
Therapeutic 😊
Great Job!👍🏻🇺🇲
Cannot believe you only took 21.37 minutes to change this out !!!
I say the same thing all the time.😂
Man you guys make the dealership I take my truck to look like a joke. Wish you all were local here in VA. Also, try and do that robot 🤖 you can’t.
I think I have watched most of Dave's Auto Center Video's and I am or never was a mechanic but I love watching all the conquests the mechanics go through on each job. One thing that I keep wondering, is it safe to power wash your engine? It seems you guys have no problem doing it before most jobs. I have a new Denali Ultimate with the 6.2L engine. Is it safe to power wash the entire engine? Thanks and thanks for the great videos!
very pleasant!
I love watching your videos but I don't think you need to branch into the ASMR market. I can't speak for everyone but I like for the mechanics to talk and explain while they're doing stuff. I'm not a mechanic but I can turn a wrench and I like it when these guys explain what's going on and why.
There’s plenty of videos of that for you to enjoy. Something different isn’t bad a lot of folks like these videos
That shop has to make money. They are showing you shop life mostly. You really don't have time to talk when you have to get to the next job, focus and get one down and move on to the next
Dave, this young man is gonna make you a shit load of money.
I put this on thinking it would be good to fall asleep to, ended up watching the whole thing intensely lmao
Great video. Just one tip for an even better ASMR video. Longer shots, less transitions.
The last time i did one of these and i tried to sneak out that front egr cooler part it was a nightmare, wish i would have just taken the whole thing off😂
The pocket screw driver from snap on is freaking magnetic on the handle that’s genius
We all had pocket screwdrivers back in the 70s just like that. Service technicians, repairmen, mechanics, etc. Probably still have some out in my toolbox...
thats how its done son...👌👌
Is there a modification to make a modern diesel truck like a F-350 able to idle long periods? I know you can increase rpm but what do you do for egr contamination at idle?
my 15 duramax is surging after a fleece cp3 conversion, i even bought everything they recommended to prevent surging, any advice would be appreciated
So how come he put oil in the fuel filter? Genuine question.
It was actually diesel fuel. He just had it in an oil container.
@@jimwhalen6769ohh okay i appreciate it, I was confused lol
Is there an Emmy for auto repair video production ?
Why did you remove the oil pan? Was it replaced or was it leaking?
The customer probably asked to have it checked
Noticed this is a Fleece cp3 conversation. What is the pros and cons vs. the S&S cp3 conversation?
Cp4 pump create disco party all the injectors invited
Awesome work . What does this conversion cost ? Ballpark
Hey are you guys doing a video on The Audi you did in the Shorts where timing problems/top end problems?
I prefer the mechanic to do some talk while fixing, like just to explain what is going on and such. Dave, where are you? 😂
Very nice upgrade to the truck . Everyone wants to know what the cost for this complete upgrade would be ?
Great mechanic. How long does the job actually take and what is the cost
Man I need this on my truck so bad. 150k still going
And people think that the cost of labor is too high…they should have to watch this video
Dont skip at all, but if you want to check if a technician is the real deal, skip to 8:25.
Where did get that tool to hold the cp3 gear in place to torque?
Come on Dave,buy the height over the engine laydown creeper.
How much was this project? Throw out some digits as a reference for everybody. We should all know that every project could have a different cost.
probably 5k.
@@steveww07 Then would be reasonable to save an engine.
The amount of disassembly for some of these upgrades is amazing. Engine designers should do better.
The problem is, those who design them seldom, if ever, have to work on them. I used to roundly curse the engineers responsible for designing the Komatsu cranes I had to work on.
Is it a great idea to power wash under the hood?
I was wondering the same thing. I’d never do it. It might not be high-psi water though, but the air dry helps a bit too.
Once H2O penetrates electrical connections, most likely too late for blow drying.
Do you guys wash every engine bay before you work on the vehicle? It’s a serious question I hope you guys answer.
Just wondering... with modern vehicles, isn't the power washing a potential problem for all the electronics under the hood?
How long did this job take?
👍fr toronto canada