Great video on upgrading the cooling system Robbie. It's turning out to be a good little printer just the cooling is the only real downside, so this is a very important video for the community.
Hi, I also have this printer and PLA in general is printed with no issues, but with PETG I'm having a lot of issues as it jams after 30 minutes. I have just ordered Capricorn tube to improve with temperatures and filament extrusion, any advice? Could you please share paremeters?
I have replaced my boden tube with capricorn for the extra heat. For Petg I run 238 extruder, 65 on the bed some times with a little bit of glue stick. Fan is normally on at second layer and between 70- 100 %.
Thanks for the video! Curious how are these to update the firmware? Can’t find any videos on that unfortunately. Will using a cura profile for an ender 2 with reduced dimensions work as the slicer ?
Great video on upgrading the cooling system Robbie. It's turning out to be a good little printer just the cooling is the only real downside, so this is a very important video for the community.
Thanks for the support, 👍
If you want high quality fans we stock 24V 5015 fans in our shop. Good video man!
Thanks Tim, I will be checking out your black Friday sales!
Thank you so much this video is very useful
Where is the heatsink fan connected? Mine seems to be occupied by the heatsink fan.
Try 12/24V port
I helped preformed this upgrade on a friend's 3d printer and the extruder fan now wont turn on. Any suggestions?
Great video thanks!
Great video
Hi,
I also have this printer and PLA in general is printed with no issues, but with PETG I'm having a lot of issues as it jams after 30 minutes. I have just ordered Capricorn tube to improve with temperatures and filament extrusion, any advice? Could you please share paremeters?
I have replaced my boden tube with capricorn for the extra heat. For Petg I run 238 extruder, 65 on the bed some times with a little bit of glue stick. Fan is normally on at second layer and between 70- 100 %.
Thank you very much, I will try those settings as soon as the Capricorn tube arrives.
Are you using the kingroon slicer? If so does it work with the part cooling fan? Thanks
I'm using simplify 3d but I don't see why it wouldn't work with the stock software.
Thanks for the video! Curious how are these to update the firmware? Can’t find any videos on that unfortunately. Will using a cura profile for an ender 2 with reduced dimensions work as the slicer ?
I installed this upgrade and when I go to print the main fan doesn't turn on, only the 5015. Does anyone have a tip/solution for it?
Did you check to make sure it's still connected and didn't get disconnected when installing the other fan?
Great video. Could you please provide the link to the .stl for the fangs?
Added the link
@@robbies3dprints496 Thanks! =)
anychance you can show where you the files because ive tried using the one from the facebook and it dosent fit
Added the link
Thanks a lot
Can you link 3d model, please?
Just added a link.