How to Replace Power Window Motor & Regulator Assemblies 1994-2004 Ford Mustang

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ib/1AWRG01274
This video shows you how to install new front power window motor & regulator assemblies from TRQ on your 1994-2004 Ford Mustang. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This repair was done on a 2003 Ford Mustang Base 3.8L Convertible 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Ford Mustang
1995 Ford Mustang
1996 Ford Mustang
1997 Ford Mustang
1998 Ford Mustang
1999 Ford Mustang
2000 Ford Mustang
2001 Ford Mustang
2002 Ford Mustang
2003 Ford Mustang
2004 Ford Mustang
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obB3/1AXAA00013
• Phillips Head Screwdriver 1aau.to/obB3/1AXAA00013
• 11mm Socket 1aau.to/obWM/1AXAA00015
• Door Panel Removal Tool
• Trim Tool Set 1aau.to/oasb/1AXXX00006
• Pliers
• Gloves 1aau.to/oaP4/1AXSS00048
• Safety Glasses
• Hammer
• Pick 1aau.to/oYG/1AXAA00037
• Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video

[@KyloBedo-]

thank you sir. just replaced my driver side. you deserve more likes on this video 👍🏻

[@rebelwithacause3574]

A teenager backed into my really clean and many thousands of dollars invested 2000 gt passenger door. I needed this, like everything with this car it's relatively simple. New subscriber.

[@davelaw8913]

Why would you replace the regulator? What problem did the old one have. It seems like a part that doesn't normally wear out.

[@michaelrandazzo2188]

My window is stuck in the up position. How can I remove the assembly with this situation

[@BamBam2814.1]

Running into a problem where now that I’ve switched it out, the window won’t roll down all the way? Sounds like it’s getting caught on something. Thoughts?