Titanium Unlimited 200 Review
HTML-код
- Опубликовано: 7 сен 2024
- A complete review of the Titanium Unlimited 200 Multiprocess welder purchased at Harbor Freight.
In this video I test out this machine in the SMAW and GMAW processes, using 6010, 6011, and 7018 stick rods, and ER70S-6 MIG wire from Lincoln Electric.
A range of tests used to include different direction of the weld puddle, and running stringers, T-joints, and Lap joints.
If you are interested in the video of the DIY MIG CART build I did, you can check out the link here:
• DIY Welding Cart with ...
The open current voltage is only 68V It needs to be at least 78 to run 6010
Sometimes the e6010 rods can't handle more than 70 amps
You could do away with the music not a fan
your opinion is valued my dude.
I could def use the Mig sound ina song!
Hey bro! Just checked out your channel!!! Great stuff!!!! Just subbed. Yah feel free to use the MIG sound in a song! That would be sick, just make sure you come back and drop a link so I can check it out!!! And maybe send some traffic my way! 😎 Good luck
What size circuit breaker is required for 240v?
50 amp is best but 30 amp will work. Mines on a 30 amp.
Can you run stick welding on a 110 outlet?
Yes, I was able to run 6011 3/32 at 36 amps without any issues, 7018 1/8 rods would trigger my breakers if I tried to burn the entire rod.
Is the 0.023 wire about the same as 0.025? I don't see the 0.023 on the chart of this welder.
I mean, the difference between .023 and .025, you’re talking thousandths of an inch. Not like we’re building spacecraft here (although someday I would love to be on a project like that). Call me crazy but I’m going to go ahead and say….yah it’s the same. Similar to playing with hand grenades, it doesn’t have to be spot on, but it’s damn close enough.
I can not get a 7018 rod to stay weldimg it only lets me strike a arc but does not stay welding just allows me to strike it
On 120v
@@jacobherrera3598 7018 can be tough make sure you are on DCEP and turn your heat up, make sure you tight arc it, 220v is much better if you can.
sir.how much price titanom wilding.
About 800 USD
"I'm a welder boy yea just trying to weld it"
Care to elaborate on just what the hell you’re talking about?
Can you run 6010 with it ?
yes but its not that great i recommend 6011, 6010 deff works though keep a tight arc
Sorry not to sound like a dick but you can’t compare your push and pull welds on the same plate just because your plate has been heated from your pull weld so the push is gonna bite in better.
Good point! I didn’t think of that at the time, like preheating. It would definitely affect the metal/the next weld. For this video it is what it is though, it’s not going to make a huge difference you know what I mean. But Maybe I’ll do a video on the metallurgy of it all sometime🎸Thanks for your input and thanks for checking out my channel!!
P.S. i like your username😎
@@chaoticlizzards653 thanks lol