I have the same welder and love it. I dont do any huge welding projects which would require a better machine. So far after 9 months and a bunch of projects working on my 3 trailers its still going strong.
I’m in the same boat as you, I’ve never come anywhere close to 3/8 material, mostly just Mower decks/Sno Blower buckets. And I still absolutely love this machine!👍🏻
Nice! I’m seeing some videos now with multiple capabilities for $150-200. That’s what I’m shooting for eventually. Donyboy has reviewed several of them in the last few months.
If I adjusted it all the way down to where it could be used as a handle then I wouldn’t be able to open the cover. Just comes down to personal preference 👍🏻
It can be nice when you are welding overhead, as the lead is so short. If I'm welding exhaust on a car on a 2-post lift, I have to set it on a stool so I can reach the top of the pipe.......or wear it like a purse. Would prefer a handle for carrying though.
I just purchased this exact welder a month ago black Friday sale, not even had the chance to use it yet. I don't have the room to keep it outside so will be keeping it inside taking it in and out all the time, so your idea is nothing short of genius! Did you get your handle and swivel locks locally or order them? I checked my local Lowes here in NC and they have nothing that appeals to me at all. Thanks! Edit: Nevermind the question, I just read the thread where you gave someone the link for the latches. Thanks again.
I'm not much of a welder, either.. But, You know how that saying goes, right? (A grinder & paint, make me the welder I ain't).. 🍻🍻 Do you have a link or anything, for those clamps & handle? Pretty cool idea.
I bought this welder and had a question about the wire. I installed a 2 lb spool and I am getting down to the last of it. What happens when I get down to the last 12-18 in of wire? Will the wire feed keep cycling until it stops? Or will I have to clip it and just let it feed out the stinger?
So when the spool runs out, it’s going to keep feeding until it gets just past the feed wheel, it will stop feeding and you’ll have to pull the rest of that wire out of the gun/hose and throw it away. So unfortunately, you’ll be left with three or 4 feet of waist.
@@hester781 thanks for the tip. No one on RUclips has covered that process or made an attempt at covering that. I know you made a nice how to on installing a spool but not when you run down to the last 3 feet lol. Thanks again.
So different stores might have different names for them, but these were called Black Spring Loaded Butterfly Twist Latch and Keeper. Here is a link to them on Amazon. 👍🏻 MY MIRONEY 4-Pack Black Spring Loaded Butterfly Twist Latch and Keeper Metal Hardware Toggle Clamp Hasp Box Chest Closure with Screws for Flight Case,1.97" x 1.5" a.co/d/eXURVQv
I have the same welder and love it. I dont do any huge welding projects which would require a better machine. So far after 9 months and a bunch of projects working on my 3 trailers its still going strong.
I’m in the same boat as you, I’ve never come anywhere close to 3/8 material, mostly just Mower decks/Sno Blower buckets. And I still absolutely love this machine!👍🏻
I like simple and this for sure is simple..gotta love harbor freight if you know tools then you good
It also holds 2 LB. spools. Great little home machine and easy too use.
That’s good to know! I’m loving it so far 👍🏻
I just got one and I’ve been watching a bunch of videos, I thought I messed up for a sec when he said 1 LB 😂
I’ve now worked my way through a bit over 50 of your videos, in order from the beginning. Trying to get your numbers up. 😉🔧👍
Nice! I’m seeing some videos now with multiple capabilities for $150-200. That’s what I’m shooting for eventually.
Donyboy has reviewed several of them in the last few months.
The carrying strap is fully adjustable so just shorten it up and use it as a handle to move the welder around.
If I adjusted it all the way down to where it could be used as a handle then I wouldn’t be able to open the cover. Just comes down to personal preference 👍🏻
Fantastic content 👌 👏 👍
Thank you! 👍🏻
This welder accommodates TWO pound rolls of wire. And that ground clamp now costs $15.99. HF does offer a less expensive ground clamp for $6.99.
Wow, Can’t believe how expensive things are getting
Glad I bought mine back when I did. Doubt I'll ever need another one.
I put the medium grade clamp on
Excellent upgrade! Wearing that like a shoulder bag is crazy! 🫣😂👍
Thank you Scout! It doesn’t make much sense to me either. Lol it’s the perfect size and shape for a handle right on top.
It can be nice when you are welding overhead, as the lead is so short. If I'm welding exhaust on a car on a 2-post lift, I have to set it on a stool so I can reach the top of the pipe.......or wear it like a purse. Would prefer a handle for carrying though.
Great idea
Thank you! 👍🏻
I just purchased this exact welder a month ago black Friday sale, not even had the chance to use it yet. I don't have the room to keep it outside so will be keeping it inside taking it in and out all the time, so your idea is nothing short of genius! Did you get your handle and swivel locks locally or order them? I checked my local Lowes here in NC and they have nothing that appeals to me at all. Thanks!
Edit: Nevermind the question, I just read the thread where you gave someone the link for the latches. Thanks again.
No worries! Let me know how you make out! 👍🏻
Just a heads up you should run that welder on no less than a 20 amp 15 amp will cause that machine not to function or weld properly
Agreed, same with not using extension cords (or at least undersized ones) 👍🏻
I'm not much of a welder, either..
But, You know how that saying goes, right?
(A grinder & paint, make me the welder I ain't)..
🍻🍻
Do you have a link or anything, for those clamps & handle? Pretty cool idea.
That’s the motto I live by!👍🏻
I bought this welder and had a question about the wire. I installed a 2 lb spool and I am getting down to the last of it. What happens when I get down to the last 12-18 in of wire? Will the wire feed keep cycling until it stops? Or will I have to clip it and just let it feed out the stinger?
So when the spool runs out, it’s going to keep feeding until it gets just past the feed wheel, it will stop feeding and you’ll have to pull the rest of that wire out of the gun/hose and throw it away. So unfortunately, you’ll be left with three or 4 feet of waist.
@@hester781 thanks for the tip. No one on RUclips has covered that process or made an attempt at covering that. I know you made a nice how to on installing a spool but not when you run down to the last 3 feet lol. Thanks again.
@@NeonBoom2586that’s actually a very good point, I never even thought of that but it’s a great question 👍🏻
They have portable mini wire welders to weld in new wire
Is there a gun that has a better angle? It's too straight for me...
I can't seem to get a straight answer online but I'm sure there must be a way to swap on a better gun
What are these latch called? I like the idea of handle and side latch you installed.
So different stores might have different names for them, but these were called Black Spring Loaded Butterfly Twist Latch and Keeper. Here is a link to them on Amazon. 👍🏻
MY MIRONEY 4-Pack Black Spring Loaded Butterfly Twist Latch and Keeper Metal Hardware Toggle Clamp Hasp Box Chest Closure with Screws for Flight Case,1.97" x 1.5" a.co/d/eXURVQv
@@hester781 Thank you that helps, also is the handle spring loaded?
@@kellydeasy2269 yes! Though I could take or leave the spring loaded aspect. I was just working with what I had 👍🏻
Hello what extension cord can I use what gauge ?
10 gauge would be my preferred but 12 gauge would be the minimum 👍🏻
It says right in the manual do not use with an extension cord May damage equipment
Where you buy bought your accesories?
Everything for the welder was bought at harbor freight, my welding helmet is a Miller helmet and my leather welding gloves I bought off Amazon 👍🏻
👍👍👍👍👍👍👍👍👍🙋♂️🙋♂️
Thank you! 👍🏻
A grinder and enough time... Now that's funny
😂👍🏻
just got mine at harbor freight with 25% off, about $130 out the door...:
Now that’s a great deal! 👍🏻
Shoulda just welded it to the body...
And mess up the beautiful paint job? Come on man.