Good morning Sir, Could you help me please i did everything the same but the letters are not bold, i think i should increase the space between individual letters, what number(points) do you use to space each letters during editing(Illustrator)? or any idea why? Thank you, God bless you!
Do we have to take printout of logo as it is or after mirror imaging...bcoz some have shown as it is and some have shown after mirror imaging...plz explain the difference and is something extra needed if we take printout on tracing paper as it is...?
Bro i did the same things but couldn't get the results Exposing in sunlight for 1-1mints both side respectively it did not exposed well means the whole polymer was as normal. When I did it 2-2 mints respectively for both sides the whole liquid got harder and was unable to get my exposed stam out Kindly suggest me the right way thanks 🎉
@@CforCreation print side means back side of the tracing paper or the front side where subtract sheet (transparent sheet )for stamp is added. Considering to ur comment I did the same but half matter was exposed and rest remains in the panel.
How is that the white part stays intact whereas the black part goes away..does the polymer corresponding to the black part melt down...how does it disappear by UV rays?....Can u plz explain the underlying principle?
I am still looking for the exact material but I think UV-light hardens the polymer resin, so unexposed parts can easily be brushed away. As a final step the entire plate should be exposed to light again so everything hardens.
stamp to sahi se ban raha hai par rubber hard nahi ho raha hai bar bar chipak raha hai mujhe aapse aur suggestion lene hai apko contact kaise karana hai
Plz answer the following pointwise: 1. Some people suggest to keep in sunlight for 30 min...u suggested only 15 sec why so...also if we keep for longer time..no harm right? 2. After keeping in sunlight, some people suggest using petrol so that stamp comes out...but you didn't suggested...what actually is the role of petrol?
Which software are you using for this stamp designing.Please upload video on various stamp design-round, square and oval shapes along with their sizes.
I know Im randomly asking but does someone know a tool to get back into an Instagram account? I was dumb lost my account password. I would love any assistance you can offer me!
@Zahir Zavier I really appreciate your reply. I got to the site through google and im trying it out now. Takes a while so I will reply here later with my results.
Thank u . You are amazingly helpful. Thanks sooooo much. Please is it possible to give a listing of all items needed, tyes of printer needed ink jet or laser and most of all can you have a zoom teaching class
Hello, is there a specific viscosity or concentration that we should use for the photopolymer liquid. I am checking here in Canada and there are no results for Photopolymer liquid. All I see here is printer resin and photopolymer resin and they all have some numbers on them
its not music we want. its someone telling us how to do it and what we want and the dos and don't s. music only distracts you.
I had no idea is was possible! So intriguing.
Kya jabardast quality ka video banaya hai aur lecture bhi itna mast diya ki sab kuchh samajh me aa gya
Thank you for the turtorial!!! So freaking cool!
I love how the mystery is taken away.
You are really great.... fantastic and informative video
is the writing transferred to the resin polymer due to light reaction with dark and white areas on the print ?or something else?
Sun light me kitna time rakhna hai
It's work but know about how much time keep in sunlight
it depends on sunlight, adjust timing 2 or 3 timed then u will understand
1step me stamp ke upar tape lagayi hai??
Good work 100% real
Video timing 1:17 par kya use Kiya h transperant tape??
Oh, my God, great, good luck.
Very useful and interesting.... good video👍🏻
Thanks a lot
Please suggest how much time keep in sunlight
not work in 15 sec
normaly use 15sec for the ack and 120 sec front
Use full video thanks for share
So nice of you
Hi What is the thingy made of please
Super Se Upar Bro.Keep It Up.
How much heat it requires and how much time
Can u make inverted curved triangle stamp?
kollallo paripadi,onnu undakki nokkanam,good video
From where to buy polymer liquid or gel?
Very useful information .....
Great idea, but the links in your description do not show the the kit you used to make the stamp!!
That's the point, he's selling the stamp holders. 😃😃
ഇതു കൊള്ളാലോ, ആദ്യായിട്ട കാണുന്നെ
That’s pretty cool
Good morning Sir, Could you help me please
i did everything the same but the letters are not bold, i think i should increase the space between individual letters, what number(points) do you use to space each letters during editing(Illustrator)? or any idea why?
Thank you, God bless you!
It's chemical and liquid names,which shop get to purchase.Thanks for video.
What is the recqument goods ?
Sunlight temperature abi 27° hai abi....kitne time tak me sunlight me rakhu ye polymer stamp ab?
Mashallah........ good work
What should be glass mm
Çok yaşa be kardeşim.. ❤😂🎉
Now ehre to get that photo polymer 🤔
Wow 😮
Can we use paper for print instead of transparent film to get desired results
NO
Hello brother i also tried but name is not coming on photo polymer gel ??
thank you brother
Nice job perfect
Good job
Thanks
If there is less sunlight like foggy in that case what to do ?
Useful.. Nice
Very good👍
Best....& back groundmusic
If i logo print by Epson L130 Inktank Printer, work it????
Bonjour,votre tuto est super mais je n’arrive pas savoir quel liquide vous utilisez,pouvez vous m’aider svp ,merci beaucoup 😊
Good
Good video
useful video
Thank you. Where do I purchase the gel?
Online photo polymer
Wonderful
Super video
Thanks
How did it become 3D printed...first it was on the paper which is 2D and then it.turned into a 3D...how???
Using polymer liquid
kidu kidu....
السلام عافاك ما اسم المادة في القرعة السوداء بالدارجة الله يحفظك
Its working but how to make stamp rubber is hard
Increas exposing time
I have try but
It's make soft but not hard
Thanks for the video
I'm wondering if I can use regular uv resin. If I can't what is the name of the polymer used
Photo polymer
Useful video 👌👌
Glad you liked it
Please send me photo polymer liquid purchase links
Do we have to take printout of logo as it is or after mirror imaging...bcoz some have shown as it is and some have shown after mirror imaging...plz explain the difference and is something extra needed if we take printout on tracing paper as it is...?
Yaar liquid ka kya naam hai
Sir sunlight m kitne time tak rakhna hai
Please share the eliments name
what about uv resin?
Usefull
Glad to hear that
how did happen it embose in that polymer rubber,,, if what you did is you just print your design in a clear sheet? im curious man
Trasfer the printed stencil to polymer using sun light
Amazing 👍👍👍keep it up🎉🎉
Bro i did the same things but couldn't get the results
Exposing in sunlight for 1-1mints both side respectively it did not exposed well means the whole polymer was as normal.
When I did it 2-2 mints respectively for both sides the whole liquid got harder and was unable to get my exposed stam out
Kindly suggest me the right way thanks 🎉
Change timing,print side give 1.3 min
Otherside 1min,means u will ad just timing, its depending on sunlight
@@CforCreation print side means back side of the tracing paper or the front side where subtract sheet (transparent sheet )for stamp is added.
Considering to ur comment I did the same but half matter was exposed and rest remains in the panel.
@@DeveshKumar-op3jx LESS TIME EXPOSED,INCREASE TIMING
@@CforCreation ok thnq so much brother I did my work very well
Thankyou again
@@DeveshKumar-op3jx i am not able to get it after 5 minutes also what i am doing wrong
placed between acrylic or glass?
Glass,acrylic also work
Where to buy polymer plate?
Useful video
Glad you liked it
Give me all equipment list properly
What is name of jel
How can I order the instruments?
Is it possible to use the microwave instead of the sun
Hahahahahahahahahahahahahahahahahaha
Can i use 🔥 instead of 🌞
No
Why do you use a polymer sheet and polymer liquid together? Nice video.
Liquid only used,that one plain clear sheet to hold polymer
@@CforCreation Thanks :)
WOOWWW
White board kiska hai
Liquid polymer evdenna vangikan kitta
how much.
What type of printer you used?
Hp
How is that the white part stays intact whereas the black part goes away..does the polymer corresponding to the black part melt down...how does it disappear by UV rays?....Can u plz explain the underlying principle?
Uv light not pass through black part,so that area gose away
I am still looking for the exact material but I think UV-light hardens the polymer resin, so unexposed parts can easily be brushed away.
As a final step the entire plate should be exposed to light again so everything hardens.
Which cello tape you use for stamp making
normal clear tape
stamp to sahi se ban raha hai par rubber hard nahi ho raha hai bar bar chipak raha hai mujhe aapse aur suggestion lene hai apko contact kaise karana hai
Can 100 watt incandescent light bulbs be used instead of sunlight?
Good
Ho jayega
I make
which printer u use plz
Hp laserjet
But you are using a machine like Beamo 30w ...
Plz answer the following pointwise:
1. Some people suggest to keep in sunlight for 30 min...u suggested only 15 sec why so...also if we keep for longer time..no harm right?
2. After keeping in sunlight, some people suggest using petrol so that stamp comes out...but you didn't suggested...what actually is the role of petrol?
Its depending on sunlight,two three time expose on sunlight then u can decide timing on ur area,if u keep more time liquid will spoil
@@CforCreation ohk...so if we keep more time...our stamp can also spoil/change shape?
@@CforCreation also...plz tell about the petrol part...
सर स्टेम्प एक्सपोंज होने के बाद कोनसा केमिकल से साफ किया है हमें?
Soap water
Which software are you using for this stamp designing.Please upload video on various stamp design-round, square and oval shapes along with their sizes.
adobe illustrator
I know Im randomly asking but does someone know a tool to get back into an Instagram account?
I was dumb lost my account password. I would love any assistance you can offer me!
@Gunnar David instablaster ;)
@Zahir Zavier I really appreciate your reply. I got to the site through google and im trying it out now.
Takes a while so I will reply here later with my results.
@Zahir Zavier It worked and I actually got access to my account again. Im so happy:D
Thanks so much, you really help me out :D
Polymer liquid name plz.....?
Name is polymer liquid
@@CforCreation
ആ liqud എവിടുന്ന വാങ്ങുന്നത്..
ലിങ്ക് തരുമോ ?
👍🏻👍🏻👍🏻
कौनसा लिक्युईड धोया /साफ किया है बताया नही।
Bruh oru stamp undakkan help cheyyamo??
Mobile number oo email oo tharamo?
Make one for me .
💛💛
Which printer is used for printing can we use ink printer epson l3110
Any laser jet print ok
How thick must the glass be
5mm
Thank u . You are amazingly helpful. Thanks sooooo much. Please is it possible to give a listing of all items needed, tyes of printer needed ink jet or laser and most of all can you have a zoom teaching class
Hello, is there a specific viscosity or concentration that we should use for the photopolymer liquid. I am checking here in Canada and there are no results for Photopolymer liquid. All I see here is printer resin and photopolymer resin and they all have some numbers on them
In india almost people doing this using sunlight,just want make sure exposing time
use the photopolymer resin..... Its the same(the same called as liquid) the numbers like 40/50are hardness indicators. 50 will do great stamps.
I m from Canada as well and haven't been able to find this liquid. Did you have any luck?
@@mehnoork2276 I'm thinking it's called uv resin here. You'd want the soft, it's flexible.
@@roshannazareth3461 40ml polymer and 50lm hardener?
Today I tried but failed