How to fix a Mercedes matrix LED headlight replacement and programming
HTML-код
- Опубликовано: 30 июл 2024
- Replacing $8000 Mercedes matrix LED headlights programming set up,
Watch this video and learn why your new headlights will burn out if you don't follow the programming procedure, 
Авто/Мото
This is so helpful. Thanks for sharing the knowledge!
Awesome vid‼️ I felt like you in the beginning I’ve checked everything. Will have to go to dealer to program Fxcccxk lol
hey, can you show us how to change the marker light bulb? do you have to take everything out?
Hi can I change my headlight from Mercedes E class E220 to E350 it’s different two aluminium boxes and old one have a one aluminium box is it possible to change what they need to change thanks
Damn 🤯. Nice job.
Hi i need help i changed right hand headlight module need to program only right hand or need to program both modules
Greetings to all, recently the damage to the car was repaired and at the same time the front right light was replaced. Now the new light shines differently than the old one. I would like to know if it is possible to program the lights so that they both shine the same?
Hi , w212 after accident replace left head light retrofit and original has 12 pins and new retrofit has 11 pin how can I get good connected please. Thank you
Very good video friend, is there a link to buy the original tool The Mercedes scanner
My adaptive high beam is inop. Do you know what might be the cause?
Hey I have a c63 and the led code sticker is scratched, can it still be programmed?
I bought a brand new headlight module listed as A1769001204 for a GLA180 (using the original non-working module to retrieve the code). However, it did not work. If I turn on the headlight, the headlight keeps turned off, but the turn signal turns on. If I turn on the turn light, the parking lights turn on. And so forth. It's a mess. It looks like it must be recalibrated. Is there a way I can do that using the programming software?
Speaking with the seller of the module, he says the code A1769001204 is for a CLA not GLA and he says that's probably the issue. I'm not sure, I think it's more a programming issue.
Any enlightment I can have on that would be very helpful
So wear did you buy the tablet and pass through at?😊
Hi, can we get this xentry to work in Saudi Arabia if we pay the designated fees? Can you tell me the procedure
Yes u can but is gonna cost u 9000 from Mercedes dealer, there’s another way to get by path one wichs cost cheaper only can’t do online
Great vedio boss , my question is? What if there is no barcode on the light how can i program ? The barcode available on the right headlight but left headlight not available ? And i wana program only left side because right side is working .
Hi I never try to switch to right barcode for the left headlight I guess it should work, many people have used old headlights or headlights from a different vehicle to programmed it, The main objective is to complete the calibration so you match the LED with the power supply so the headlight will perform for many years without overheating & burning out,
My 2017 GLC300 has condensation in it and it threw error and the lights went out. Once the "desiccant fix" is done and it is dried out, will a rest be needed to make light work again? if there is no other damage?
Condensation has many degrees.
If it is a fogging up, fine mist, then is a light issue, just dry it up.
If you can see water droplets formed (so not a very fine fogging up) then is severe and most likely some water may have gathered up somewhere inside. The unlucky part is that many headlights have electronic units on the bottom of headlights.
Also not everything should fail, so maybe low/high beam control unit is under, but the drl one is not, so you just have some missing functions.
If everything is "dead", maybe going to a local shop to connect to the car and delete the errors.
If not, i'd take down the headlight and inspect the control modules to see if any signs of water damage..
Awesome
So I had a similar issue headlight broke water got in I changed the headlight but now both side light have no response at all.. I'm thinking I need a new module for the light I replaced after that what will be the next steps for coding ?
You would have to take it to a dealer or somebody with the Mercedes scan tool. All the coding is done online
Hi sir
I have 2017 Mercedes c300 base model I got flooded in rain I change the unit control module in trunk now my rear turn signal is not working and the gas door is not opening can you please tell me what to be done
are the fuses okay?
Hello, when we finally make connector for new right, used headlight (it’s not brand new) the colors isn’t quite same like on left one headlight and after few minutes of working it starts blinking ?
Bed part or need new ballast or programming
Thanks
$2500 ha I bought my headlight replacement online for like $800 thing is I didn’t have to program the new module to the car just plug and play and I bought that module for $80 on ebay
The dealer quoted me $3360 for this 😂
I replaced my left headlight on mbe350 2014 he high beams and the turning signal ligh work but the normal light doesn't what should I do
Hey did you figure it out I’m having same problem
Can you help with advice for my w212 2016 with adaptive headlights fogged and stop working ???
Fog in a headlight means water got into it remove the headlight from the vehicle and remove the modules in the bottom of the headlight see if you have water corrosion if yes the headlight is cracked and needs to be replaced
Same issue my car throws up error
I have a mercades cla 2021 without the multibeam headlight but I wanted to buy multibeam headlight for my car will this work if coded and does this multibeam headlight have to be brand new or its ok if its second hand?
Mercedes are coded to the VIN number whatever options the vehicle originally came from it will be coded Mercedes Xsentry diagnostic scan tool does not allow me to change coding on a vehicle
@@adasaimingbyjackshort2123 Have you tried to manually program LED headlights using DTS Monaco? I would like to do a conversion from factory Halogen headlights to factory LED headlights. Any tips or advice?
Hi man. Question, do you need to program 2020 Lexus LED headlights after replacing lamp and LED module? I have an issue with my headlights where the high beam turns on for about 10 seconds, then it shuts off on its own and does not work again until car is restarted. Also DLRs are not coming on. I need some help.
Hi, 2020 LED Lexus headlight does not require programming some of the newer lexus require set up, after replacing headlight module,
Hello,
I change headlamp after crash on my Mercedes w213 2017 and also must buy new right headlamp connector but it’s delivered without wires, just plastic housing.
Is it possible to put my wires in it ?
Thanks
Hi,
Yes there's a special tool to release the wires from the original connector and you can transfer them over to the new connector and lock it in place I have other videos showing how to release and re-insert wiring and what tools you need thank you
@@adasaimingbyjackshort2123 Thank you very much!
Can you please share link for that video here
Why are the headlights so expensive? I have a malfunction on my right headlight of my 2016 glc300 model. All of a sudden the low beam light was not working. I was told I need a headlight control unit or possibly a headlight. Can you give me an estimate of the cost for this to be fixed assuming I need a whole headlight. I have been given a few estimates and both are so off so I’m not sure if I’m getting ripped off only because I’m a woman. Also I think these should be covered by Mercedes’ coincidently it malfunctioned once my warranty expired. Any help will really help me. Thank you.
I think the program has crashed in your headlight control module. The cheapest fix would be is to enquire about a garage that services mercedes and asked them if they do a SCN coding service. What that is ,is an internet connection that downloads the correct functioning software for your headlight module . If your lucky it might work out . It should take under an hour and might cost you several hundred dollars. good luck.
@@888snuffyso she should pay a few hundred dollars to connect her headlights to the internet for an hour? 4R?
up to her :) @@ajsh3000
What if I buy a use module that has already been programmed to the same model car. Would it work on my car?
Hi, Yes I have program used And refurbished modules and headlights.
@@adasaimingbyjackshort2123 , Hi from Norway. How that modul look like, or you meen ballast? If only a modul, that meen one to each side or?
@@adasaimingbyjackshort2123 Is the process the same to program a used headlight module? Or does it require some hack to take place?
Please tell me how can I get the Xentry kit ?
Hi. startekinfo.com
Thank Jack short
I have a 2017 C300 and I bought some 2019 LED headlights. When I connect them, only the right low beam turns on, but when I connect the left one, they turn off. I’m told they need to be programmed online, but they’re charging me $500 USD. Is it really so expensive to program them online? My headlights and modules are brand new, never used in a vehicle.
hi, yes it needs to be coded to the vehicle,
Can a used headlamp off a simlar vehicle be reprogrammed
Hello please how do I get a my xentry login and what is the cost
www.startekinfo.com $ 28600.00 includes four years subscription,
Hi there, where’s your shop? I am in Orange County California.
Hello, we are in sunny cape coral FL !
Hi did you find a place in OC CA to get the light programmed?
How do you working on this level of car and not know that there is a bunch of programming that goes into how the headlights work especially how they avoid other cars and automatic high beams the car itself is a rolling computer
Thank you your comments are greatly appreciate it
Hi.. so i just realized that my w213 2018 headlights cut off line are just too low.. and i've been looking for the tutorials on youtube, and still cant find it how.
Can you make a tutorial how to aim w213 headlights please ? 🙏🏼😅
Hi, great question but no tutorial is needed. Even though these are dynamic led head lights they still have a mechanical adjustment screw for the baseline adjustment.
Subscribed because of the cat
Where are you located i have same issue, i need an expert plz
We are in sunny cape coral fl . Thank you for asking if we can help please let us know
@@adasaimingbyjackshort2123 oops i am in GA
How do I get this scanner for my shop
STARTEKINFO.COM
This is plug and play best thing about mercedes vs other euros. something else is going on... But this genuis let's a car on the cars paint. I'm sure the customer would love unnecessary scratches....
Cat (or car) is probably declawed genius (or genuis) lol
Quicker by insert 2 flashlights
You know what... You make sense, buying Mercedes-Benz is like buying a spaceship from Russia.. 😢
How do you know so much
Its my whole life !
It's not magic, it's complicated engineering
I can tell you how to make the headlight work without coding ask me if you would like to know.
Hi, i've replaced right headlight and module in my w213 2017, and after unit programming and scn coding with LAUNCH X-431 the headlight won't work there are only 2 LED stripes working and nothing else. Fault code: U117B00
@@mikoj88 do you have the original moduel.
Yes
Can i please borrow your $35k Kindle 🙏
Hello for coding this head light must be online connection or can do with pathed xentry pffline ?