Hello, I have the same problem with only one left led daytime.. Audi only replace the optical bloc for 2k€... If I change only the LED module daytime and clear the diffuser it's ok ? Thanks you
I've repaired the same headlight on my Audi and splitting the lens from the housing was really tough. The seal was just too hard and couldn't get it soft enough so I did end up breaking the plastic in a few spots. What temperature did you bake the lights at and for how long?
Ti volevo chiedere, ma il faro ha 3 viti sopra e una quarta dove? Perché ho tolto le 3 viti ma il faro non si toglie, sento qualcosa che lo tiene sotto E poi volevo capire se questo faro a Led ha sempre lampadine D5S o quali
Peccato che nel video non si vede dove sta la quarta vite quella sotto al fanale...che è quella che non permette lo smontaggio senza togliere tutto il paraurti
Need to replace it. For full LED headlight, here is the tube www.antparts.com/products/audi-a3-drl-tube-strip-headlight-daytime-running-light-guide-circle-2017-2020
I have the same problem. But is it the tube faulty or the led bord ?? Please respond In the video, you are changing the tube by disassembling the hole light and the bord. Do I need change both???
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
Hello, I have the same problem with only one left led daytime.. Audi only replace the optical bloc for 2k€... If I change only the LED module daytime and clear the diffuser it's ok ? Thanks you
Yes you can.Cleaning the burnt part of the tube will increase the brightness
Hi antparts
I have a audi a6 c7 3.0l quattro and wants to replace the headlight and wondering if that won't be a problem
Perfect video perfect DRL module, saved me a ton of money. Grateful. The repair store let me to replace the entire headlight for $3000.
hello, how did you take the cover off? is it some sort of oven?
It's best if you have an oven. Please refer to this video.
ruclips.net/video/fv0wAUu1Sw8/видео.html
This is what they told me today, 1300 usd each, idk why a lot of a3 I see in the road have the same problem
what is the partnumber of inside LED module
B011782-A or B011783-A
thank you i love you
hello, how did you take the cover off? is it some sort of oven?
Thank you but I will stic to cars that I can change lightbulp on side of the road withiout any tools
I've repaired the same headlight on my Audi and splitting the lens from the housing was really tough. The seal was just too hard and couldn't get it soft enough so I did end up breaking the plastic in a few spots. What temperature did you bake the lights at and for how long?
Ma non si può solamente togliere un paio di millimetri di DLR dove va a contatto con il led? Perché è lì che ingiallisce e non tutta la striscia
sure. In fact we often do this too. But some tubes burned so badly that they had to be replaced.
Ti volevo chiedere, ma il faro ha 3 viti sopra e una quarta dove? Perché ho tolto le 3 viti ma il faro non si toglie, sento qualcosa che lo tiene sotto
E poi volevo capire se questo faro a Led ha sempre lampadine D5S o quali
Peccato che nel video non si vede dove sta la quarta vite quella sotto al fanale...che è quella che non permette lo smontaggio senza togliere tutto il paraurti
La quarta vite si trova sotto al fanale. Devi per forza spostare il paraurti per vederla
@@klaudiobega2 allentando le 3 viti superiori è normale che si muovono i fari?
Possono avere un leggero movimento ma se si muovono troppo c’è qualcosa che non va
@@klaudiobega2 escono leggermente verso fuori ma solo togliendo le 3 viti che ci dono sopra
@@NinoSpinner Non dovrebbe essere un problema. Cerca di non forzarli fuori perché rischi di rompere il clip con la quarta vite che sta sotto.
Ho lo stesso problema al faro come posso mettermi in contatto cn voi? Sarei intenzionato ad aggistarlo grazie
hi we only sell the repair kits www.antparts.com
Hey u dont have Option for Montenegro for sending!?🤦can u change it??
Done. Can send via FedEx
1:00 How long do you bake them for and at what temperature?
hi it is 130°C, 20 minutes.
Wouldn't it be easier to sand the end of the tube?
yes it will better but sometimes the ends are burned beyond repair.
Is this operation also possible to do on a full led headlight of a seat leon 5f?
yes but we don't have tube/LED for seat leon so sorry
Where u located at cuz my 2017audis3 lights need done
we only sale parts kits online and do not provide repair services. www.antparts.com
@antpartsonline ok thanks
hi, just a quick question do the new DRL module need coding once you replace them ?
Plug & play
Bonjourd je voulais savoir ou se trouve ce garage
hi it is in Guangzhou China
Thank you!!!
hi @Antparts, do you sell the DRL light tube? How to fix it if the end is melted/burnt? thank you
Need to replace it. For full LED headlight, here is the tube
www.antparts.com/products/audi-a3-drl-tube-strip-headlight-daytime-running-light-guide-circle-2017-2020
@@antpartsonlinehi does the tube kit include top and bottom portions of the Drl?
@@whoischxse yes include
Ciao amico quanto costa fare un lavoro così ?? Grazie
We provide LED DRL light source
Honda accord hibrid 2016 full led ???
for your information
www.antparts.com/products/accord-headlight-daytime-running-lights-led-drl-module-guide-tube/
@@antpartsonline accord 9.5 full led touring
Well done
Hi great video!
Can you recommend repair shops in Germany or neighbour countries in Europe, where you are selling your parts to? Thank you!
pls send email to tracy@antparts.com
I have the same problem. But is it the tube faulty or the led bord ?? Please respond
In the video, you are changing the tube by disassembling the hole light and the bord.
Do I need change both???