I thought it also spoiled it, but i imagine it is good to have for structural integrity due to its height; however, a slightly curved batten wouldnt cast a shadow as the existing one does so could be nicer on the eye.
I don't like the look of the horizontal bar/plank. However, I don't know what techniques (not a wood worker) could replace it. Without it, I assume, there would be warping. Perhaps a full length vertical plank would look better? That's the only nitpick. Good job on this!
The horizontal support is disastrous for a job of this scale. A bad decision to make such a minimal structure. The scale of the work would have deserved a more professional finish and decisions. Unfortunately, this is what happens when the customer limits the budget and the manufacturers want to show off. But the result is a lack of consistency. A lack of maturity! But the effect is extraordinary.
I think that it can be more than just a wall with a wavy surface. This can be some sort of a book shelf or a place to hang out things. This can generalized to modular furniture. These installations may have actual function.
@@handwerker_kor True, there is a program specified by the one who provides the money. That's what architecture is about, service. At the same time we can persuade our clients suggesting more ideas on the same object they want. Yes everything costs but the best reward is the satisfaction of all the users that will interact with it. We build for those people too, for their dreams, hopes and possibilities.
Was bedeutet Handwerker nicht für einen Menschen, der in einem Fachgebiet arbeitet? Sind Sie auch eine Person, die nur eine ganze Reihe von Dingen macht? Mein Lehrer hat es für uns gekocht.
@@handwerker_kor "Handwerker" is commonly understood by every german speaker (even by children). The specialisation would be Tischler (literaly someone who makes tables) who makes doors, windows, wall or ceiling panels. I'm not a Handwerker. Only interested as a hobbyist.
That's right. I thought it was the only way not to hurt the whole atmosphere while being simple. I paid a lot of attention to the structure, but thank you for recognizing it.
Next time you do one of these, perhaps a thicker ply panel for the backing strips and then cut channels for each of your panels to slot into. Would eliminate the need for a spacer then
Great idea but unlike MDF, plywood thicknesses can be inconsistent depending on the manufacturer. I've seen up to +/- 0.5mm which could lead to channels that are either too tight (a nightmare to fix) or too loose (visible gap). In addition a lot more milling on the CNC and the larger back panel would add material and paint labor cost. I feel the approach Handwerker took in this video is very effective! @@w2ttsy670
Beautiful! I had to laugh at the installation though.... The whole time I was watching I was saying to myself "That ceiling had better be perfectly level.." You might have cut that a LITTLE close? (Always remember, no-one can see a small gap at the top!)
With everything looking like a new installation why not replace the offending middle brace by screwing in from the other side of the wall. It would make it harder to remove later but if they can afford to install it they should be able to afford ripping out the wall later.
Yes. Also, the feeling that it is installed in what could be a basement rec room brings it down. Somehow for me that beautiful woodwork does not relate at all to the setting.
I guess you live in a time with feather dusters instead of small handheld blowers? Does your house also have candles instead of lightbulbs? I bet you hate EVs too
I am trying to make the same Parametric Wall feature to offer my commercial customers but i am having difficulty with it, I have tried to draw it on Sketchup but it came out with facets, none of the curves are smooth, what software do you use and does it splice and lay flat your components. I no longer use Sketchup I currently use Alphacam Thank you
That's really beautiful and super awesome. The shapes are very nice. Hopefully you had each one numbered hahaha just enough support and fixation not to disturb the eyes, fantastic!! 🧡🧡
here are so many things that can be done with wood that there are many works to be shown in the future. Thank you for your support that always gives me strength. Happy new year!
@@handwerker_kor endless possibilities and with the CNC you can have even more experiences. Also, you worked with other woodworkers so you can share different point of view and ideas. You're very welcome, it's such a pleasure to watch your works. Happy new year!!
стена покрасили бы в серый и крепежные палки в серый, и тогда бы их не так было бы видно, чем на белой стене. Тень падает на горизонтальный элемент и его видно. А так круто получилось!)
How are you my brother, can you send a ready-made file except for a CNC machine? I hope to work in this field, but I am not good at working on the computer accurately
Oh wow someone made the parametric wall from Blender irl ! Excellent work !!
Only change I would make is to use full plywood sheet instead of the horizontal battens. That way they don’t disrupt the view from a head on angle.
yeah, even 4mm - 6mm would do the trick
This is a matter that has been fully negotiated with the client.
That approach has been considered, but there are other reasons for not doing so.
Exactly, I just said the exact thing. The battens kind of spoil it a bit. But it is beautiful
I thought it also spoiled it, but i imagine it is good to have for structural integrity due to its height; however, a slightly curved batten wouldnt cast a shadow as the existing one does so could be nicer on the eye.
Or paint the wall and battens black so they're invisible and up the contrast of the wall it self
I don't like the look of the horizontal bar/plank. However, I don't know what techniques (not a wood worker) could replace it. Without it, I assume, there would be warping.
Perhaps a full length vertical plank would look better?
That's the only nitpick. Good job on this!
The horizontal support is disastrous for a job of this scale. A bad decision to make such a minimal structure. The scale of the work would have deserved a more professional finish and decisions. Unfortunately, this is what happens when the customer limits the budget and the manufacturers want to show off. But the result is a lack of consistency. A lack of maturity! But the effect is extraordinary.
Technology mixed with creativity, beautiful work.
Thank you for the video
Oh wow. Its the best thing I have seen in ages. I LOOOVVVEEE it!
간단하게 혼자서 유튜브 보면서 인테리어 벽틀을 짜는 것도 벅차던데 이렇게 섬세한 작업을 하는 걸 보면 경외심이 생깁니다.
안녕하세요 저는 벽틀도 짤불모릅니다 ㅎㅎ 다 본인의 전문 영역이 있는 것 같습니다. 저조차도 인테리어 내장하시는 분들 보면 존경스럽습니다 ㅎㅎ
응원 감사합니다!
언젠가.한번 해보고픈 작업입니다! 멋져요
Absolute Masterpiece, thanks for showing the brilliant manufacturing process!
메이킹 영상 찾다가 보니 홀린듯이 들어와서 영상보고 있는데
솜씨가 매우 좋으시고 작업하는 모습도 깔끔해서 보기 좋아요
멋있습니다
좋은 말씀 감사합니다!
Excelente trabajo, muy loable, saludos desde Puerto Montt 🇨🇱
I think that it can be more than just a wall with a wavy surface. This can be some sort of a book shelf or a place to hang out things. This can generalized to modular furniture. These installations may have actual function.
Yeah, that's a good idea. But we ran a project that was built and designed to meet the client's needs.
@@handwerker_kor True, there is a program specified by the one who provides the money. That's what architecture is about, service. At the same time we can persuade our clients suggesting more ideas on the same object they want. Yes everything costs but the best reward is the satisfaction of all the users that will interact with it. We build for those people too, for their dreams, hopes and possibilities.
great done,.. would be interesting to hear the sound before and after installation ,.
Nice job great imagination
This would be such a great acoustical diffusor❤❤❤
아름다움이 느껴지고..뭔지는 몰라도 뭉클해 지네요~~
힘이되는 응원의 말씀 감사합니다!
Avrei dipinto di bianco come la parete i montanti sostengno dei pannelli. Bel lavoro !
참 멋지고 예쁜대..... 저런식으로 만든 벤치와 의자 디자인이 생각납니다.... 그런대 나중에 청소하려면.... 그런 생각이 드는 조형물이내요 잘보고 갑니다
네 ㅎㅎ 먼지 잘 붙게 하려고 마감도 신경써서 하는거니까요 외국 사례가 많은 파라메트릭 디자인입니다!
Great and beautyful job. Greetings from germany to Handwerker.
Was bedeutet Handwerker nicht für einen Menschen, der in einem Fachgebiet arbeitet?
Sind Sie auch eine Person, die nur eine ganze Reihe von Dingen macht?
Mein Lehrer hat es für uns gekocht.
@@handwerker_kor "Handwerker" is commonly understood by every german speaker (even by children). The specialisation would be Tischler (literaly someone who makes tables) who makes doors, windows, wall or ceiling panels.
I'm not a Handwerker. Only interested as a hobbyist.
The way you spaced the vertical battens with a spacer block is simple but very effective. Gorgeous work and great video, just subscribed!
That's right. I thought it was the only way not to hurt the whole atmosphere while being simple.
I paid a lot of attention to the structure, but thank you for recognizing it.
Next time you do one of these, perhaps a thicker ply panel for the backing strips and then cut channels for each of your panels to slot into. Would eliminate the need for a spacer then
Great idea but unlike MDF, plywood thicknesses can be inconsistent depending on the manufacturer. I've seen up to +/- 0.5mm which could lead to channels that are either too tight (a nightmare to fix) or too loose (visible gap). In addition a lot more milling on the CNC and the larger back panel would add material and paint labor cost. I feel the approach Handwerker took in this video is very effective! @@w2ttsy670
@@Furnitecture Wow, you're so wise.
There's a reason for that
Why don't people have an insight into this situation?
Thank you very much.
Beautiful work! I feel bad for whoever has to dust that thing...
How do you know when the nut is tight enough on the tool holder?
Every machine I've run used a torque wrench, set to a very specific limit?
Amazing. I would make covers in between so you do not see the construction.
Awesome! Now who's going to dust it every week? Good luck with that!
워메 멋져요. 목공의 다양한 작업들을 소개해 주시는 멋진 채널입니다!
ㅎㅎ 새해 복 많이 받으시고 건강 관리 잘하세요!
Super fantastic 👍👍👍
Beautiful! I had to laugh at the installation though.... The whole time I was watching I was saying to myself "That ceiling had better be perfectly level.." You might have cut that a LITTLE close? (Always remember, no-one can see a small gap at the top!)
made it 10mm smaller than it actual measurement.
Measure twice, install once.
나무의 결이 모여 물결이 된 것 같아요! 멋집니다 :) 실제로 보았으면 더 좋았을 텐데 너무 아쉽네요.👍👍👍
만들고 설치가 좀 힘들었는데 그래도 설치하고 나서 기분이 매우 좋았습니다. 감사합니다!
Грандиозная работа. Молодцы. Не секрет , во сколько финансово, обошелся этот проект. Привет из России.
It's a nice video, guddos to the team. May I please know, how would you estimate the cost for this parametric structure?
What's that "HANDWERKER" font at 10:30? It's beautiful!
The font is specially made for our logo.
Wood must be cheap in China .
Do you know how much that wall would cost in America?
😅
Fantastic!!!
The middle horizontal bar turns something that would be 100% awesome into 95%
With everything looking like a new installation why not replace the offending middle brace by screwing in from the other side of the wall. It would make it harder to remove later but if they can afford to install it they should be able to afford ripping out the wall later.
Yes. Also, the feeling that it is installed in what could be a basement rec room brings it down. Somehow for me that beautiful woodwork does not relate at all to the setting.
Giant and gorgeous
Great work
Отличная реализация! 👍
Fantastic project perfectly done.
Thanks for watching! happy new year!!
very beautiful indeed! Congratulations!
Can I ask for the CNC file, or where should I buy it?
Beautiful !👍🇭🇷
CNC의 표현력.. 정말 아름답습니다
그렇죠 사람의 손으로는 분명한 한계가 있습니다!
Nice work man
Good luck dusting it and keeping it clean. Maybe some spot lights or LED lights behind it will be good.
After we installed it, we probably installed spots and lights on the ceiling.
Thank you for your advice.
I guess you live in a time with feather dusters instead of small handheld blowers? Does your house also have candles instead of lightbulbs? I bet you hate EVs too
Is it purely decorative or does it have a function like acoustic for example?
와우~
이거슨 예술이여
감사합니다 ㅎㅎ
와.. 아름답네요
대박입니다
대박 감사합니다! ㅎㅎ
I am trying to make the same Parametric Wall feature to offer my commercial customers but i am having difficulty with it, I have tried to draw it on Sketchup but it came out with facets, none of the curves are smooth, what software do you use and does it splice and lay flat your components. I no longer use Sketchup I currently use Alphacam Thank you
This one is modeled on Rhino, and CAM is an Aspire
@@handwerker_kor podrias dar mas detalles? yo uso rhino y estoy tratando de hacer algo asi usando grasshpper, pero no consigo un resultado optimo
That's really beautiful and super awesome. The shapes are very nice. Hopefully you had each one numbered hahaha just enough support and fixation not to disturb the eyes, fantastic!! 🧡🧡
here are so many things that can be done with wood that there are many works to be shown in the future. Thank you for your support that always gives me strength. Happy new year!
@@handwerker_kor endless possibilities and with the CNC you can have even more experiences. Also, you worked with other woodworkers so you can share different point of view and ideas. You're very welcome, it's such a pleasure to watch your works. Happy new year!!
Wow 🤩
Excelente trabajo 👍👍👏👏👏👏
How did you guys create the file for that. Its awesome
너무 잘 만드셨습니다. 마감은 어떻게 하셨는지요??
저도 한번 시도를 해보려합니다
마감은 우선 판재 상태에서 uv중, 상도 코팅을 하고요 가공 엣지면을 바니쉬 작업했습니다 좋은 작품 기대합니다~
@@handwerker_kor 네 좋은 정보 감사합니다 ~~
Beautiful
Impressive👏
thank you!
con que programa diseñasteis el muro y numerasteis las piezas para su mecanizado?
how is this a parametric design? what parameters it was based on?
стена покрасили бы в серый и крепежные палки в серый, и тогда бы их не так было бы видно, чем на белой стене. Тень падает на горизонтальный элемент и его видно. А так круто получилось!)
So. So good.
멋집니다~~
감사합니다🙌
Красиво, работа титаническая. Звукопоглощающая стена. Единственный минус это пыль между панелями.
Je serais curieux de savoir ce que ça donne acoustiquement. Après tout cela peut faire office de réflecteur.
I figured that the back wall would have been black along with the connecting pieces on the back of the wall to hide them.
É autolimpante???
This is gorgeous!! Bravo! ❤
WoW magnifique!😮
How much does it weigh?
우와 이런 규모의 작품은 얼마정도 할까요.. 비쌀것 같네요 ㅎㅎㅎ
How many boards you used?
about 50 board
How are you my brother, can you send a ready-made file except for a CNC machine? I hope to work in this field, but I am not good at working on the computer accurately
안녕하세요. 영상 구독하여 잘 보고 있습니다. 감사합니다! 혹시 이 영상에서 사용하는 CNC 모델명 좀 알 수 있을까요? ^^
안녕하세요 렉슨 RXR-2450L 입니다
прекрасно провел 10 минут, спасибо, вы делаете шикарные вещи
BEAUTIFUL!!!
혹시 주문제작 가능한지요? 지방 배송이나 설치도 되나요?
가격대는 평 헤베 장단 어떤식으로 계산되나요?
안녕하세요 면적 계산해서 자재 수량이 나오면 금액이 결정됩니다. 지방도 괜찮습니다
@@handwerker_kor 아 그렇군요 지금 준비 과정이라 성사되면 어디로 연락드리면 될까요?
@@user-le5sf9tt2n 한트베르커 검색하시면 네이버 톡톡이나 연락처 공유 되어 있습니다.
@@handwerker_kor 알겠습니다~
Beautiful!
CNC es una maquina ecepcional, permite hacer trabajos como este muy facil
How much consumption is for this wall? Thx
The material cost is about 4,000$
@@handwerker_kor Did you buy prefabricated boards? How many boards did you buy and what size were they?
yo bro this is crazy
고정용 바 형태의 몰딩이 너무 잘 보이네요.
뒷면을 바 형태의 몰딩이 아닌 전체를 판넬로 막았으면 더 좋았을 것 같네요.
댓글로 여러번 계속 이야기 하게 되는데요.
설계과정에서 충분히 협의가 된 사항입니다. 뒷판을 막는게 원래 모델인데, 여러 상황과 조건 때문에 보조목을 활용하기로 한 것입니다. 그런 세부사항을 다 나열할수 없기 때문에 저도 무척 답답합니다.
Nice 👍 though cleaning would be hard
All that work and effort and you leave it in bare wood. A decent lacquer in that would have taken it to a whole new level
와...작품이네요
Красивая работа...
와..정말 표현하기 어려울 정도로 멋집니다🙏
감사합니다 ㅎㅎ 행복한 한 해 되시고 좋은 작업 이어가시길 바랄께요!
와 작품이다!!!
the visible horizontal wood backing is a bit disturbing
Amazing work ! 👏
A lot of works were spent bur for me it is looks like dust collector.
Milion plywood sheet 😮😮
$$$$$ time
Amazing!
Price?? 14.000 USD?
what a fantastic outcome! looks amazing.
Can I ask you what software you used to design this?
hello!, thanks for your support! i used rhino and fusion360!
@@handwerker_kor can I have your contact details please. 🇿🇦
이작품 야외에도 설치가능한가요?
자재는 어떤걸 사용합니까?
자재는 자작나무합판입니다, 야외에는 추천드리지 않습니다
네 감사합니다.
그래도 야외에 설치 해야될경우 방법이 있습니까?
@@이동영-v3x 야외에 설치하시려면 방부목에 스테인 마감으로 설치하시면 될 것 같습니다!
@@handwerker_kor 감사합니다.
취미로 조금의 손기술이있어 자작합판으로
야외에 조형물을 만들계획입니다.
야외에 자작합판을 설치시 어떤마감이 괜찮을지
조언부탁드려봅니다.
👍👍🙏🏻🙏🏻
지린다...
와..너무 멋집니다. 제가 오디오로 음악듣는걸 너무 좋아해서 개인공간에 리스닝룸을 만들려고 하는데 너무 도움을 받고 싶네요. 연락처라도 알려주시면 바로 연락드리겠습니다
안녕하세요 댓글이 늦었네요. 010-2382-0004입니다
👍✨👍✨👍✨👍✨👍✨👍✨👍✨
🙌
From India
Very cool..
작가님 이정도 길이면 자작합판 몇장들어요?
50장 정도 들어갑니다 ㅎㅎ
@@handwerker_kor 헉 합판두께는 사이즈가 얼아인가요?^^
@@이동영-v3x 그거는 설계해보시고 비례나 구조에 맞게 하세요 ㅎㅎ
@@handwerker_kor 네 감사합니다 😊
@@handwerker_kor 작가님 자꾸 문의드려죄송합니다.
세계에서 제일긴 파라메트릭의 이런디자인 길이는 어느정도될까요?
우스운 이야기로 들리실지 모르지만 제가 지금 1.5km의 산책로를 파라메트릭 디자인으로 조성하려고 계획중입니다.
이왕이면 월드 기네스에 도전해볼까해서요.😄
참 잘 보았습니다. 설계에 사용하신 프로그램은 어떤것이였는지요?
라이노와 퓨전360 사용했습니다!
🤩😍