just started watching the video and thought you might want to see this video about one guy's experience with a certain brand of intake. digging the gold, man! ruclips.net/video/ZbdFzY25MaY/видео.html
Meanwhile, my Edelbrock Pro-Flo 4 is in and the car is running! Gotta hook up a couple more things and replace a control arm, and my 1969 Firebird convertible will be back on road!
@Keevaro, I had a '68 Camaro SS in high school! Total sleeper. Had the Eidelbrock High Rise and switching from the OG Quadrajet to the Holley 650 double-pumper never got my previous times again! Just couldn't get the mix right! Sob, then that 4X4 Ford Pick up pulled out in front of my in October of 1980 and The End. Sob.
I love your Mustang since day one. Keep it for life, like your kin did theirs. Maybe, perhaps, one day, your offspring will ride in it, will hear your stories, and have their own. You been blessed since you bought that car, never had to tear into the internals on that motor, and you have given it hell and enjoyed it. Wishing you a happy future Four Speed Films....
The journey begins. Next will be a double pumper (telling you from experience, no choke required in So Cal) and a fat wallet and you'll be a member of the 7 mpg club! I can't tell by your videos, but an MSD ignition box will give you a world of low end power! Once you go there, you can't live without it. Happy gear banging!
that's a sick car and i'm glad you got it running again. It's a gut wrenching feeling to see the milkshake oil, but you just put your head down and got it fixed, well done.
You have to be the coolest kid ever . Your car is amazing simple but loud enough to be noticed and respected . Your dad must be proud.stay humble young man .
Nothing beats the right tool for the job. Vice grips and plyers can do a lot but never get it just right. Especially crimping. Maybe grampa needs to hold a class in an upcoming vid.....Just sayin'. I've watched a lot of YT how-tos on dialing in carbs, but I almost always learn something new each time.
Man I do miss my 66. Maybe I’ll have one in the future again. Right now playing with a 63 Fairlane ranch wagon and a 65 Galaxie. The galaxie hasn’t run since 2014, and I just got the new 400/c6 setup in and cranking. Can’t wait for it to run again. It’s been too long
Bet it runs better than with the edelbrock. Holleys have to be tuned a lot more and fiddled with to get right but when they're setup right they're so much better at like part throttle and the low end
Another killer video and thanks for drive shaming me. I need to get one of my three rides back on the road soon. They've all been way more than 2 mo's but family and responsibilities get in the way.
Car looks and sounds great. Videos are great too, keep them coming. It's great to see you young guns wrenching on these old jalopies, sure beats video games. 👍🏻
You are doing great!! Love your videos, very professional!!! Time for Holley to step up and sponsor you with a upper engine kit with new intake, aluminum heads, rockers, roller cam & lifters then top it off with one of their super cool fuel injection systems!! You can do some really in depth videos of the entire install, it would be awesome!! And, OMG, the old green Mustang would definitely Rip when you get done!!!!! COME ON HOLLEY!!!!!
I just got my 65 on the road over here in the UK. Had to replace my carb with a new one and it sorted out most of the issues. I need to clean up the intake like you have done here but while its working I will leave it. probably a winter job for me now while its running.
I've been subbed for awhile now. Love a young guy that's a gearhead! Lol. Really impressed with the car. Nice to see a young generation that's into the older muscle cars or should I have said "pony cars", lol. Live n learn! Like how you don't edit out the bad stuff. Pat yourself on the back! Your doing a fine job with the Stang. I love it
Don't think I ever saw a gold intake n looks absolutely cool, love your mustang reminds of my younger days where if you drove a street rod it was all backyard build.
I know it's a little late, but while it is possible your intake was milled to match milled heads. I noticed with the "new" intake you used the FelPro blue gaskets that have a raised bead on them. They are meant for cast iron intake manifolds, so with an aluminum one, it won't "crush" enough to seal. I didn't see what gaskets you used to reinstall old intake with, if they are the same blue ones, then that shoots this idea down. I believe Edelbrock and other alum intake companies recommend Fel Pro #1250 for SBFs, and they do recommend 1/4 bead of silicone vs the cork end gaskets (which push out). Good on you putting silicone on water ports only, it will get eaten by the gasoline eventually on the intake ports. Great content, keep wrenchin!
Man at 3:55 we can see the trottle linkage hitting the air filter, you should fix that before it goes right trough it haha. Loves your videos and how you work on your car! Keep it up bro, greets from France!
Congrats on getting your beautiful Mustang back on the road! Sounds so lovely and looks so good!! I'm very close to getting my 66 Marlin on the road, I'm hoping one day to have it as dialed as yours!!
Stang is sounding healthy Ben! Glad you have a couple of old school hot rooms to help out and guide you. The car seems to run smoother with good power delivery. The updates under the hood look great and are a big improvement. If the block has been decked it can throw off the manifold sealing surfaces. I think you guys did good figuring that out. May you have smooth straight roads ahead. Great job!
I think I should consider a Holley two barrel carb for mine again. My grandpa said that a conversion to 4 bbl wouldn't really be worth it for power gains and you would lose some low-end torque. But if I'm gonna convert the car over to manual shift from the C4 automatic I need a smoother running engine. I still have the factory equipped 2 barrel and had to get it rebuilt and it still feels a little jerky even after my grandpa and I re tuned it.
Ben they make 2 different intake gaskets big and small Make sure you used the correct ones it will leak around water ports. could possibly be your problem
I like what you have done so far great job! Next: Get some seats for racing with safety belts! It will keep you from slamming into the steering wheel or being ejected wich is how most people were killed in those old cars!
New merch www.amfilmfest.com/marketplace?Collection=Four+Speed
Thanks for watching! For more content follow me on Instagram @benkahan
just started watching the video and thought you might want to see this video about one guy's experience with a certain brand of intake. digging the gold, man! ruclips.net/video/ZbdFzY25MaY/видео.html
hey at 3:56 it looks like the throttle linkage fouls the air cleaner assembly. no?
Thought it did too from the video…just checked and I’m all clear👌
@@FourSpeedFilms i watched it over again and had second thoughts. :)
Your Grandpa and Dad helping with your car is wholesome AF
Grandpa Jim, Dad & a classic Mustang, you've got it all.
Glad that Holley supports someone learning some old iron skills.
as long as you have a yt channel. :)
Grandpa's rule. Soak up all you can, Ben. Thanks for posting
Getting sponsored by Holley must really cool. They make some amazing parts.
Kudos to grand dad👍
Great to see you kids working on these old cars. Out east they call mom when they get a flat.
You remind me of me 40 years ago! Love the Mustang and the wheels and tires. Subscribed.
Meanwhile, my Edelbrock Pro-Flo 4 is in and the car is running! Gotta hook up a couple more things and replace a control arm, and my 1969 Firebird convertible will be back on road!
@Keevaro, I had a '68 Camaro SS in high school! Total sleeper. Had the Eidelbrock High Rise and switching from the OG Quadrajet to the Holley 650 double-pumper never got my previous times again! Just couldn't get the mix right!
Sob, then that 4X4 Ford Pick up pulled out in front of my in October of 1980 and The End. Sob.
Awesome! Grandpa out there dialing it in! 👌🏼
Your channel inspires me to own a classic one day
Refreshing that you don't feel obligated to dyno before/after and that you just care about the engine running smooth and reliable.
Car sounds sweet
3 Generations Great Stuff.
Man I love that mustang so much ❤️
Me too!
What size are your rims & tires?
that sound is phenomenal
Reminds me of my dad and I working on a 67 Falcon we bought. Those are memories you don't forget.
I love your Mustang since day one. Keep it for life, like your kin did theirs. Maybe, perhaps, one day, your offspring will ride in it, will hear your stories, and have their own. You been blessed since you bought that car, never had to tear into the internals on that motor, and you have given it hell and enjoyed it. Wishing you a happy future Four Speed Films....
Nice 1965 mustang awesome motor. young man you have a good car.. congratulations sounds really good too 👍🏼
The journey begins. Next will be a double pumper (telling you from experience, no choke required in So Cal) and a fat wallet and you'll be a member of the 7 mpg club!
I can't tell by your videos, but an MSD ignition box will give you a world of low end power! Once you go there, you can't live without it.
Happy gear banging!
😎 Awesome. Nice work.
the gold does look good
that's a sick car and i'm glad you got it running again. It's a gut wrenching feeling to see the milkshake oil, but you just put your head down and got it fixed, well done.
Thank you!
The gold looks surprisingly good!
Awesome Mustang! Love it
That came out super clean! Nice work man.
Yea,glad everything,an u are blessed too have Dad An Gramps along for the ride..memories 😎🤙🤙👍👍✌✌
This channel has motivated me to start restoring a 67 coupe. Love the content and all the progress!
the ole 289s just sound so good
Yeah they are pretty distinct
You have to be the coolest kid ever . Your car is amazing simple but loud enough to be noticed and respected . Your dad must be proud.stay humble young man .
Gotta love it when Stang owners finally get their cars running.. always such a celebration.. 😀
Nothing beats the right tool for the job. Vice grips and plyers can do a lot but never get it just right. Especially crimping.
Maybe grampa needs to hold a class in an upcoming vid.....Just sayin'. I've watched a lot of YT how-tos on dialing in carbs, but I almost always learn something new each time.
Man I do miss my 66. Maybe I’ll have one in the future again. Right now playing with a 63 Fairlane ranch wagon and a 65 Galaxie. The galaxie hasn’t run since 2014, and I just got the new 400/c6 setup in and cranking. Can’t wait for it to run again. It’s been too long
No greater feeling for a car guy than to see your car come back to life!
Now to get you some respectable vintage finned cal custom valve covers!
Or the Mickey Thompson's!
👍🔔 I'm suprised that the old hotrodders didnt know how to check your manifold fit issue.
Glad its running. 👍👍
minectoo. 😁😁😎
The engine bay looks so much nicer and the car sounds a lot better. Good job bud! Say hi to your pops! Treasure those memories bud!
Great info on the new msd stuff and the crimper. Filing that away for a current project :)
Would be cool to see a vid of your grandpa turning the screws and explaining his process on the carb setup.
Glad to see it back on the road
Love the mods to the only Mustang I like. Great job!
Bet it runs better than with the edelbrock. Holleys have to be tuned a lot more and fiddled with to get right but when they're setup right they're so much better at like part throttle and the low end
Another killer video and thanks for drive shaming me. I need to get one of my three rides back on the road soon. They've all been way more than 2 mo's but family and responsibilities get in the way.
Hell yeah, excited for more. My truck should be running in just a few months
Looks a lot better for sure
Luv the revitalized engine!!!
Love the bullet vibe of your car
Thanks
i'm here bc of AutotopiaLA
, love the 60s Mustangs! more so the 1968 mustang hello from London Ontario Canada, liked and subbed!
Great Job! Engine compartment looks great! That car sounds soooo good!!
I immediately stopped matchmaking in Free Fire to watch your new video 👌
Happy birthday Benny!!
Thanks love♥️
@@FourSpeedFilms happy birthday dude 👊
A gr8 job in the video! Sights, sounds, music... And the car is cool! Have Fun!!
Ben stop making me want a Mustang! Especially now they are cheaper than a Skyline haha
Didn't think it would, but the Black does look better...!
Glad it’s rolling again Ben, good video 🔥
Congrats on getting the mustang back up. I'm in the middle of replacing all the suspension on mine.
car is coming along great. glad to see it back on the road.
Awesome Ben. Finally got my truck back on the road after a month of downtime.
Car looks and sounds great. Videos are great too, keep them coming. It's great to see you young guns wrenching on these old jalopies, sure beats video games. 👍🏻
You are doing great!! Love your videos, very professional!!! Time for Holley to step up and sponsor you with a upper engine kit with new intake, aluminum heads, rockers, roller cam & lifters then top it off with one of their super cool fuel injection systems!! You can do some really in depth videos of the entire install, it would be awesome!! And, OMG, the old green Mustang would definitely Rip when you get done!!!!! COME ON HOLLEY!!!!!
I just got my 65 on the road over here in the UK. Had to replace my carb with a new one and it sorted out most of the issues. I need to clean up the intake like you have done here but while its working I will leave it. probably a winter job for me now while its running.
I've been subbed for awhile now. Love a young guy that's a gearhead! Lol. Really impressed with the car. Nice to see a young generation that's into the older muscle cars or should I have said "pony cars", lol. Live n learn! Like how you don't edit out the bad stuff. Pat yourself on the back! Your doing a fine job with the Stang. I love it
Don't think I ever saw a gold intake n looks absolutely cool, love your mustang reminds of my younger days where if you drove a street rod it was all backyard build.
Awesome car for a great young man! Looks and sounds mean! Congratulations!
I know it's a little late, but while it is possible your intake was milled to match milled heads. I noticed with the "new" intake you used the FelPro blue gaskets that have a raised bead on them. They are meant for cast iron intake manifolds, so with an aluminum one, it won't "crush" enough to seal. I didn't see what gaskets you used to reinstall old intake with, if they are the same blue ones, then that shoots this idea down.
I believe Edelbrock and other alum intake companies recommend Fel Pro #1250 for SBFs, and they do recommend 1/4 bead of silicone vs the cork end gaskets (which push out).
Good on you putting silicone on water ports only, it will get eaten by the gasoline eventually on the intake ports.
Great content, keep wrenchin!
Quality content and beautiful car!
Happy to see it running again 🤙🤙
Love the 65 stang beautiful car
Not a 65 but a 66
I enjoyed this video SO much that I had to clean the non existent grease from underneath my fingernails when I was done
Your videos are the best!
Solid work, Ben. Congratulations - just in time for summer!
That's a great feeling getting a car that's faced some adversity back out on the road.
Keep on perservering man 👍👍
Cool stang, keep up the great work!
Man at 3:55 we can see the trottle linkage hitting the air filter, you should fix that before it goes right trough it haha. Loves your videos and how you work on your car! Keep it up bro, greets from France!
I don’t think it’s actually hitting it.
Congrats on getting your beautiful Mustang back on the road! Sounds so lovely and looks so good!! I'm very close to getting my 66 Marlin on the road, I'm hoping one day to have it as dialed as yours!!
Yeeeeh a happy ending video.. no cliffhanger this time 😇
Stang is sounding healthy Ben! Glad you have a couple of old school hot rooms to help out and guide you. The car seems to run smoother with good power delivery. The updates under the hood look great and are a big improvement. If the block has been decked it can throw off the manifold sealing surfaces. I think you guys did good figuring that out. May you have smooth straight roads ahead. Great job!
Looks good Ben!
That looks so much nicer! Great job dude 👍
Dude road trip it!
Really cool, engine bay looking great after the changes
Thanks!
Sweet! Nice work!
Great video Ben.
looks a lot better
man its so awesome that you have someone helping you! At times I wish I had the same support but now I can say that I built it myself.
Always great episodes Ben! Glad to see that car back on the road!
Looks beautiful in gold. My stang loves my Holley too fired right up everytime
your car has been such an inspiration to me. thank you for being who you are and doing what you do, as well as sharing your adventures with us💛
Dude I just got Holley sniper EFI installed on my 427 cobra and I love it. They make good stuff
I think I should consider a Holley two barrel carb for mine again. My grandpa said that a conversion to 4 bbl wouldn't really be worth it for power gains and you would lose some low-end torque. But if I'm gonna convert the car over to manual shift from the C4 automatic I need a smoother running engine. I still have the factory equipped 2 barrel and had to get it rebuilt and it still feels a little jerky even after my grandpa and I re tuned it.
Glad to see you got it running good bro
Ben they make 2 different intake gaskets big and small Make sure you used the correct ones it will leak around water ports. could possibly be your problem
Nice going
Sick car brother, I daily my 73 charger 🤘🏻🤘🏻
yo the mustang is looking fresh and the engine clean!
I want to own one ,one day😊
Looks awesome and sounds legit. Love it man
You should go on Jay Leno’s garage. You’ll be a star
I like what you have done so far great job! Next: Get some seats for racing with safety belts! It will keep you from slamming into the steering wheel or being ejected wich is how most people were killed in those old cars!
Awesome sound man!