Thank you! I got sick of trying to get soap in the smallest opening of a container ever, and found your video. I had the tubing from an A/C draining project and upcycled an old thermometer casing as the straight/hard piece at the end. When it worked, it felt like a miracle.
Big and big big fan of the world of a world of war and the way it was in my opinion that the game was not the best way of winning it was a bit of the time of a ride on a big screen or the other end to a ride on a ride in a ride with a man and the man of a woman 👩 the head and his family to his friends to a world 🌍 to a world 🌎 world 🌎 the same year that was in his career and then in his own life in his life to a new world 🌎 the first of a ride he played with his team and a man 👨 the world 🌍 the first team of his team and then in his
Absolute critical point: you have to seal any air leaks with glue ...or tape. You mentioned that but just to enphasize. Our pump had a long down spout which went into the included bottle. I cleaned the down spout and then put the 1/4" tubing as far as it would go in that down spout up to near the pump. I used clear packing tape to seal the tubing to that down spout. I also inserted a fish tank check valve near the top of the soap bottle. Superglued that into the 1/4" tubing to seal leaks (tried it without first...even though very tight friction fit, it leaked ) When I empty a pump container I will put the 1/4 tube in the soap container into that rigid tube like you did. Other ppl boil the tube for 60 seconds and stretch it flat on a towel to straighten it. That might work too. Thanks for the video!
I have followed what is shown in the video and been using this for close to 2 years. Something went wrong and it does not dispense the soap consistently, with every pump we make. How to know if there is an air leak?
You are fantastic!!! I just bought one of these soap dispensers and the bottle that holds the soap does not last long at all!! Thanks to you, I now know how to make the soap last much longer!! I will subscribe to your channel immediately!! Thanks again and have a nice day 😊!!
Just make sure that the tubing doesn’t make an air tight seal in the opening of the soap bottle. If it does, just put a small hole in the cap to let air in, otherwise the dispenser won’t be able to draw the soap through the tubing!
When you are not washing dishes, does the soap goes back into the bottle again and you have to pump again for several minutes? Please let me know bcuz my bottle dispenser is broken now
This is awesome !!! I saw something like this Buy i must tell you You are way ahead of the game! Even i can do it......I had told my husband to help me because the other one they use a drill to cut out the center of the cap ! and you did it without any electrical tools!!!! I am going to do this thx alot!!!
Your missing a check valve to install mid way up the tube to have your soap primed to make sure you always have soap ready to go with less pumping if you run out . Amazon part if need size smaller than what your tube is so the hose fits on the exterior part of the valve check part. My utility sink I simply used an industrial or shampoo dispenser and either a hex with female bolt or simply cut the male end of the container the spout is attached too and screw it onto the bottom part of your utility sink to hold down each making your project half the cost of fancy dispensers that end up clogging or breaking.
I am very clever with doing things with that said not one time did I think of doing this. I got two soap dispensers but both my bottles are missing and now I can actually use them . Thank you so much for this video
Thank you so much!! I purchased a used sink with the soap spout, however the was missing. $38.00 in store, $9.99+SH online just to replace the bottle. I'll be making trip tomorrow to the store for the tubing.
I found you while i was looking for a name for my video, if i saw your video before i did my distributor would help me a lot, but next time they improvised something like you. In these days I will publish my distributor for my kitchen😁 nice your idea🥰😍👍👌👏
I know, very tight space, but if you examine your sink, you should be able to get this, it is simple and also I had to buy the tube with return valve after about 6 months as the it started getting air in the tube and the soap wouldn’t dispense well so I highly recommend to buy ready kit from Amazon come with everything needed amzn.to/33f8flY
Just make sure to use return valve to avoid issues in future. I had to add return valve to my tube after about 10 months when it started giving me trouble with air getting trapped in the tube
Common Sense Rip Debt Elimination I’m actually having this issue! Do you mean something like this? www.grainger.com/product/GRAINGER-APPROVED-Check-Valve-4DHY3
I tried tbis with a $12 kit from Amazon. After about 200 pumps i gave up since the soap wouldn't come out. It made its way all the way up the tube but just never came out... Frustrating.
My dad did something like this but for whatever reason the top part that connects to the dispenser drips soap not the part where the soap is coming from
You could have pulled the dispenser out and showed how to connect the problem I have with these dispensers it's not refilling etcetera it is repairing when they quit bouncing up and down I tried loosening mine up and it just got Tighter and Tighter
I did exactly what you demonstrated here but my pump often does not have soap available even though I have a full bottle of soap under the sink. I have to pump it about 30 or 40 times before it starts coming out almost every time I use it. I don't understand what's different. Can you help?
Really?? And many people are amazed by this?? This is the most common knowlage of things that assume everyone with sense should know! And 5 minutes to explain
Thank you! I got sick of trying to get soap in the smallest opening of a container ever, and found your video. I had the tubing from an A/C draining project and upcycled an old thermometer casing as the straight/hard piece at the end. When it worked, it felt like a miracle.
If you start getting problem with dispense, buy professional product from Amazon come with no return valve to make life even easier
I have never wanted a soap dispenser because it is just to hard to refill but, you just made me want one. I love this hack!
👍
I just lift out the handle and fill from the top.
We got an attachment where we can screw the bottle directly onto the pump to save cabinet space
Birthday 🎂
Big and big big fan of the world of a world of war and the way it was in my opinion that the game was not the best way of winning it was a bit of the time of a ride on a big screen or the other end to a ride on a ride in a ride with a man and the man of a woman 👩 the head and his family to his friends to a world 🌍 to a world 🌎 world 🌎 the same year that was in his career and then in his own life in his life to a new world 🌎 the first of a ride he played with his team and a man 👨 the world 🌍 the first team of his team and then in his
Absolute critical point: you have to seal any air leaks with glue ...or tape. You mentioned that but just to enphasize.
Our pump had a long down spout which went into the included bottle.
I cleaned the down spout and then put the 1/4" tubing as far as it would go in that down spout up to near the pump.
I used clear packing tape to seal the tubing to that down spout.
I also inserted a fish tank check valve near the top of the soap bottle. Superglued that into the 1/4" tubing to seal leaks (tried it without first...even though very tight friction fit, it leaked )
When I empty a pump container I will put the 1/4 tube in the soap container into that rigid tube like you did. Other ppl boil the tube for 60 seconds and stretch it flat on a towel to straighten it. That might work too.
Thanks for the video!
Thank you 🙏🏻
I have followed what is shown in the video and been using this for close to 2 years. Something went wrong and it does not dispense the soap consistently, with every pump we make. How to know if there is an air leak?
You are fantastic!!! I just bought one of these soap dispensers and the bottle that holds the soap does not last long at all!! Thanks to you, I now know how to make the soap last much longer!! I will subscribe to your channel immediately!! Thanks again and have a nice day 😊!!
Thanks for sub dear. Enjoy
This is fabulous! I bought a soap dispenser then realized I didn't have enough room for the bottle; this solves the dilemma!
👍
That’s a great hack! I’m always refilling the small container, which is annoying. I purchase my Dawn from Costco, so it will last for quite some time!
👍
I did this last year and it works great!
👍
Just make sure that the tubing doesn’t make an air tight seal in the opening of the soap bottle. If it does, just put a small hole in the cap to let air in, otherwise the dispenser won’t be able to draw the soap through the tubing!
Thanks for sharing
Bhavna's Kitchen & Living
Thank YOU!
I've been doing this hack for almost 10 years. Great video!
👍
When you are not washing dishes, does the soap goes back into the bottle again and you have to pump again for several minutes? Please let me know bcuz my bottle dispenser is broken now
@@rajvirpannu7125 I want to know this too. Does anyone know?
This was helpful. Thanks.
Glad it was helpful!
I've had this set-up for the last 12 years. But is good you show others how to do it. It's much better then refilling the small bottle constantly.
👍
It's not working for us. Did you use a straw as well all these 12 years? Nervous that all the pumping will ruin the mechanism
Well organized kitchen bhavna thanks for sharing and your time
My pleasure
Thanks, great stuff. I used an Oreck XL vacuum to prime my old unit. I was fortunate to already have the tubing I needed.
Glad it helped
Oh my god! What a cool idea!! Great job bhavana! I'm gonna try this!
👍
It is a great idea!! Upgrade my kitchen sink soap dispenser with sontiy soap dispenser extension tube. The built-in check valve is much convenient.
Agree
Genius. Best idea I've seen in a VERY long time. Thank you SO MUCH.
My pleasure 😇
The retail versions of this hack sell a 1-way inline check valve. Sounds like you didn't find you needed that? I think it's so it doesn't lose prime.
What retail versions have a check valve?
@@edgetown100 search on amazon. It was like $16. I 'built' one without the check valve as above and it's fine.
This is awesome !!! I saw something like this Buy i must tell you You are way ahead of the game! Even i can do it......I had told my husband to help me because the other one they use a drill to cut out the center of the cap ! and you did it without any electrical tools!!!! I am going to do this thx alot!!!
Great to hear that this video is helpful to you.
Mind blown!! Thank you, I will be doing this with mine 🤗
My pleasure
You're brilliant! 💡 I struggle so much with this problem. Thank you for this video.
My pleasure
A must try! Thank you for sharing!
Thanks! I will definitely try this. 👍🏼
👍
Nice! I will be doing this in my Class B camper van conversion.
👍
Thank you so much for sharing your knowledge with me. I used sontiy's soap dispenser extension tube and it really helps and it's so easy to set up.
So great to hear that
My stress has left me..I'm gonna try this one out..ty
👍
Your missing a check valve to install mid way up the tube to have your soap primed to make sure you always have soap ready to go with less pumping if you run out . Amazon part if need size smaller than what your tube is so the hose fits on the exterior part of the valve check part. My utility sink I simply used an industrial or shampoo dispenser and either a hex with female bolt or simply cut the male end of the container the spout is attached too and screw it onto the bottom part of your utility sink to hold down each making your project half the cost of fancy dispensers that end up clogging or breaking.
I did install later
This is a Nice idea I'm definitely going to try it Thanks !
👍
I am very clever with doing things with that said not one time did I think of doing this. I got two soap dispensers but both my bottles are missing and now I can actually use them . Thank you so much for this video
👍
Bhavna, you are a brilliant engineer! 🤩 Thank you so much for sharing this. I am putting in a soap dispenser thanks to you! Any more tricks like this?
My pleasure and absolutely more tricks can be found on my channel
Thank you!
You're welcome!
Thank you so much!! I purchased a used sink with the soap spout, however the was missing. $38.00 in store, $9.99+SH online just to replace the bottle. I'll be making trip tomorrow to the store for the tubing.
👍
i know I am quite randomly asking but does anybody know a good website to watch newly released movies online?
@Enzo David flixportal :D
@Layton Abel thanks, signed up and it seems like they got a lot of movies there =) I appreciate it !!
@Enzo David happy to help xD
Put in 2 more, one for hand soap, one for lotion. Lifestyle upgrade!
👍
wow! just found , thanks!
Welcome!
THANK YOU!!! You just solved a problem I've had for months!
👍
very clever 👏 👌 😀 i am doing it right now 👍
Excellent idea
Smart! great hack!
👍
Thank you for sharing this video it will help me a lot
My pleasure
You are a genius.
Thanks
I’m sure you just saved my life lol. I will know after I purchase those items. I’m excited about the idea. Thank you
You will love it. Just be sure to buy return valve as well or just buy the whole kit from the link below
Thanks for making the video... you are so innovative... I wish to meet you once..
Thanks for idea my husband did it shop dispenser just like you saw on you tube thanks again
👍
I've got to try this!! Thanks for sharing!
My pleasure
AWESOME!!!! Thank you lovely lady!
My pleasure
I needed this soo much. Thank you.
My pleasure
Thank you. My new cabin in Alaska will be out fitted with your idea.
👍
I found you while i was looking for a name for my video, if i saw your video before i did my distributor would help me a lot, but next time they improvised something like you. In these days I will publish my distributor for my kitchen😁 nice your idea🥰😍👍👌👏
👍
Good idea thanks
My pleasure
Super Mam.Nice Idea. thanks for sharing.
My pleasure
I think you might need a 1/4 one way check valve to keep the soap in the line.
Yes I installed later after poting this video
What does that mean?
This is a very good idea. Thank you for sharing.
My pleasure
Nice idea. I wish you had a flashlight to show where the tube does into the pump
I know, very tight space, but if you examine your sink, you should be able to get this, it is simple and also I had to buy the tube with return valve after about 6 months as the it started getting air in the tube and the soap wouldn’t dispense well so I highly recommend to buy ready kit from Amazon come with everything needed amzn.to/33f8flY
I enjoyed your idea but i loved watching you.
👍
👍👌👏 thank you for sharing
My pleasure
Excellent...wish me luck
Just make sure to use return valve to avoid issues in future. I had to add return valve to my tube after about 10 months when it started giving me trouble with air getting trapped in the tube
Thank you very much for uploading the video .
My pleasure
I am getting one this weekend! thanks!
👍
Congratulations ! It´s a great idea, now I´ll get a soap dispenser.
👍
Thanks 😁 for sharing 👍
Do you have issues with keeping the dispenser primed (keeping soap from flowing back into the supply bottle)?
My kitchen sink dispenser is used quite often so no issues but if we go out for couple of days and when used first time, I have to press few times
Common Sense Rip Debt Elimination I’m actually having this issue! Do you mean something like this? www.grainger.com/product/GRAINGER-APPROVED-Check-Valve-4DHY3
@@AndrewGLegrand where do you install the check valve? At the bottom or at the sink end? I’m having a problem with my hose collapsing on itself.
@@d.marinello7210 Install the check valve as close to the end of the pump as possible.
Nice trick 😊👍👌
👍
Nice. Innovative.
Thanks
Awesome idea.
Thanks
Great idea! Thanks!
👍
We have something similar in our daycare kitchen too 👍
👍
Very nice 👍
👍
Thank you for posting. We have a similar issue and will try to duplicate what you have done.
👍
I will be doing this. Excellent
👍
Wow very good nice enjoyed this a lot this helps
👍
@@Bhavnaskitchen welcome
Great idea . Needs a bit tweaking but great invention. Can mass produce and make a profit
👍
Very clever
👍
thank u come again
My pleasure
Brilliant!
👍
💪 Like a Boss!
Excellent idea ...
👍
That’s awesome. Why didn’t I think of that?
👍
Wow, gr8 hack 4 soap dispenser. Gr8 minds 4 gr8 hacks. Thx 4 sharing on the internet. Keep on inventing.
👍
Awesome hack
👍
Thank you 😊👍
My pleasure
Are you an engineer? Superb idea?
I wish...
I’m going to do this.
👍
I had to put check valve to keep soap from getting air in tube
Yes, I did that too
I tried tbis with a $12 kit from Amazon. After about 200 pumps i gave up since the soap wouldn't come out. It made its way all the way up the tube but just never came out... Frustrating.
Hum.. did you use return valve correctly?
My dad did something like this but for whatever reason the top part that connects to the dispenser drips soap not the part where the soap is coming from
Hum..
You could have pulled the dispenser out and showed how to connect the problem I have with these dispensers it's not refilling etcetera it is repairing when they quit bouncing up and down I tried loosening mine up and it just got Tighter and Tighter
Hum.. will try to live again
Super Mechanical skills
👍thanks
Freaking brilliant!!! Thanks for sharing!
My pleasure
Can n remove the top part of the dispenser and pass the tube under the sink?
It depends on what kind of dispense you have.
Superb idea:)
👍
I did exactly what you demonstrated here but my pump often does not have soap available even though I have a full bottle of soap under the sink. I have to pump it about 30 or 40 times before it starts coming out almost every time I use it. I don't understand what's different. Can you help?
I actually installed no return valve now as I had the same issue
@@BhavnaskitchenRush you but you say "no return valve?" So you did or didn't install a valve? Thank you!
Hi
I did this two weeks ago and it’s worked for couple days now stop working (soap not coming out)
I had to add returning valve to keep liquid in the straw
Nice video
Thanks
👍
👍
You r looking good after your visit your country
Absolutely. Because after relaxing, it feels so good
About 200 pumps will get the soap up. But when youre not using it, air gets into the tube
I don’t have that issue
Just add a simple one-way check valve into the supply line and the soap will not drain back into the bottle.
@@commonsenseripreviews7462 Youre absolutely right. Works perfect
Where did you get the straw and what shampoo did you use??
I bought tube from Home Depot and I don’t use shampoo but used shampoo straw. If desired, you can get ready kit link under video description
@@Bhavnaskitchen but there was a colorful straw I saw on your video where did you get it ? Thank u for replying
Oh that is the straw came with drinks jar but you can use any kind
Thank you for sharing your ideal And I tried it and I can say I am saving money By controlling how much soap I need to you👍👍👍👍
Great!
Probably y we use Vim bar back home
Really?? And many people are amazed by this?? This is the most common knowlage of things that assume everyone with sense should know! And 5 minutes to explain
I did this and one month later, it all fell apart. Don't throw out your old dispenser
What fell apart? I installed no return valve just couple of months ago as the liquid was taking longer to dispense and working great again