We Dyno A Billet Head and Make Huge Power!!!
HTML-код
- Опубликовано: 11 окт 2024
- Today we make the most horsepower on the dyno! We dyno the billet head engine and install it on Lonnie's mini bike. This thing rips and feels like it never stops pulling!!! Stay tuned for the next video where we dyno it again to get maximum power!
~ Parts Used On This Build~
18cc Moflow Billet Head - bit.ly/3GObnX3
14cc Moflow Billet Head - bit.ly/3MMgAT3
1.3 Gage Rockers - bit.ly/3fB7hkG
Tillotson 225cc Engine - bit.ly/39XzZu7
Tillotson 225cc Builders Kit - bit.ly/3iwjE6d
MB200 Mini Bike - bit.ly/2OutchV
MB200 Exhaust - bit.ly/3BlKqoz
MB200 HD Fork Mount - bit.ly/3BqEgU0
MB200 Front Brakes - bit.ly/3DtvXbW
Tires - bit.ly/3ykKrId
Billet Shocks - bit.ly/3MCrkAd
60 Tooth Sprocket - bit.ly/3DsKCnR
Frame Bushings - bit.ly/3ZPitlD
MSD Ignition Coil - bit.ly/3wn8uX2
Merch & Events - bit.ly/33YbmtO
Check Out Go Power Sports for all your Go kart needs! bit.ly/2viX9vP
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Machinery- Siegmund Welding Table - bit.ly/36PHm6G
Nargesa CC60 Bender - bit.ly/2xWDVxj
Prime Weld Tig 225x - amzn.to/3L4U3MG
Prime Weld MIG180- amzn.to/3KVUPvn
Amsoil Affiliate - bit.ly/3TWtrmM
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
TikTok - redbeardsgarage0
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage
First thing I'd be checking is the pushrods 1) do the the pushrods clear the bores through the entire lift range. 2) flexing pushrods create a valve bounce situation.
Higher lobe lift is only part of the story. Higher ratio rockers bring the bring the pushrod pivot closer to rocker centreline. This has two affects 1) the pushrod moves closer to it's bore (higher lift also means it runs through a larger arc) 2) there is more load on the pushrod side of the valve train because of the change in leverage
Jeepers mister, that’s a ripper !!
I hope this is a lonnie reference as this is his bike "Jeepers mister you're strong!" 😂😂
I like the engine. I love the scripture.!!!
Goodness, those are fast bikes. Sorry to hear about the storm damage. God Bless yall!
My friend, I’ve never seen any of your videos before but because I am so impressed that the Lord allowed me to notice the subtle evidences of your faith, prior to the dyno test, I am writing this to encourage you. It appeared to me that the Lord is going before you. I thought, this guy is bright, he has a pleasant countenance, his shop is clean and you know there is something about him, he just may be a believer. And then, of course, the
verses and concluding blessing gave affirmation to my first impression. I will be following your videos, when I can, and praying that the Lord may bless you and use your work to draw many to Jesus. For the last 52 years I have tried to do my own auto maintenance/repair, first because I had to, but now, I just like doing it. I will be watching for your videos.
I really appreciate you kind words sir. God is the reason for all my success and I give it all to him. My testimony is on my channel if you would like to check it out.
New subscriber here and I really like all the new things you can do to these engines now. When I was a kid back in the early 60's my friend and I had a go kart frame but no engine and one of his dad's friends gave us two old McCullough Chainsaw engines meant for the old 50's style saws they were fairly big and pretty stout. Once we got them working in sync we had a death machine you would have been proud of. It went way faster than you should ever go on a go kart from the 60's. I am happy to report both of us lived and it started me on a life long love of working on engines. Keep up the good work! Oh and for a brake we had a piece of flat stock bent where we could lever it against the back wheel, did many unintentional spin outs because of it.
The 236 I built and ran in the drag bike has the Moflow 14cc head out of the box with 1.2 rockers and a .356 cam. I did use 1/4" pushrods but it shouldn't make much difference being they are that short. It turns 10,000 all day long with a Honda coil and the 6689 flywheel, I estimated 24hp with nothing trick or custom about the build. Maye be try boosting the coil gap, mine was set at .045 and on Gas, you should be running a 115-120 main jet, needle one clip up from the middle
How about the pilot? I stay Orange County .. idk if that sound make a dif cause of the sea level ?
Gaoped like the grand canyon and he was pulling away still.
I love those bikes, they are so much cooler than a dirt bike.
With that cam and rocker ratio you need at least 50lb springs or more to control the aggressiveness of the 2. .356 cam is a aggressive profile and 1.3 will make the 36lb springs float at high rpm. Upgrading to 50lb springs and larger push rods will cure this problem.
Wicked idle for a single cylinder
Your shop and this bike look so good buddy, all the blessings to you and yours! 🙏🙌
Thank you for following us for all these years brother! Your one of the real ones!
@@RedBeardsGaragewhere did you get the fuel tank from?
I love ❤️ the sound of that little beast !!!
Lonnie’s mini bike sounds the best by far.
Lonnie's got the skinny for the win on the minibikes lol
Yeah I have always said I wish I could feel what the bikes are like at half the weight
Nice work yall!
Can't wait to see round 2 with the timing and coil swap. 😎👍👍
Should be doing it this week so stay tuned!
15:50 He does!
God bless
Lake of the Ozarks Missouri we had a storm last night that blew down a tree in our backyard that folded our fence. but it could have been worse. that engine sounds bad@ss, billet head looks sick af. thank u for the video. i know the time they take to film and edit.
Thank you for supporting us brother!
That is a phenomenal engine. Frightening rpms
gotta get on the Isky black mamba and black mamba jr cam.. GPS got a long shipping time vs omb..ill still order from both tho..do the briggs pvl setup and be done.
Can you make a video of the installation of an oil filter system on a predator 459cc please. Thank you 😊😊😊
I had the same problem with 1.3/356 combo on big block. Springs and all were correct but wouldn’t turn over 7k no matter what coil or anything. After braking 2 rocker adjusters I Ended up going down on camshaft and now it goes to 8500 no problem. It seems that the 1.3/356 combo needs more valve spring than it calls for because the ramp is so aggressive.
That’s exactly what we was thinking. I talked to a friend that builds engines as well and he has said the same thing. Thanks for the info. I think I will swap out to a .308 and try it again
Need 50lb or more spring pressure
@@cliftonnutter2484 I’m at 80lbs on the seat and still won’t keep up
@@oniefields83 a big block may need more because there is more weight to move. Small block valves, even big valves weigh less. Go powersports 301cc 275camshaft kit comes with 50lb so I would think you will almost double that for .462 left. My 385 ci. small block has a roller cam .550 lift with duel 150lb in it.
@@cliftonnutter2484 I’m running a dyno 335 now. Runs great
I think you should do a comparison with the Mo Flo head and the DEF head.
Great vid!! Thanks 🙏. ✌️❤️👊👊🤙
The lack of high RPM could be those 3/16 pushrods flexing at higher RPM , the reason for the 5/16 pushrods is to stop them from flexing.
It could be but I think it’s valve float. I’m going to try a .308 cam and see what happens.
@@RedBeardsGarage I had a Ford 302 that I built several years ago that I put a good set of stock diameter crome molly pushrods it with a very high lift cam, it would not rev past about 6000 RPM . A friend talked Me into ordering a set of 3/8 crome molly pushrods for it and they fixed the problem, after the new pushrods I was able to shift at 9200 RPM!
There's nothing like a small block Ford launching at 8500 and shifting at 9200!
I agree with the push rods. I built a 263r with the same .356 cam and 1.3 black Venoms. I had to put 5/16 cut to length rods in due to flexing with the duel springs at high rpm.
The flexing will make the engine feel like valve float
Excellent work
Drag race series would be a great way to get people into racing as this is relatively low cost (at the moment) have an entry level class 212/240 cc next 420/460 cc then unlimited turbo etc .come on guys you know you want to! 😁
what happened to all the high performance parts for the hf predator 660 ? seems people have what they have in stock with no plans to restock
Hey there, Red Beard! I like your shop and toys! Please give me your advice on carts. If a guy can rebuild an engine, port intakes, deck heads, etc; and wanted to spend about $500 on an engine, what would you recommend, building out an old 212 predator or buying a 15-16hp out of the box?
Need to race that against Charles Super Hog.
Looks like you need that head rb
Well Lonnie will always be faster so why not make him extra faster lol.
Maybe play with the coil gap and make sure the plug gap is on the tight side.
As s Texan from the south what’s most impressive is how the ground is green!! Everything is brown down here with no rain in the near future. 👎
We have had nothing but rain here.
How much less does Lonnie weigh?
How dependable is it driving in the woods will it break down or is it something you can drive all day
We have never had a problem. The red bike had tons of rides on the engine before I did a rebuild.
MAN! Im trying to set a speed record in a baby stroller. I could break 75 with an engine like that!
MR red beard what number belt are you using with that juggernaut?
I keep checking here waiting to see an update on the 883 sema cart. But they have not done anything nor said anything in over a year on it. So i guess nothing more coming on it.
Are these hot engines similar to those in a drag car in that the boost in performance takes away from longevity in a significant amount? Go Tellico by the way. Lol
I think Red could have caught Lonnie with a longer run when he was on Lonnie's bike. The difference in weight makes a big difference with a small engine.
What sprocket sizes do you use front and rear for that bike?
Dyno the diesel engine i have one and im very curious how much power it makes with the turbo plesse
What kind of fuel tank you usin im lookin for one like that
It’s on Amazon. I will add the link to the description.
its all about power to weight. I weigh 145 so I usually win too
If only I could be that size lol.
Excellent video as always. I'm always interested in making more power. curious why all of your engine projects are always utility engines that were never designed to make power. Why not use a zongshen 190, cr250, crf450 or multi-cylinder sport bike engine? Seems like a lot of money for a low performance platform. I mean no disrespect, I love your videos and everyone on your channel seem like good people. just curious why the attraction to utility engines
I just like using them in a way they were never intended. Of course it is easy to put a dirt bike engine on something and make power. We just like the whole process of building them up.
How long will that motor last like that?
next mod can it be a 4 5 9 ! so much better
Thank you for the Bible verse
*QUESTION TO MR RED BEARD…WHY AT THIS POINT IN Y’all Careers as “small engine builders” haven’t y’all switch to EFI”???
there are affordable EFI units such as mega squirt, Alpha X 2 chan and also Fueltech that are able to manage aka control a 1 or 2 cyl engines*
There pretty expensive to get everything to do one up with efi. We will one day but carbs are cheap and easy lol.
@@RedBeardsGarage facts. Thanks for replying👌🏻🤙🏻✌🏻
100 lbs makes a difference on these things ;)
Yooo but is it worth the money? I say 2 mins in...... 😂
I feel like it’s been so dang long since we had something long form or anything being final welded and powder coated😢
Yeah we have two chassis’s going to powder in the next week.
@@RedBeardsGarage I could feel it🤣
lol, the power to weight.
sorry bud, cars&cameras got ya beat at 39.8HP
My stock internal 212 makes more torque at 4400rpm. Also, LOL @ putting a $700 head on a $100 engine...
I’m real happy for you!
Hold up. Bone stock ghost with the exhaust kit they sell and I hit 57 mph on mine…..for a dollar difference of what? $800-$900??? What’s so special about that blue one? 15:36
MPH don't matter. Its how fast it will get to the MPH. You can have an engine with 100hp and one with 10hp and both have the same gearing, they'll make the same mph.
It gets it. Oh, I’ve got a a juggernaut as well. It’ll hit 35 extra quick and pull to 57 about 4 sec after. That’s super difficult to justify the massive price difference. Unless you can explain. I can’t see any real benefit.
timing...
Put on a 15T cheetah clutch & a 40 rear sprocket ⚙️ ……..Road to 100mph
Whoop!!!
What bike frame is that??
Mb200 trial master