OMG FINALLY someone did this video. I've been asking questions on Reddit and looking for something like this. For some reason this video never appeared in my searches until now. Thank you for producing this, super helpful.
It's really weird to me that more people aren't buying and reviewing this setup. Thanks to your video I just ordered the exact same setup. Medium board with lvl 12 PSU. Thanks to the mini pedals I have, I can easily fit a seriously varied and complex set of pedals on this thing.
Thank you so much, you just answered my question of if the LVL12 will fit in the medium board. I ordered the LVL8 but really need the LVL12 which is fine I'll keep the 8 as a backup or for another board, I'll order my LVL12 this week since the board won't be here for another 3 days. To me they're definitely worth the money for the board AND the power supply! For the plastic feet I'm planning to drill through them so they won't get lost and run a screw and locknut to secure them. Also going to coat the plastic with some liquid rubber so it doesn't slide on smooth surface floors. Don't forget to use a hair dryer to heat up your Velcro so it sticks better also ;).
Pro-tip: The rubber push-on feet have metal inside. When you figure out where you want them, just squeeze them closed a bit and they grip the aluminum tightly.
@@brayrowleybass The real problem is the mount for the Fender power supply. Fender really goofed that up. Here's the fix: two 1/4" tall nylon spacers for the screws, and a pack of 3M command strips from the hardware store. Now the PS is tight, and the bracket is not warped at all, the screws are snug - and still easily disassembled.
Just a question ( as I have the lv12 & am thinking about getting this pedalboard in medium too ) But Should the power supply not be the other way around . So it says Fender the correct way up ? Whist looking at the back of the board ?
Hi thanks for this video. Pretty cool with black and pink and i am pretty sure that the sounds are awesome. Just one weird question : i personaly would recommand to put the line6 at the bottom to be easier to be controlled by foot. You should not play with the other switches once properly configured ? Or i missed someting?
Hey! For this board I was using the stomp for amp sim, modulation, and a couple delays and reverbs. I placed drive pedals below because I would be utilizing those more often than the effects in the stomp. That is why I chose that placement. However that board is long gone, but was nice while it lasted! 😂🤠🎸
Question, You talk about stuff, but when it actually comes to wiring it all in you fast forward so we can’t see how you’ve done it. Eg, Power leads to the pedals and how you connected them up so they don’t get ripped out moving it about.
@@brayrowleybass I think so, I got the fender board, the big one for pro set up. Was looking around about the best way to both mount and wire it all in correctly so there would be no lose cables, wobbly pedals ect ect. From all the searches yours was the closest. Another one about the board and mounting his pedals went on about the pedals and nothing about assembling it’s. So, yes. Not necessarily pedal order (but would help people) but way to run Velcro ( for and against each way) running patch leads,power cables then for this fender board attaching it all to the board it’s self as well. That would be too late for me now, but will help other people.
i agree i was waiting for the explanation on those cable management system indentations on the board, he didn't mention it, thumbs down on the video and no i will not got to the Instagram page.. guess ill look elsewhere for that information
I can’t say for sure! I’m using the medium sized board here and the LVL 12 fits just fine, so I would assume it fits on the small board but I’m not 100% certain!
See right there Instagram/Facebook' all that social media crap and you're still talking through your nose when you could have gone to your local community college and studied to become a surgeon and been a cattle caller on a cattle ranch.
OMG FINALLY someone did this video. I've been asking questions on Reddit and looking for something like this. For some reason this video never appeared in my searches until now. Thank you for producing this, super helpful.
Thanks for watching! 🤠🎸
It's really weird to me that more people aren't buying and reviewing this setup. Thanks to your video I just ordered the exact same setup. Medium board with lvl 12 PSU. Thanks to the mini pedals I have, I can easily fit a seriously varied and complex set of pedals on this thing.
Glad you liked the video! I could see price playing a factor in this one, but in my opinion it’s definitely worth it! 🤠🎸
Thank you so much, you just answered my question of if the LVL12 will fit in the medium board. I ordered the LVL8 but really need the LVL12 which is fine I'll keep the 8 as a backup or for another board, I'll order my LVL12 this week since the board won't be here for another 3 days. To me they're definitely worth the money for the board AND the power supply! For the plastic feet I'm planning to drill through them so they won't get lost and run a screw and locknut to secure them. Also going to coat the plastic with some liquid rubber so it doesn't slide on smooth surface floors.
Don't forget to use a hair dryer to heat up your Velcro so it sticks better also ;).
my OCD got real when you out the power supply upside down
🙃
Pro-tip: The rubber push-on feet have metal inside. When you figure out where you want them, just squeeze them closed a bit and they grip the aluminum tightly.
👏🏼
@@brayrowleybass The real problem is the mount for the Fender power supply. Fender really goofed that up. Here's the fix: two 1/4" tall nylon spacers for the screws, and a pack of 3M command strips from the hardware store. Now the PS is tight, and the bracket is not warped at all, the screws are snug - and still easily disassembled.
I have the exact same board and power supply. Turned up today. That's why I'm watching because Fender doesn't have anything in the manual.
Nice! If you have any questions let me know! 🤠🎸
Just a question ( as I have the lv12 & am thinking about getting this pedalboard in medium too ) But Should the power supply not be the other way around . So it says Fender the correct way up ? Whist looking at the back of the board ?
Yessir! I just wanted my 90 degree IEC to point a certain direction. 🤠🎸
Hi thanks for this video. Pretty cool with black and pink and i am pretty sure that the sounds are awesome. Just one weird question : i personaly would recommand to put the line6 at the bottom to be easier to be controlled by foot. You should not play with the other switches once properly configured ? Or i missed someting?
Hey! For this board I was using the stomp for amp sim, modulation, and a couple delays and reverbs. I placed drive pedals below because I would be utilizing those more often than the effects in the stomp. That is why I chose that placement. However that board is long gone, but was nice while it lasted! 😂🤠🎸
Awesome video. The fender style looks slick
Thanks! Make sure you check out the update video! It answers some questions! 🤠🎸
Dude! Such a cool board!
thanks mate
Hey Bray, nice board!! Did the HX stomp take more than one spot on the fender engine room 12?
Yes! I ended up using a 2-1 splitter. Check the real MWB board update video for more info! 🤠🎸🤝🏼
How did you power the hx stomp? Did u use the fender lvl 12?
Check out the MWB! Board update video! I had to order a splitter cable! 🤠🎸
Hey dud, your Instagram power supply is upsidedown
Thanks bud 🤠
Awesome board man! What do you think of the stomp compared to the stomp xl?
It’s so good! Love having the extra foot switches at a reasonable size, and I love the amp and cabs line 6 offers! 🤠🎸
Is that aluminum? What material is it made of? And how thick is the metal? 2mm
Yup! Anodized aluminum! Not sure about the thickness 🤠🎸
Question,
You talk about stuff, but when it actually comes to wiring it all in you fast forward so we can’t see how you’ve done it.
Eg,
Power leads to the pedals and how you connected them up so they don’t get ripped out moving it about.
I was thinking about doing an update video, would that be helpful?
@@brayrowleybass I think so, I got the fender board, the big one for pro set up. Was looking around about the best way to both mount and wire it all in correctly so there would be no lose cables, wobbly pedals ect ect. From all the searches yours was the closest.
Another one about the board and mounting his pedals went on about the pedals and nothing about assembling it’s.
So, yes. Not necessarily pedal order (but would help people) but way to run Velcro ( for and against each way) running patch leads,power cables then for this fender board attaching it all to the board it’s self as well.
That would be too late for me now, but will help other people.
i agree i was waiting for the explanation on those cable management system indentations on the board, he didn't mention it, thumbs down on the video and no i will not got to the Instagram page.. guess ill look elsewhere for that information
Really great review. I’ve been curious about this pedalboard for a while. Liked and Subbed #128
🤠🎸❤️
how are you powering the stomp xl? with included cabling?
Update video coming July 11th at 8pm! 🤠 all questions will be answered!
Is the engine lvl12 can fit in fender small pedalboard?
I can’t say for sure! I’m using the medium sized board here and the LVL 12 fits just fine, so I would assume it fits on the small board but I’m not 100% certain!
Yes it does, just got that configuration myself.
I wish they sold this in the UK.
Looks like they’re available on the andertons website!
Alright How did you power the stomp with the fender power supply haha
But what Is an instagram pedalboard and how It differs from a regular pedalboard?
Yes
its for idiots that just want it to look pretty and get likes on instagram.
Pink 1981 DRV?
That would be sick!
See right there Instagram/Facebook' all that social media crap and you're still talking through your nose when you could have gone to your local community college and studied to become a surgeon and been a cattle caller on a cattle ranch.
💀😂🤠🎸