Thanks for making life easier for me with my Mikuni VM 36 on my 1979 Suzuki PE 250 N it’s dumping fuel out of the Overflow pipe so I’ll go ahead now and try and get it sorted 😉👍 And Best wishes to all in Australia 🇦🇺 from 🏴🇬🇧
I dont mean to be offtopic but does any of you know a trick to log back into an Instagram account?? I somehow forgot the login password. I love any tricks you can give me.
@Wallace Nehemiah i really appreciate your reply. I found the site through google and I'm in the hacking process atm. Takes a while so I will get back to you later with my results.
Hey I have a question about a Mikuni Carburetor and am a little confused about it. It is 36mm on the outside and 30.5mm on the inside and on the side of the carb it has 25C 00 what does that mean ? It has a round side and a VM model but not really for sure which one I need to order......
My bike will only rev up with the chokes on, it won’t rev with them off. It just goes blahhhhhhhttt and dies. The plugs have always been very sooty and black, which tells me it’s too rich. Since the Mikuni starter circuit is different from a standard choke, is it giving me more air to the mixture while it’s on and throttle opened? Which is why it can then rev with the choke on? With the throttle closed, it will barely idle with the starter circuit on. Been chasing down the tuning with these carbs for weeks. Air screw is almost falling out to achieve a rise in rpms; I have smaller pilot jets on the way. Any help would be greatly appreciated. Honda 400cc with Mikuni VM 32’s.
Sir, can you tell me what the black rubber like piece on the top of the VM36 carb is for? After I kept watching your video, it appears that it is for the throttle cable, correct? Thx.
It is COMPULSORY that you use AND tell people to use Japanese Industry Standard (JIS) screwdrivers on Mikuni Carbs (or any other Japanese product. Philips WILL always cam-out and damage the JIS screwheads. Lots of videos on RUclips
This is by far the most helpful video I've seen explaining the VM34, thank you!
Thanks for making life easier for me with my Mikuni VM 36 on my 1979 Suzuki PE 250 N it’s dumping fuel out of the Overflow pipe so I’ll go ahead now and try and get it sorted 😉👍 And Best wishes to all in Australia 🇦🇺 from 🏴🇬🇧
Hugely helpful!! I didn't realize that the main jet was in the side. I thought that was just a bowl drain!!
@19:30 for cable install. Great demonstration. Thanks.
Very informative, thanks.
Those tubes : I thought ......well let's just forget what I thought,
glad to hear what they really do.
One of the best Info on this video👍 hard to find good info on this specific topic
Thx for this helpful Video. Love the detailing, best regards feom germany 👌👌
Awesome great help best vid I have found!
Great video. Thank you 👍
Great video, thanks
Awesome job!
I dont mean to be offtopic but does any of you know a trick to log back into an Instagram account??
I somehow forgot the login password. I love any tricks you can give me.
@Edison Tanner instablaster ;)
@Wallace Nehemiah i really appreciate your reply. I found the site through google and I'm in the hacking process atm.
Takes a while so I will get back to you later with my results.
@Wallace Nehemiah It did the trick and I now got access to my account again. I am so happy:D
Thanks so much you saved my ass !
@Edison Tanner No problem :D
fantastic. thanks
Hey I have a question about a Mikuni Carburetor and am a little confused about it. It is 36mm on the outside and 30.5mm on the inside and on the side of the carb it has 25C 00 what does that mean ? It has a round side and a VM model but not really for sure which one I need to order......
Hi. I have got an XF650 Freewind. Twin carbs is just trouble. I want to change to a single one (DR650).
Is there a manifold available?
What size carb would you put on a kawasaki ex250 ninja wanting to run a single carb
My bike will only rev up with the chokes on, it won’t rev with them off. It just goes blahhhhhhhttt and dies. The plugs have always been very sooty and black, which tells me it’s too rich. Since the Mikuni starter circuit is different from a standard choke, is it giving me more air to the mixture while it’s on and throttle opened? Which is why it can then rev with the choke on? With the throttle closed, it will barely idle with the starter circuit on. Been chasing down the tuning with these carbs for weeks. Air screw is almost falling out to achieve a rise in rpms; I have smaller pilot jets on the way. Any help would be greatly appreciated. Honda 400cc with Mikuni VM 32’s.
I wanted to order carburettor how do I do it I'm from india
how do you know what needle goes with what needle jet?
How can I tell what size VM I have? Do I measure the inner diameter of the inlet spigot?
hello I'm Aditya from Mumbai India can u please suggest me which carb install in my old Royal enfiled 1999 model
?
Sir, can you tell me what the black rubber like piece on the top of the VM36 carb is for? After I kept watching your video, it appears that it is for the throttle cable, correct? Thx.
it's a dust cap basically that keeps stuff out of the cable area
Can i use a mikuni vm30-83 on a yz125?
My carb has 2 bowl equalizer tube nipples one on either side whats the purpose of the second one
Do one on TM please
Hi would you have a vm to fit suzuki ts 250k 1973?
Ts 250 K would have left the factory with a VM 28SH !! If you need any more help leave a comment
this guy is Australiaing pretty fucking hard, thought Big Lez or Sasso might come in at any moment.
My VM 13 came on a new bike in 2020, brass floats
It is COMPULSORY that you use AND tell people to use Japanese Industry Standard (JIS) screwdrivers on Mikuni Carbs (or any other Japanese product. Philips WILL always cam-out and damage the JIS screwheads. Lots of videos on RUclips
ALWAYS USE INSULATED TOOLS ON CARBS.. LMAO MATE!