MS03c. [Siemens Motion Control] Reset, Power, Home, and MoveJog Instructions in TIA Portal [5/10]

#Axis #TIAPortal #MotionControl
Next：MS03d. • MS03d. [Siemens Motion...
Playlist: • Motion Control
MS01. Video Series Open Speech
• MS01. [Siemens Motion ...
MS02. 9 Common Questions About Siemens Motion Control
• MS02. [Siemens Motion ...
MS03a. Single Axis Control - Project Introduction
• MS03a. [Siemens Motion...
MS03b. TIA Portal Technology Object (TO) Configuration
• MS03b. [Siemens Motion...
MS03c. Reset, Power, Home, and MoveJog Instructions
• MS03c. [Siemens Motion...
MS03d. Move Absolute, Relative, Velocity, Stop, and Halt Instructions
• MS03d. [Siemens Motion...
MS03e. Download Axis and Program into PLCSIM, OB91 Buffer Overflow Solved
• COM18. ModbusTCP Clien...
MS03f. Online Axis Test via Axis Control Panel
• MS03f. [Siemens Motion...
MS03g. Rotary and Linear Motion Control Online Test
• MS03g. [Siemens Motion...

[@jayadhiwenardo2474]

Nice and structural explanation. Cant wait for another video !

[@electricalautomation]

Thanks for watching! I am working on them, will launch the online test next week.

[@fernandocadena_]

Nice!

[@raizasm4817]

Thanks! The Info was so useful to my project

[@electricalautomation]

I am so glad the video would be helpful! Feel free to send me emails if you have any questions.

[@tammamch1749]

Perfect explanation 👍

[@electricalautomation]

Glad you like it, Thanks for watching!

[@shaikabdulkhader8548]

Great video👍

[@electricalautomation]

Thanks for watching! Welcome to my channel! Welcome forward to more friends!

[@vitaliikorenevich9315]

Teacher, you are the best!

[@electricalautomation]

Thanks! Glad you like the videos.

[@questy44]

Very useful, thank you

[@electricalautomation]

Glad it was helpful!

[@bousnanemessaoud2677]

Verry good job.

[@electricalautomation]

Welcome!

[@Bigmallone]

very useful video

[@electricalautomation]

Enjoy!

[@user-hf2oh8sz8c]

thank you

[@electricalautomation]

Welcome! Enjoy

[@tarekmohsen7572]

Thanks

[@electricalautomation]

Welcome to my channel!

[@erdaltas1691]

Hello, I am Erdal. I'm glad I found your channel :)) you have very useful videos. I watched this video of yours and it is a really nice method. I will use FB for the 3 axis v90 servo in my project. :)))Thank you very much.
I watched your MS05 video series. really nice. You have explained Mc_GearIn. We would like you to explain other synchronous motion commands. Because there are very few synchronous motion videos that explain it as beautifully as you do. For example, we would be very happy if you create a video about Mc_CamIn and creating a Cam diagram. thanks

[@electricalautomation]

Hi Erdal, Thanks for your watching? Are you using S7-1500 or S7-1500T?

[@erdaltas1691]

@@electricalautomation S7 1500T,thank you

[@electricalautomation]

@@erdaltas1691 I am able to prepare some videos about the gear/cam by using S7-1500T. But I am temporarily very busy these weeks. So I am plan them, thanks！

[@erdaltas1691]

@@electricalautomation thank you very much. I wish you ease in your works.

[@hienongxuan3588]

Can you explain for me?
Mode 0 only set the current posittion to the HOME root 1 time initially. And the next time I want to reinstall, do I have to reset?

[@elizeusimoes490]

👍👍👍👍👍👍🤝

[@electricalautomation]

Thanks!

[@manojthorat6421]

can you please make a video on SINA_PARA_S function block to read & write the servo drive parameters that would be very much helpfull for users. because i couldnt find any video on youtube related to this topic.Thanks a lot

[@electricalautomation]

cache.industry.siemens.com/dl/files/970/109475970/att_842192/v1/FAQ-04EP6Z7Q_read_write_parameter_using_FB287_EN.pdf
I think this link would be helpful. SINA_PARA_S is mainly used for G drives. But I don't have them.

[@toosalty4502]

@Electrical Automation Hands-On 3:12 why not just use the drag and dropped Technology object positioning axis instead of creating an extra parameter? that wasnt clear to me

[@electricalautomation]

Thanks for watching! The MC function blocks are programmed in a Function Block. This Function Block can be used as your personal motion control template. Therefore, the TO was connected as a IN/OUT interface. So in future, if you have >10 axis in one system, it will be very easy to use

[@xingyuan5724]

讲的不错，兄台哪里高就啊

[@electricalautomation]

North America

[@adelmaher286]

HOW TO DESIGN PLC CONTROLLED DUAL-AXIS SOLAR TRACKING SYSTEM

[@electricalautomation]

Are you doing the research real industrial project or study and thesis project ? You can find my email to me for the detail introduction.

[@vijayabaskar9775]

How to increase or decrease the torque, sir

[@electricalautomation]

The torque control loop is within the drive and controlled by current loop. Unless you are using Torque control mode for your servo drive. But you could use torque reduction control. pls see MS05k. [Siemens S120 #9] SINAMICS S120 Drive Torque Limitation, Torque Reduction ruclips.net/video/CpvjDHYWwvs/видео.html

[@RohitChavan™]

Where to find the project file

[@electricalautomation]

As shown in the video

[@NaveenKumar-sy9tr]

why cant we use L-axis Control?

[@electricalautomation]

Sorry, not quite understand your question. Would you please explain more.

[@NaveenKumar-sy9tr]

@@electricalautomation I mean using siemens library "LaxisCtrl_Axis". It have all options in single block. support.industry.siemens.com/cs/document/109749348/simatic-s7-1500-s7-1500t%3A-standard-application-axis-control?dti=0&lc=en-US

[@NaveenKumar-sy9tr]

If possible, please make a video on this library.

[@electricalautomation]

@@NaveenKumar-sy9trThanks Navven. Yes, "LaxisCtrl_Axis" is in my plan. The reason why I showed motion control as the individual style is to allow the new leaner to know the detail component of the motion control FB. "LaxisCtrl_Axis" is a efficient 'tool', but it still would be nice to learn how/what tits behind at first.