Hi ! One question, if you read the comments 😂 The Behringer splitter is supposed to receive mike level hi-impedance signals, isn't it ? The electronic drumkit and your boss gt1000 send line level low-impedance levels. So how do you manage this ? Do you have DI boxes between your line devices and the splitter inputs ? Thanks for the answer 😊
I'm just looking for a video on how to connect in-ear monitors/transmitter on an analog mixer? Digital Mixers are way too expensive for us and we're just using regular mixers
Essentially you need to be able to send a mix to your in ear monitors. Whatever monitor outputs your mixer has, including phones, connect that to your in-ear transmitter and you’re set. Think of the ears as an on stage monitor speaker.
XR18 is a decent mixer, except for the wifi. They should've left it out it's so bad. The USB-C connector, though, like USB itself in the 90s required Apple to bring everyone else forward.
The laptop has been great! Only issue I have had was when the wifi would randomly try to connect to an internet source, sometimes changing completely, and in those moments Ableton would glitch. At gigs now I turn wifi off and run an iPad for X-Air, and only have Ableton on the laptop. Works a treat.
No haven’t had any noise. Only negative feedback would be that 1 input is now stuck with a lead in it, it won’t unclip 😂 but other than that it’s been fine The Art S8s will be good, at that price point it’ll be well worth it.
I'm using the XR18 also. Do you know how I would get ableton to send CC messages to the headrush pedalboard to change scenes and stomps? I know how to insert a midi track in ableton, I know how to create a midi clip but thats about it. The XR18 is set up with Ableton and works just fine. I can record and all but I can't get Ableton to send CC messages through the XR18 and into the Headrush. I have a midi cable from the XR18 out to the midi IN on the Headrush but cant seem to get it to change automatically when it hits the midi clip. Maybe I just don't have the Headrush set up correctly for this to work? Any help would be greatly appreciated.
@@DaveWebbMusic Gotcha. I just got the x32 and saw several folks using different apps and was trying to find the best one to use. Thanks for replying and good luck with the band!
You don't need to automate the click, there's an easier way to do it. use the follow butten and just write inn the tempo for every song, and save, then you dont need to write in the automations every time you make a new set..
I have discovered that since shooting this. Makes things soooo much easier! Also found that building a click track for each song helped too. Seems counter intuitive, but personally preferable.
As far as I can tell, the XR18 can NOT receive a midi clock for delays. It’s so irritating! If you do find something, let me know!! But so far, nothin.
Backing tracks are amazing. gives the punters the full concent vibes.
Exact the way our band is set up. Thank you!
Awesome!
Nice video. Should look at the Airstep Midi controller
AIRSTEP controllers are great. I don’t have the one you’re referring too, but I do have the AIRSTEP Katana & AIRSTEP Play. Really great devices!
Hi ! One question, if you read the comments 😂
The Behringer splitter is supposed to receive mike level hi-impedance signals, isn't it ? The electronic drumkit and your boss gt1000 send line level low-impedance levels. So how do you manage this ? Do you have DI boxes between your line devices and the splitter inputs ?
Thanks for the answer 😊
Any help on where to find out how to send midi notes from your daw to your pedal and to the morning star to select songs, stop and play?
I'm just looking for a video on how to connect in-ear monitors/transmitter on an analog mixer?
Digital Mixers are way too expensive for us and we're just using regular mixers
Essentially you need to be able to send a mix to your in ear monitors.
Whatever monitor outputs your mixer has, including phones, connect that to your in-ear transmitter and you’re set.
Think of the ears as an on stage monitor speaker.
XR18 is a decent mixer, except for the wifi. They should've left it out it's so bad.
The USB-C connector, though, like USB itself in the 90s required Apple to bring everyone else forward.
The wifi is so bad! I use an Apple wifi thing.
Overall though it does all I need it to for now.
@@DaveWebbMusic I really like it, it's just the old why didn't they spend another dollar or two on the wifi chips?
Agree 100%!
How has the reliability of your laptop held up. Any problems with crashes?
The laptop has been great! Only issue I have had was when the wifi would randomly try to connect to an internet source, sometimes changing completely, and in those moments Ableton would glitch.
At gigs now I turn wifi off and run an iPad for X-Air, and only have Ableton on the laptop.
Works a treat.
Do you experience noise with your MS8000? i've been on the fence with them and im choosing the Art S8s
No haven’t had any noise. Only negative feedback would be that 1 input is now stuck with a lead in it, it won’t unclip 😂 but other than that it’s been fine
The Art S8s will be good, at that price point it’ll be well worth it.
I bet one day your better venues,Theatre’s clubs. Will have a set up all ready and all you need is your inears…..maybe? It would be cool.
I'm using the XR18 also. Do you know how I would get ableton to send CC messages to the headrush pedalboard to change scenes and stomps? I know how to insert a midi track in ableton, I know how to create a midi clip but thats about it. The XR18 is set up with Ableton and works just fine. I can record and all but I can't get Ableton to send CC messages through the XR18 and into the Headrush. I have a midi cable from the XR18 out to the midi IN on the Headrush but cant seem to get it to change automatically when it hits the midi clip. Maybe I just don't have the Headrush set up correctly for this to work? Any help would be greatly appreciated.
Hey mate. Shot a video for you today showing how to achieve it.
Will hopefully get it up tonight, and I will put the link here for you. 🤘🏼
ruclips.net/video/mVQahnkLjx0/видео.html
Hey man. Here it is 🤘🏼
Would love to hear how you go.
Awesome. Thank you so much. This will help many people.
Hi, It is not CC is PC, i know how to do It with cubase
Mantab Bossseee 👍👍
I've seen a few apps, which one are you using?
This is the X-Air app for the XR18 Behringer Mixer.
@@DaveWebbMusic Gotcha. I just got the x32 and saw several folks using different apps and was trying to find the best one to use. Thanks for replying and good luck with the band!
You don't need to automate the click, there's an easier way to do it. use the follow butten and just write inn the tempo for every song, and save, then you dont need to write in the automations every time you make a new set..
I have discovered that since shooting this. Makes things soooo much easier!
Also found that building a click track for each song helped too. Seems counter intuitive, but personally preferable.
HOW DOES X RECIVE MIDI TEMPO FROM ABLETON 4 X DELAYS??
As far as I can tell, the XR18 can NOT receive a midi clock for delays. It’s so irritating!
If you do find something, let me know!! But so far, nothin.