If you have problems starting devices after installing eNSP, like the hashes happening constantly or error codes like 40 or 42, this video is the common workarounds that I recommend trying. ruclips.net/video/Kecte0rp9XI/видео.html
Awesome video brother, i need assistance in stack configuration of S6730-H24x6c & S5735-S48P4XE-V2 Switches, can i test in eNSP or can you please suggest something.
To my knowledge, eNSP doesn't support iStack/Stack setups. Here are two articles from Huawei's forums that may help you out: Old one support.huawei.com/enterprise/en/doc/EDOC1000094241 New one support.huawei.com/enterprise/en/doc/EDOC1100137947/cb36698d/example-for-establishing-a-stack-of-two-switches-connecting-cables-and-then-configuring-software If you have the VRP images on hand, I have read somewhere that you can get it working in EVE-NG, but I still haven't gotten arround to experimenting with that yet.
Have you checked the Troubleshooting video (ruclips.net/video/Kecte0rp9XI/видео.html)? If you have re-registered the devices, and still getting error 40, these are the top causes: Virtualbox is being blocked by Windows - ensure you are on V5.2.44. Your CPU's virtualization features are not turned on in the BIOS. "Memory Integrity" is turned on in the "Core Isolation" settings and needs to be turned off.
Any Fix for Oracle VM Virtual Box setup wizard ended Prematurely? followed every step but when updating to the new version of oracle it gives this error
Thank You for your information,I couldn't execute the WLAN projects due to WLAN access controller images missing.Where do i get those wlan AC6005 and AC6605 images.
I haven't seen that happen before, but you should be able to go to "Menu" in the top right corner, choose "Tools", the "Register Devices" and check the "AC_Base" box and choose register. Just make sure that you delete any devices in the toplogy file when re-registering or it wont take. Worst case, you might need to re-install to sort the WLAN_AC Image.
The USG5500 should launch. The USG6000V will need the missing image file added. I have a video about the missing images and a download link for them here: ruclips.net/video/WH7xrq8Mqx8/видео.html
@@darkbirdtech8023is usg5500 could run on ensp win 11 sir? cause I have some issues with never ending hashtag loading when the firewall has been booting on my virtual lab
Well, I have a troubleshooting video that covers most issues for Windows 10 ruclips.net/video/Kecte0rp9XI/видео.html I did pin that and put a video card in the video. Please try what I suggest in that video and let me know if you still have issues.
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
If you have problems starting devices after installing eNSP, like the hashes happening constantly or error codes like 40 or 42, this video is the common workarounds that I recommend trying.
ruclips.net/video/Kecte0rp9XI/видео.html
Very useful, thank you so much. I almost gave up before.😁
Very helpful ❤
life saver man thank you very much
Awesome video brother, i need assistance in stack configuration of S6730-H24x6c & S5735-S48P4XE-V2 Switches, can i test in eNSP or can you please suggest something.
To my knowledge, eNSP doesn't support iStack/Stack setups.
Here are two articles from Huawei's forums that may help you out:
Old one support.huawei.com/enterprise/en/doc/EDOC1000094241
New one support.huawei.com/enterprise/en/doc/EDOC1100137947/cb36698d/example-for-establishing-a-stack-of-two-switches-connecting-cables-and-then-configuring-software
If you have the VRP images on hand, I have read somewhere that you can get it working in EVE-NG, but I still haven't gotten arround to experimenting with that yet.
My devices are still refusing to start, I'm getting error 40. I've even registered devices. What do I do?
Have you checked the Troubleshooting video (ruclips.net/video/Kecte0rp9XI/видео.html)?
If you have re-registered the devices, and still getting error 40, these are the top causes:
Virtualbox is being blocked by Windows - ensure you are on V5.2.44.
Your CPU's virtualization features are not turned on in the BIOS.
"Memory Integrity" is turned on in the "Core Isolation" settings and needs to be turned off.
I've watched the video and I decided to use a VM and now it's working fine, thanks 🫶🏾
Any Fix for Oracle VM Virtual Box setup wizard ended Prematurely?
followed every step but when updating to the new version of oracle it gives this error
I haven't encountered that. Try right clicking on the installer and running as administrator and see if that helps.
Same
Thank You for your information,I couldn't execute the WLAN projects due to WLAN access controller images missing.Where do i get those wlan AC6005 and AC6605 images.
I haven't seen that happen before, but you should be able to go to "Menu" in the top right corner, choose "Tools", the "Register Devices" and check the "AC_Base" box and choose register. Just make sure that you delete any devices in the toplogy file when re-registering or it wont take.
Worst case, you might need to re-install to sort the WLAN_AC Image.
@@darkbirdtech8023.Oh Really thank you very much.Once i have followed your step to register devices and now it works fine.SOLVED
could you run the firewall? well I can't run the firewall on ensp
The USG5500 should launch. The USG6000V will need the missing image file added. I have a video about the missing images and a download link for them here: ruclips.net/video/WH7xrq8Mqx8/видео.html
@@darkbirdtech8023is usg5500 could run on ensp win 11 sir? cause I have some issues with never ending hashtag loading when the firewall has been booting on my virtual lab
Hii bro can you send me a link of eNSP where you loaded it..
It's in the video description.
But here it is anyway drive.google.com/drive/folders/12fJavh2iSNC17lglUKRRleyWAHAT9iUq
@@darkbirdtech8023 thanks bro I m downloading now
##### until infinity
Well, I have a troubleshooting video that covers most issues for Windows 10 ruclips.net/video/Kecte0rp9XI/видео.html
I did pin that and put a video card in the video.
Please try what I suggest in that video and let me know if you still have issues.
@@darkbirdtech8023 thank you .
Did you come right?