ASG CZ Scorpion EVO: How to flat hop a EVO with Tru Hop and Modify Flat Hop

Поделиться
HTML-код
  • Опубликовано: 7 фев 2025
  • You do not need to R-hop the barrel. I apologize for saying it on the video, for whatever reason I thought of r-hopping... my bad. All the steps are the same to flat hop the EVO regardless of barrel. Thanks for supporting ASG and thank you for watching. Below are bookmarks to skip over the boring rants of an old man (this video is long af). Feel free to skip ahead to whichever mod you are trying to install.
    Tru Hop Install: 1:30
    Flat Hop (Modify Flat Hop): 13:00
    For whatever reason if you want to r-hop your barrel check out the following links below:
    Snakebitey's How to R-hop video
    • How to R-hop an airsof...
    Kilo Two-One R-hop (Z-Kit) Installation Video:
    • How to Install an Rhop...

Комментарии • 27

  • @mostafafawaz1
    @mostafafawaz1 4 года назад +5

    I was really nervous about opening up my scorpion and messing with the internals but your videos really helped. Really appreciate the detailed breakdowns!

  • @HenrikHermannKristiansen
    @HenrikHermannKristiansen 3 месяца назад

    Have you done the video with testing of accuracy between the 2 systems yet? Really nice video, made me confident to open up my scorpion for the first time and also the first time i ever opened up an AEG :-)

  • @user-jm5hg3qi4f
    @user-jm5hg3qi4f 4 года назад +3

    Please make a accuracy video. Just got the new evo. And want to make it even better with time. 😊Thinking PDI barrel and a new hop up.

  • @KineticsReborn
    @KineticsReborn 3 года назад +1

    He skips the 'tedious' part
    That's the part I needed to see!
    NEVER skip that stuff in tutorials

  • @davidbailey6932
    @davidbailey6932 5 лет назад +1

    Again, you are awesome and appreciate the video!

  • @chrisberry3048
    @chrisberry3048 4 года назад

    Hi I'm new to HPA and Evo. I'm getting problems with the engine locking open and trapping a round in the breach. I have to use an unjamming rod to.clear it. Some suggest taking off all the hop. I have no.clicking noise on my hop. Some suggest a super.macaron bucking. Have bought a.chrono to check.and set dwell and ROF

    • @Gomeazy
      @Gomeazy  4 года назад

      It’s hard to say for sure what the problem is without seeing it first hand however there was a common issue with the hpa evo when I was working at ASG. My guess is if you’re still using the stock bucking then the nozzle is jamming due to the bucking lips. I suggest cutting a few mms off the lips or getting a 70 degree new bucking to solve your issue. Select a good quality bucking of your choice and that should solve your issue. I recommend Madbull Red, Prommy Purple, Maple Leaf Blue, and some say Modify but as long as the bucking has good overall rep go with your preference.

  • @brandengreer3414
    @brandengreer3414 5 лет назад

    Great video! So was the Tru Hop better than the Flat Hop?

    • @Gomeazy
      @Gomeazy  5 лет назад

      Branden Greer Hi thanks for your comment. To answer your question, I found that the TruHop is slightly better than the flat hop (not by much tbh).

    • @brandengreer3414
      @brandengreer3414 5 лет назад +1

      Jose Gomez Sweet! I already put in an order for the tru hop. I was just worrying about it, so thank you for your quick reply to give me piece of mind! Haha.

  • @swheelerc
    @swheelerc 5 лет назад

    Thanks for the Vid! what did you find regarding accuracy for them both?

    • @Gomeazy
      @Gomeazy  5 лет назад

      Regarding accuracy, they both we're similar upon my limited and controlled tests. Both buckings had similar groupings with TruHop being slightly better. My shooting tube only goes out to 33feet (11M) so take my results with a grain of salt hahaaha.

  • @Hyperwing0
    @Hyperwing0 5 лет назад

    Cuando instalaste el flat con el nub transparente. Es necesario quitarle la pieza que removiste del hop up? Pretendo instalar el firefly ¿seria el mismo procedimiemto?. Gracias

    • @Gomeazy
      @Gomeazy  5 лет назад

      rodrigo osorio si vas a instalar el firefly nub, no tienes de remover la pieza del hopup. El proceso que ese es solamente para el Tru Hop. Para el firefly recemedo que buscas un video que enseña instalar un “flat hop”. Es muy fácil y va ser el mismo con todo los AEGs, Scorpion EVO incluido.

    • @Hyperwing0
      @Hyperwing0 5 лет назад

      @@Gomeazy Muchas Gracias por tu respuesta. es difícil encontrar asesoría para las evos en español. Saludos

    • @Hyperwing0
      @Hyperwing0 5 лет назад

      Una duda estimado. Para los bucking (prometeus morado) habria que quitarle sus partes interiores para que tenga una mejor funcion en nub firefly?

    • @Gomeazy
      @Gomeazy  5 лет назад

      rodrigo osorio si, va ser un standard flat hop instilación.

  • @MrGoogle87
    @MrGoogle87 3 года назад

    Did it make it better, if so: how much?

    • @Gomeazy
      @Gomeazy  3 года назад

      Its hard to tell in a 100 foot tube but it helped the grouping ever so slightly,.

  • @pavelpekarek8173
    @pavelpekarek8173 5 лет назад

    So there is no problem R-hoping the EVO ?

    • @Gomeazy
      @Gomeazy  5 лет назад

      Pavel Pekarek no problem as long as you do it right.

  • @DAVIDGarcia-ig1vk
    @DAVIDGarcia-ig1vk 5 лет назад

    Hola hablas español?

    • @Gomeazy
      @Gomeazy  5 лет назад +1

      DAVID Garcia Hola David, si hablo español pero muy limitado jaja.

    • @DAVIDGarcia-ig1vk
      @DAVIDGarcia-ig1vk 5 лет назад

      @@Gomeazy pues necesito ayuda con mi Evo scorpion

    • @Gomeazy
      @Gomeazy  5 лет назад

      @@DAVIDGarcia-ig1vk por fabor mandame un email a techsupport-us@actionsportgames.com. Ayi le puedo ayudar mas con fotos si necessitamos.

    • @DAVIDGarcia-ig1vk
      @DAVIDGarcia-ig1vk 5 лет назад

      @@Gomeazy ok