thank you so much for this trick. I was very afraid of messing up with loctite. this worked perfectly on my flippers. takes some steady hands an about 5 minutes and there's no curing!
sorry for the delayed response, you can use this trick on any hardware, but, the smaller the part, the harder it is to apply. I've done it in the past, I cut the tape into appropriately sized strips and that helps some.
I use the loctite tape its blue strength and perfect for what ur using the teflon for only it sticks enough to hold it perfectly tight but under pressure itll back right out its loctite #249 tape
thank you so much for this trick. I was very afraid of messing up with loctite. this worked perfectly on my flippers. takes some steady hands an about 5 minutes and there's no curing!
Dude sounds just like Philip Seymour Hoffman.
More like Buffalo Bill (silence of the lambs)
I was just about to say the same thing that's hilarious
I was just thinking the same thing! Then I read your comment, it's right on!
😂
White chocolate!!!
Make it rain!!!!
Thats great you saved me from a huge headache. Im usually not a loctite fan either. Thank you man!!!
sorry for the delayed response, you can use this trick on any hardware, but, the smaller the part, the harder it is to apply. I've done it in the past, I cut the tape into appropriately sized strips and that helps some.
That's a really good idea! Thanks for sharing.
Very good idea; I'll have to try this on my next knife. Thanks!
You're very welcome Racer. I think it should square you right away.! Thanks for watching, and for the sub!!
Thanks man just did this hope it sticks thank you! I trust your tip have a good day
Excellent tip, I'll gonna apply that to my Emerson and bench-made Subarossa.
Thanks :)
So weird, I was going to try this today and then this vid popped up in my subs, thanks man!
Thanks for the informative video , I was nervous about using loctite on the pivot .
900castillo well you can but literally use 1/5th of a drop and it'll break easily. Like just a tiny line will hold it in and it'll break.
I use the loctite tape its blue strength and perfect for what ur using the teflon for only it sticks enough to hold it perfectly tight but under pressure itll back right out its loctite #249 tape
Thanks for the tip, big guy!
@nuts4knives where did you get that spanner tool?
I have a Balisong knife and the pivot screws are smaller than usual. How do you suggest I should apply the tape?
-Sam
Carefully duh
VERY INFORMATIVE, THANKS.
Learning is awesome. Thanks.
Great tip 👍
Brilliant!
How long will this last?
Does it work on balisongs
What knife?
Mental alignment has begun, where/when will it end?
Thakns for subbin jbk52596
Thanks!
Doesn't work for longer than a day or 2