This One Simple Trick Will Help You Fit Massive Tires On Your Truck.
HTML-код
- Опубликовано: 1 окт 2024
- Guys I’m tired of seeing people hacking up their trucks to fit wheels and tires. I show you how to do it clean, and it’s actually super easy.
⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️
Get This exact same lift for your truck here ⬇️⬇️
www.amazon.com...
⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️
Here’s the exact tire and wheel setup I’m running on my truck⬇️⬇️
Atturo Trail Blade M/T (33x12.5r20)
www.amazon.com...
Ultra Motorsports X111 Gloss Black 20x12 (-44mm offset)
www.amazon.com...
Thanks for watching!
If you are wanting to support the channel and get yourself an awesome bumper check out my website!
voltageoff-road.squarespace.com
That beard, brutal bro. Let's trim that bad dog off after the fenders.
Just got a set of 35s...I have a bone stock 88 chevy 2wd....don't hate me the 2wd was cheap...with 80.000 miles on it...anyway..what size lift do I need to get...all the ones I can find cost more then the truck..lol
Get a 3.5 level kit. Some trimming in the front and presto
Appreciate the video!
I’m on a 3 inch level on my 2010 Silverado and I just bought 20x12 -51 what will I have to do?
Depends on tire size. I ran 20x12-44s on stock suspension on a rwd 2010 ranger. The difference is I ran a 295/40s instead of 33s.
@@reaganriddle1583 I’m running 33x12.5
Just put a self tapper it's all good lmfao
Heat with heat gun and push plastic liner in.
Would that be an alternative to cutting the liner?
@@bitty4770 yes
Before or after cutting off the fender and beating it back?
i wold never butcher my truck like that
Did you put on some lift kits? for the front tires if so what is the height?
Lift kits work well also!😂
That’s what I’ll do: lift kit, don’t want to cut into my truck!
Lol
Great video brother; i think im going to try it!
what brand lift did you put on?
Motofab. There’s a link to it in the description
Drop your best “your mom” joke, I’ll pin my favorite one!
you really should get off the moms, i just got off yours...
Does you truck have a lift
Is that factory suspension
I have a 2008 GMC Sierra, and I want to raise it up 3 or 4 inches with 33 inch tires. Do I still need to cut the fender and bumper?
Depends on the offset of the wheels but most likely yes. My dads gmc has a 6 inch lift with 33s and his rubs a little at full lock.
i just got 12 wide 33s on my 08 with a 3 inch level with -44 offset and they don’t rub terrible once you drive for a bit the insides of the fenders will bend in
what size lift is on your truck
What’s the offset on those 20x12
-44mm
For the sake of god 20s are SMALL
Thats me and baby brother in the parking lot he has a black widow gmc i have a lifted avalanche.
Man you’re talking about 33s like its something I’ve taken stock Silverado put some 2 inch level on the front did a Norcal and a bumper trim and fit 35s… only time it rubs is when I hit a bump going around to turn