Scion tc rear transmission mount replacement
HTML-код
- Опубликовано: 7 фев 2025
- Diy rear transmission mount replacement
06 tc
To reinsert bracket, face the opposite way, facing the front of car. Right arm screwing the top bolt in by hand from under the s pipe entry. Left arm from under by the s pipe entry holding the bracket.
Difficulty 4.5/5
Do at own risk . Remember. You need the right tools for the job!
You gave the most useful information of any video out there.
Just did this. Wd40 on hand helped a lot. The bolt on the bracket to the left was a pain in the azz. Took about 6hrs. I have big forearms that are all scratched up now
Thank god the gen 2s you can just do straight thru the bay 😮💨
Thank gawd the TC2 (2nd Gen, 2011 - 2016) is so much easier to do than on these 1st Gens.....You don't have to move or take off anything....and the mount comes out with barely any effort.
How long do you think it takes to change that mount on a TC2? I need to change mine out.
Yeah man, how long it took you? Im getting ready to do mines too!
I'm trying to do this same thing. If you don't mind me asking... How did you get the bolts back in, especially with the mount back in place?
That motor mount was designed by an idiot and it was a nightmare to get out. The welds on the studs came off so I couldn't remove the nut. I had to cut off the studs with a angle grinder to get it out. The first thing I did to reinstall the new one was chop off all the studs with a angle grinder. Then I replaced them with bolts that make it easy to install
emove. Stupid design!
Looks like a pain in the a#ss
my exhaust bolts are rust welded on my exhause :(
F this taking it to the shop. Too much work.
Same lol
But I thought u couldn’t take it off because the rack and piñons was in the way though u had take the whole front chassis out?