only need to fill up to 2GR level once. Drive around and it will go back down to Full line. From then, just top up as required (normally there is no need to top up unless there is a leak or overheating)
For this DIY, I didn't have to drain the coolant cause there was no coolant left since I removed the radiator. However, you should drain and refill just so there is no old coolant leftovers. The drain plug is on the bottom passenger side of the radiator. Just a black plastic plug. Turn it anti-clock wise to loosen.
Do i still need to fill up to 2GR level after driving a few days or just Full line on the right?
My car is 2GR. Thanks
only need to fill up to 2GR level once. Drive around and it will go back down to Full line. From then, just top up as required (normally there is no need to top up unless there is a leak or overheating)
@@TCsAnythingGoes Thank you
Thanks bro
Bro, can you show me how to remove and install centre aircond vent for vellfire Anh20?
Watching from Australia 🇦🇺
Hi TC’S
Do i need to drain the old coolant??
And where exact location of the drain plug?
Thank you Tc’s
For this DIY, I didn't have to drain the coolant cause there was no coolant left since I removed the radiator.
However, you should drain and refill just so there is no old coolant leftovers.
The drain plug is on the bottom passenger side of the radiator. Just a black plastic plug. Turn it anti-clock wise to loosen.
Where is the location of the bleeder coolant ? Thx
where's the bleeder plug location?
How long need to wait after start enjin.