I had talked to you about my 53 Ford F100 I built with my dad. We did the 01 to 10 Crown Vic swap. It went FANTASTIC and extremely smooth. It's mind blowing how easy it rolls under, drill a few holes and weld the rest in. AND ITS CHEAP!!! We gave $150 for an interceptor front end out of our junk yeard. I'd do it again if given the chance. If you do the CV swap you can push the front end forward an inch to center the wheels in the front wheel well. Plus it comes with the sway bar. And Monroe Air Max has a direc🎉t bolt in air shock from 53 to about 85 give or take rear air shock. I love them. Hope this helps and if you need more info lmk.
As a ford guy , I appreciate you taken the time and your pocket book to save this old girl!!! I know your a Chevy guy but once you get this truck and motor dialed in , it well give you lots of miles!!! Great video !!! Thanks!!
I still think with all the interruptions and wrong things sent or bad things sent, your content is still top notch! You do show the commonsense approach to getting these cars running without a million-dollar budget! Keep up the god work, and I will be watching your channel! You do show what and ift things do happen in everyday life! 👍👍👍
It's 6:30am Boxing Day and I just watched a man in the States rejuvenating an old truck. Waht a fantastic, interesting video. Thanks for the entertainment you supplied to me Chad, here's wishing you a merry Christmas and I hope bought you a spiffing new torque converter. God bless America
It’s looking good Chad, you’re doing a great job. I know you’re not, but don’t worry about those with negative comments , they aren’t doing this and they are paying for it. I can smell those burn outs! Keep up the great work. God bless you, I hope you had a Merry Christmas. See you soon
Hey hey y'all and Merry Christmas! I pray that everyone has had a wonderful holiday with your families and your day was spectacular! Spent my day flying solo aside from my 2 fur babies. Until next week... take care & God bless! ~ Scott 💙🙏🏼
Hi Chad. Nice wheels. About half way through the video you can see the new wheels on the right side so a dead give away. So got to see them before you showed them later in the video
Merry Christmas to you and yours. Thank you for sharing. In my opinion if it is a young company that does the converters give them a chance to make it right , but if they have been around for a bit don’t be afraid to call them out for being lax it their quality control.
Chad, dont listen to the know it all's. They'd happily spend all your money for you, then still criticize the build. i like what you're doing, no matter what you're working on. keep up the good work
On this CHRISTMAS DAY As we celebrate the birth of our lord and savior Jesus christ, we look forward to seeing 👀 the entertaining finish to the best-looking FORD built tough truck in TENNESSEE. OH YEAH@!!. Just a little MLS it wouldn't be right without it bless you sir and God bless God speed may he watch over you and keep you safe AMEN!!...--.
Chad I hate you had a problem with the converters! I’ve ran them for years now, but I did get mine a long time ago. Been 18 years and still counting. But this day that is my luck on anything I do now! As you say MLS yup I have it more now all the time. Great job
Hey Mr Chad. It seems like the old Ford is one problem after the next, but you seem to just keep working through them, I'm sure all your hard work will pay off. Oh and by the way, I Love those Classic Baby Moon Wheels. Those wheels make any old ride look good. Enjoyed the video!
Merry Christmas to Chad the rims and tires look good on the f100 hope you found your other cat. the heck with the negative Nancy's keep up the great work and videos 😊
Merry Christmas Chad I'm sorry you had such MLS with the torque converter but you saved the rest of us from dealing with that company and we appreciate it I was waiting to see how good it worked b4 I ordered a couple for builds I'm currently working on you saved me the headache ty sir
I have the polished aluminum version of those valve covers. The damn baffles come with a piece of thin plastic on each side of the baffle that will shrivel up once the engine gets hot if you didn't pull it off before installing. Found that out the hard way once I looked in when filling with oil after it ran for a while.
Hey I just want to say thank you I’ve had the flu since Sunday and I’ve rewatched a bunch of your old videos you mad a shitty Christmas a entertaining one Merry Christmas my man keep the good content coming. Also good point about how many builds you’ve done and the quality of parts you buy let the people say what they want there watching your videos
I dig the patina, there’s just something about that surface rust on an old truck that looks so good, I live in the rust belt so we usually have rust holes on the undercarriage and not much patina
One thing to look for on these early Ford transmissions is the drain plug in the converter has to line up with the corresponding hole in the flex plate
Merry Christmas
I had talked to you about my 53 Ford F100 I built with my dad. We did the 01 to 10 Crown Vic swap. It went FANTASTIC and extremely smooth. It's mind blowing how easy it rolls under, drill a few holes and weld the rest in. AND ITS CHEAP!!! We gave $150 for an interceptor front end out of our junk yeard. I'd do it again if given the chance. If you do the CV swap you can push the front end forward an inch to center the wheels in the front wheel well. Plus it comes with the sway bar. And Monroe Air Max has a direc🎉t bolt in air shock from 53 to about 85 give or take rear air shock. I love them. Hope this helps and if you need more info lmk.
The caps in the center of the wheels look awesome 👍.
As a ford guy , I appreciate you taken the time and your pocket book to save this old girl!!! I know your a Chevy guy but once you get this truck and motor dialed in , it well give you lots of miles!!! Great video !!! Thanks!!
Love them Ole FORD BUILT TOUGH TRUCKZ
A M E N ..OH YEAH.
I don't care what it is. If it is old and cool, that is all that matters.
The truck looks great chad keep up what you doing
Those tires and rims make a major difference on the truck. Looks good. Merry Christmas Chad. 😊
Wing window air con, nothing better .👍 no pumps, no gas, no electricity 😁
I still think with all the interruptions and wrong things sent or bad things sent, your content is still top notch! You do show the commonsense approach to getting these cars running without a million-dollar budget! Keep up the god work, and I will be watching your channel! You do show what and ift things do happen in everyday life! 👍👍👍
Personally I like the little hubcaps on those wheels, they look great,, but it’s your truck .👍
Man that old truck is looking tough
Outstanding and awesome content as always.Thanks for sharing and taking us along
Dang ya bringin back some old memories. Blessings from Texas
Thank you for sharing 👌 Hope you and your family had a blessed Christmas. Thank you for being you ❤️ 😊
I have a Ford and a Chevy. Ford is diesel. Chevy is a gas burner. They are both 3/4 ton. I love both of my trucks. Great content!
She's alookin mighty fine Chad ! MERRY CHRISTMAS ! We serve an AWESOME GOD and I appreciate you Brother !!! GOD BLESS !!!
And a very Merry Christmas to you Chad from our home to your home we will be watching next week Larry and Sandy!!!
Merry Christmas! It's good to watch someone else work while I'm finishing up my own day, especially on Christmas for some reason. 👍
It's 6:30am Boxing Day and I just watched a man in the States rejuvenating an old truck. Waht a fantastic, interesting video. Thanks for the entertainment you supplied to me Chad, here's wishing you a merry Christmas and I hope bought you a spiffing new torque converter. God bless America
Merry Christmas Chad! Wishing you a happy MLS free 2025!
It’s looking good Chad, you’re doing a great job. I know you’re not, but don’t worry about those with negative comments , they aren’t doing this and they are paying for it. I can smell those burn outs! Keep up the great work. God bless you, I hope you had a Merry Christmas. See you soon
I love seeing a project progress. It’s coming along great.
I have always been a day late, and a dollar short.
Merry Christmad Mr. Chad!
Hey hey y'all and Merry Christmas! I pray that everyone has had a wonderful holiday with your families and your day was spectacular! Spent my day flying solo aside from my 2 fur babies. Until next week... take care & God bless! ~ Scott 💙🙏🏼
Merry Christmas. to you. and your family and Happy New Year. Chad,
Hi Chad. Nice wheels. About half way through the video you can see the new wheels on the right side so a dead give away. So got to see them before you showed them later in the video
Merry Christmas Chad and don't worry about the cryers, do it your way, I'll be watching
Merry Christmas to you and yours. Thank you for sharing. In my opinion if it is a young company that does the converters give them a chance to make it right , but if they have been around for a bit don’t be afraid to call them out for being lax it their quality control.
Merry Christmas brother. Big Mike from Kentucky. Been waiting all day for your show
I like the backyard butchery thats the way its done. Cant wait for next week's episode!!! Merry Christmas!
I hope you had a great Christmas. I think that the ol girl is coming along swimmingly.
Merry Christmas man. Love the f one fifty build. Hope your knee is doing better.
Great wheels and tires choice love the baby moons it’s a good classic look
Chad, dont listen to the know it all's. They'd happily spend all your money for you, then still criticize the build. i like what you're doing, no matter what you're working on. keep up the good work
What an awesome Christmas surprise, Merry Christmas Chad.
One more week. .. great video. Merry Christmas
Keep the Baby Moons and go with a Crown Vic front end swap, you will Love it. The truck looks tought, Love it.
On this CHRISTMAS
DAY As we celebrate the birth of our lord and savior Jesus christ, we look forward to seeing 👀 the entertaining finish to the best-looking FORD built tough truck in TENNESSEE.
OH YEAH@!!. Just a little MLS it wouldn't be right without it bless you sir and God bless God speed may he watch over you and keep you safe AMEN!!...--.
Tires and wheels look good with the center caps hope you have a blessed Christmas
You build it the way you want don’t care what other people says I like it
😂after watching your videos my son is finally passing his Spanish class in school 😂😂 as always awesome video Chad
Merry Christmas to you as well. Good watch after a long day. See you next week.
Chad I hate you had a problem with the converters! I’ve ran them for years now, but I did get mine a long time ago. Been 18 years and still counting. But this day that is my luck on anything I do now! As you say MLS yup I have it more now all the time. Great job
Hope you and yours are having a merry Christmas Chad !!
Merry Christmas and Happy New Year Chad.
Backyard butchery on Christmas Day.This is great
Merry christmas everybody
Hi Chad. As usual I really enjoyed your latest post. I hope you and your family had a wonderful Christmas.
Love watching your videos. That going be kick butt truck
Merry Christmas Chad🎄 🎅
Merry Christmas!!!
Merry Christmas Chad, and all the fellow viewers and families! 🇺🇸🎄👍
Merry Christmas Chad my friend, great content to watch today, thank you so much 🥰
Merry Christmas Chad 🎄🎁
Watching from Texas
Merry Christmas 3 builds a year keep up the good work.
Love the rims! good stuff, valve covers are nice!
Merry Christmas from southern Illinois.
Hey Mr Chad. It seems like the old Ford is one problem after the next, but you seem to just keep working through them, I'm sure all your hard work will pay off. Oh and by the way, I Love those Classic Baby Moon Wheels. Those wheels make any old ride look good. Enjoyed the video!
Chad wishing you and your family a Merry Christmas! I certainly enjoy your videos.
Nice work.merry Christmas 🎄🎄🎄
I really like the rims and hub caps, keep them😁😁👍👍
You do you. You buy what you can. It's your Ford. Personally, don't own one. Merry Christmas! And I pray your MLS gets better.
Merry Christmas Chad
Hope u had a wonderfull Christmas and have a great new year. May the lord bless ur family. Keep doing ur stuff.
Wheels look great
Merry Christmas Mr Chad, I sure hope you have a good one with your family!
Chrome reverse rims and baby moons great choice Chad, Merry Christmas!!!
That torch works so good on those coil springs I could see the truck going down at 54:25 lolol
Merry Christmas enjoy watching your videos there really good
Merry Christmas she's looking good!
Hope you had a Great Christmas and hope you have a Great New Year. Take care and I'll see you next time.
And a Merry Christmas to you and yours also.
Merry Christmas to Chad the rims and tires look good on the f100 hope you found your other cat. the heck with the negative Nancy's keep up the great work and videos 😊
Merry Christmas looks awesome.
Merry Christmas Chad great video this week looking forward to next week video
Merry Christmas Chad from my family to yours!! 🎅
Enjoyed this episode ty very much
Merry Christmas Chad I'm sorry you had such MLS with the torque converter but you saved the rest of us from dealing with that company and we appreciate it I was waiting to see how good it worked b4 I ordered a couple for builds I'm currently working on you saved me the headache ty sir
best body man ever merry christmas happy new year ol pal
Merry Christmas Chad. Truck looking good.
I think ya did commendable and should just enjoy christmas as its that time of the year... may the new year bring you happiness
Thank you for another great video.
Merry Christmas and happy new year to you Mr Chad.
Merry Christmas Mr Chad !!
dont mess up the Headers 🤣
Youre doing good !!!
love to watch your videos
Greetings from Germany
WildRideMechanic
I have the polished aluminum version of those valve covers. The damn baffles come with a piece of thin plastic on each side of the baffle that will shrivel up once the engine gets hot if you didn't pull it off before installing. Found that out the hard way once I looked in when filling with oil after it ran for a while.
Hey I just want to say thank you I’ve had the flu since Sunday and I’ve rewatched a bunch of your old videos you mad a shitty Christmas a entertaining one Merry Christmas my man keep the good content coming. Also good point about how many builds you’ve done and the quality of parts you buy let the people say what they want there watching your videos
Merry Christmas and I can't wait for the next video of this truck
Love the videos merry Christmas 🎄🎁
A little elbow grease and an SOS pad will clean those wheels up real nice 👍 👌
Bon Pasco Chad. That mean Merry Christmas.
Enjoy your video all the way from Aruba.
👍
Merry Christmas Chad and your family
Looks nice for a old Ford i would drive it for sure
Merry Christmas 🎁
I dig the patina, there’s just something about that surface rust on an old truck that looks so good, I live in the rust belt so we usually have rust holes on the undercarriage and not much patina
Merry Christmas 🎁⛄
Merry Christmas 🎄
Awesome job Chad keep it up I think your kicking ass I hope u have a merry Xmas
On board with the smoothie and white letters ❤❤ !!! Bummer you can't get long tubes..
Merry Christmas Chad to you and your family Happy Holidays
Chad,glad you posted a video makes it a better day.
One thing to look for on these early Ford transmissions is the drain plug in the converter has to line up with the corresponding hole in the flex plate